Control equipment ETIREL
EVE - ETIREL
Control equipment ETIREL
Control equipment ETIREL
Power relays VS116K, VS316K
Application: Control signals in low-power circuits, combined with buttons, switches, for
automation systems
Advantages:
„„ Voltage range AC230 or AC / DC 24V,
„„ 1 module, DIN rail mounting
„„ Changeover contact 1x16A or 3x16A,
„„ Output status LED indication
Power relays VS116K, VS316K
Type
VS116K
VS316/230 V
VS316/24 V
A1 - A2 230V AC
A1 - A3 24V AC/DC
Code No.
002471211
002471220
002471225
Voltage
Un
AC230V / AC/DC 24V
AC230V
AC/DC 24V
VS116K
Number of
contacts
1P
3P
3P
Weight
[g]
58
84
84
Packaging
[pcs]
1/10
1/10
1/10
VS316K
Delay OFF without supply voltage CRM-82TO
„„ „True OFF“ relay - relay timing without supply voltage
„„ Sample of use: back-up source for Delay OFF in case of voltage failure (emergency lighting, emergency respirator, or protection of el. controlled doors - in case of fire)
„„ 2 time functions adjustable by rotary switch:
• a - Delayed return after disconnecting of supply
• e - Delayed start
„„ Time range (adjustable by rotary switch and fine setting by potentiometer): 0.1 s - 10
min
„„ Universal supply voltage AC/DC 12 - 240 V
„„ Output contact: 2x changeover/DPDT 8 A
„„ Output status indicated by LED (only in case of supply voltage connection)
„„ Clamp terminals
„„ 1-MODULE, DIN rail mounting
78
Technical data on page 109, 110
EVE - ETIREL
Control equipment ETIREL
Delay OFF without supply voltage CRM-82TO
Type
Code No.
CRM-82TO
002470074
U
t
t
U
t
Weight
[g]
93
Packaging
[pcs]
1/10
e - ON Delay
a - Delay OFF (S break) the
power supply is switched
off (min. time is 0.5 s)
Multifunction time relay CRM-91H, CRM-93H
Advantages
< 1-module, DIN rail mounted
< Universal supply voltage: AC/DC 12V - 240V
< 10 functions:
- 5 time functions controlled via supply voltage
- 4 time functions controlled via control input
- 1 function of memory (latching) relay
< Time scale 0.1 s - 10 days divided into 10 ranges
< User-friendly setting of functions and time via rotary switch
< Output contact:
CRM-91H 1x16A changeover
CRM-93H 3x8A changeover
< Output indication: multifunction red LED, flashing at certain states
Functions
a) Delay ON after energisation
b) Delay OFF after energisation
c) Cycler beginning with pause after energisation
d) Cycler beginning with impulse after energisation
e) Delay OFF after de-energisation, instant make of output
f) Delay OFF responding to make of control contact regardless its length
g) Delay OFF after break of control contact with instant output
h) Delay OFF after make and break of control contact
i) Memory (latching) relay
j) Pulse generator
Technical data on page 111
79
EVE - ETIREL
Control equipment ETIREL
Multifunction time relay CRM-91H, CRM-93H
Code No.
Type
In
[A]
CRM-91H
16
002470001
CRM-93H
8
002470002
Weight
[g]
68
93
Packaging
[pcs]
1/10
1/10
Time relay CRM-2H
Advantages
< 1-module, DIN rail mounted
< Universal supply voltage: AC/DC 12V - 240V
< 2 time functions:
- cycler beginning with pulse
- cycler beginning with pause
< Time scale 0.1s - 100 days divided into 10 time ranges
< Rough time setting by rotary switch
< Output contact: 1x 16 A changeover
< Output indication: multifunction red LED
Time relay CRM-2H
Type
CRM-2H
In
[A]
16
Cycler beginning with pulse
80
Code No.
002470003
Weight
[g]
68
Packaging
[pcs]
1/10
Cycler beginning with pause
Technical data on page
111, 113
EVE - ETIREL
Control equipment ETIREL
Delay ON star/delta relay CRM-2T
Advantages
 1-module, DIN rail mounting
 Supply voltage: AC/DC 12V - 240 V
 Generates motor starting cycle star-delta
 Time t1 (star)
- time scale 0.1 s - 100 days is divided into 10 time ranges
- rough time setting by rotary switch
- fine time setting by potentiometer (from 0,1 to1)
 Time t2 (delay) between star/delta:
- time range 0.1 s - 1 s is set by potentiometer
 Output contact: 2x 16 A (AC1)
 Output indication: multifunction red LED
Delay ON star/delta relay CRM-2T
Code No.
Type
In
[A]
CRM-2T UNI
3
002470013
Weight
[g]
95
Packaging
[pcs]
1/10
Delay ON star/delta
U
15-18
25-28
t1
t2
Staircase switch CRM-4
Advantages
< 1-module, DIN rail mounted
< Supply voltage: AC 230 V
< Protection against control push-button blocking
< Time range: 0,5 -10 min
< Selector switch:
- AUTO: normal function acc. to set time
- OFF: permanent off
- ON: permanent on
< Time setting via potentiometer
< Output contact: 1x 16 A changeover ( load up to 4000 VA/AC1)
Staircase switch CRM-4
Type
In
[A]
CRM-4
16
Technical data on page 114. 115
Code No.
002470012
Weight
[g]
53
Packaging
[pcs]
1/10
81
EVE - ETIREL
Control equipment ETIREL
Programmable staircase switch CRM-42
Advantages
 1-module, DIN rail mounted.
 Supply voltage: AC 230 V
 Intelligent staircase switch, the same use as CRM-4, but with increased possibility of
control. In mode ''PROG'' it is possible to select the time of delayed OFF by number of
button-pressing sequences. Each pressing multiplies the time set by potentiometer, which that the time is set to 5 min and the button is pressed on 3 times, the output is automatically prolonged to 15 min. The output can also be switched off earlier (reset) by a long pressing of button (longer than 2 sec)
 Output relay contact 16A/AC1 with inrush current up to 80 A enables switching of
electrical bulbs and also fluorescent lights.
 Selector switch:
- ON - Output permanent ON
- AUTO - timing according to adjusting by potentiometer in range of 30 s - 10 min
- PROG - timing with time prolongation option by a number of button pressing
Timing (in mode AUTO and PROG) can be stopped by long pressing
of the button (longer than 2 sec)
 Output indication: multifunctional red LED, flashing at certain states
Possibility to connect up to 100 buttons equipped with glow lamps
(up-to 100mA)
 3-wire or 4-wire connection (it is possible to control input S by potential A1 or A2)
Warning before switch OFF- output double flash 40 and 30 sec before switch OFF
Programmable staircase switch CRM-42
Type
In
Code No.
[A]
CRM-42
16
002470078
Weight
[g]
65
Packaging
[pcs]
1/10
Digital time switch SHT-1, SHT-1/2, SHT-3 and SHT-3/2
Advantages
< 2-modules, DIN rail mounting
< Daily, weekly program in one device (SHT-1; SHT-1/2)
< Daily, weekly, monthly, yearly program (SHT-3, SHT-3/2)
< Supply voltage AC230 V or AC/DC 12-240 V
< Switching: according to the program (AUTO)/constantly manual/
manually until next program change/random (CUBE)
< Automatic conversion summer/winter time
< Sealable cover of the front panel
< 100 memory places, clear LCD display
< Min. interval 1s
< Pulse/cyclic output
< Output contact: 1x 16A changeover → SHT-1, SHT-3.
< Output contact: 2x 16A changeover → SHT – 1/2, SHT-3/2.
Digital time switch SHT-1 and SHT-1/2
Code No.
Type
In
[A]
SHT-1 UNI
16
002470051
SHT-1 230V
16
002470050
SHT-1/2 UNI
16
002470054
SHT-1/2 230V
16
002470053
SHT-3 UNI
16
002470056
SHT-3 230V
16
002470055
SHT-3/2 UNI
SHT-3/2 230V
82
16
16
002470058
002470057
Weight
[g]
130
110
130
110
110
130
Packaging
[pcs]
1
1
1
1
1
1
110
130
1
1
Technical data on page 116, 117
EVE - ETIREL
Control equipment ETIREL
Analog electromechanical time switch APC-D1, APC-DR1
Advantages
n The APC time switch controls any electrical installation by means
of daily programs.
n Without (D1) or with (DR1) battery backup.
n Manual switch with permanent ON position.
n Supply voltage : AC 230V
n Sealable cover of frontal panel
n Output contact :1x NO 16A
n Simple dial time setting. Minimum switching time is 15 min.
n 1 module, DIN rail mounting.
Analog electromechanical time switch APC-D1, APC-DR1
Type
In
[A]
Code No.
Weight
[g]
Packaging
[pcs]
APC-D1
APC-DR1
16
16
002472001
002472002
87
87
1/10
1/10
Multifunction relay SMR-T, SMR-H, SMR-B
Advantages
< Multifunction relay designated for installation into a wiring box, under wall-switch into an existing installation (SMR-T doesn't need neutral to function)
< Fast solution for exchanging standard wall-switch for a switch controlled by time or for a memory relay controlled by a button
SMR-T
< 3-wire connection, works without neutral wire
< Output: 10-160 VA (resistive load)
< It cannot be used for fluorescent lights and energy saving lights (loads of capacitive type)
SMR-H
< 4-wire connection
< Output 0-200 VA
< It cannot be used for fluorescent lights and energy saving lights (loads of capacitive type)
SMR-B
< 4-wire connection
< 10 functions
< Output contact 1x16A / 4000 VA, 250V AC1
<Enables switching of fluorescent lights and also energy saving lights (see instruction manual technical data)
< Independent galvanically separated input AC/DC 5-250 V (for example for control from a security system)
Multifunction relay SMR-T, SMR-H, SMR-B
Type
Code No.
SMR-T
SMR-H
SMR-B
002470004
002470005
002470021
Technical data on page 118
Weight
[g]
29
31
53
Packaging
[pcs]
1/14
1/14
1/14
83
EVE - ETIREL
Control equipment ETIREL
Function
Function a - delay off on entering edge
output times when it is switched. Each following
pressing (max. 5x) increases time
Long pressing switches output off
Function b - delay off on downward edge
V
Function c - delay off on downward edge
S
after switching off output switches on and times.
V
Function d - cycler - flasher impulser
S
delay on after the switch is switched on
and delay on after it is switched off
2xt
t
V
Function g - pulse relay
V
Function e - puls shift
t
S
delay on after switch is switched on until it
is switched off
switches on by a press, another pressing switches the output S
off . The length of pressing doesn’t matter, it is possible to V
set reaction delay by a potentiometer and thus eliminate
rebound of a button
S
output times after button is switched off ,
switches immediately
output cycles in regular interval, cycler starts with an impulse
Function f - delay on
S
t
one press switches on, another one switches the output off
in case it is done before the end of timing
t
t
V
output cycles in regular intervals, cycler
starts with a gap
S
t
V
t
S
Function i - delay on after switched off
V t t t t t
V
S
Function h - impulse relay with delay
t t t t t t
S
Function j *- cycler starting with gap
delay on after switching on until it is de-energized or a
switch is pressed again.
V
t
t
*function j is valid only for SMR-B
Memory and latching relays MR-41, MR-42
Advantages
< 1-module, DIN rail mounted
< Supply voltage:
- UNI AC/DC 12V - 240V
-230 AC 230V
< Keeps state in memory when supply disconnected. When energized again, relay returns to the state before disconnecting.
MR-41
< Output contact: 1x changeover 16A/ AC1
MR-42
< Options - 2x paralel contacts or the other relay is latching
< Function selected via external wire link between B1-B2
< Output contact: 2x changeover 16A/ AC1
Memory & latching relays MR-41, MR-42
Type
Code No.
MR-41 UNI
MR-42 UNI
MR-41 230
MR-42 230
84
002470007
002470008
002470094
002470095
Weight
[g]
64
89
60
85
Packaging
[pcs]
1/10
1/10
1/10
1/10
Technical data on page123
EVE - ETIREL
Control equipment ETIREL
Dimmers - compatibility with various types of light bulbs
R
L
C
ESL
automatically
detects
type of load
Standard
and
halogen
light bulbs
Low voltage
light bulbs (1224V), wounded
transformer
Low voltage
light bulbs (1224V), electronic
transformer
Dimmable
Energy
Saving
Lamps
(ESL)
CATEGORY 1: „LOW
COST“ LED LAMPS MULTILED SYSTEMS
WITH INTEGRATED
LINEAR POWER SUPPLY
CATEGORY 2: 1-3
DIMMABLE POWER
LED LAMPS WITH
INTEGRATED SWITCHING
POWER SUPPLY
DIM-2







DIM-14







DIM-15







SMR-M







SMR-S







SMR-U







Product
LED
Staircase switch with dimming DIM-2
Advantages
< 1-module, DIN rail mounted
< Supply voltage AC 230V
< Function of gradual dim-up and dim-down, controlling inputs for push button and switch
< Protection against button dead locking
< Potentiometers adjust:
- speed (fluency) of switching on
- maximum intensity of light
- time of maximum intensity light
- speed (fluency) of switching off
< Contactless output: 1x triac
< Load AC1 2A / 500W
Staircase switch with dimming DIM-2
Type
Code No.
DIM-2
Technical data on page 124
002470009
Weight
[g]
70
Packaging
[pcs]
1/10
85
EVE - ETIREL
Control equipment ETIREL
Dimmer DIM-14
Advantages
„„ 1-module, DIN rail mounting
„„ Supply voltage: AC 230 V
„„ Designed for dimming of electrical bulbs and halogen lights with wound
or electronic transformer
„„ For switching and dimming of lights, control inputs for a button
„„ Short pressing switches ON/OFF, longer pressing (more than 0.5 s)
enables gradual light intensity setting when switched off, brightness level
is stored in a memory and when switched on again last brightness level is
restored
„„ Output without contacts: 2x MOSFET
„„ LED output indication (with any level of brightness)
„„ Possibility of parallel connection of control buttons
„„ Resistive, inductive or capacitive load, up to 300 W, for a short term up to
500 W
„„ Simultaneous connection of inductive and capacitive load is not allowed.
„„ Electronic overvoltage protection
„„ Protection against temperature overrun inside a device – output off and
signalization of overheat by LED flashing
Dimmer DIM-14
Type
DIM-14
In
[A]
2
Code No.
002470023
Weight
[g]
58
Packaging
[pcs]
1
Dimmers for LED bulbs and dimmable fluorescent lamps DIM-15 and SMR-M
Advantages
< Designated for dimming of:
a) LED bulbs and LED light sources
b) dimmable saving fluorescent lamps
< Enables gradual setting of luminance by push-button (non-detent) or parallel buttons
< Returns to last state upon re-energization
< Type of light source (LED or saving fluorescent lamp) is set by switch-over on the front panel of device
< Minimal luminance, set by potentiometer on the front panel, eliminates flashing of some types of
saving fluorescent lamps
DIM-15
< Supply voltage 230V AC
< Output status is indicated by red LED:
- shines when output is active
-flashes while heating overload, at the same time output is disconnected
< 1-MODULE version, DIN rail mounting, saddle terminalh)
SMR - M
< Button-controlled dimmer intended to be installed in an installation box (e.g. KU-68) into the existing electrical wiring
<Protection against excessive temperature inside the device - switches off the output
Dimmer DIM-15, SMR-M
Type
Code No.
DIM-15
SMR-M
86
002470290
002470291
Weight
[g]
57
38
Packaging
[pcs]
1/10
1/14
Technical data on page 125, 126
Control equipment ETIREL
EVE - ETIREL
Dimmer SMR-S, SMR-U
Advantages
< Button-controlled dimmers designated for flush mounting into a wiring box, into an
existing installation (SMR-S doesn´t need neutral to function)
< Controlling lamp brightness
<Dimming, control from more places (parallel button connected), possible protection
against temperature overrun inside the device – output off.
< By changing wall-switch for a switch with SMR-S/SMR-U installed below effective
brightness control can be reached. SMR-S enables dimming of electrical bulbs and
wound transformers 12V, halogen lights (inductive load), SMR-U also enables dimming
of electronic transformers 12V, halogen lights (capacitive load). It cannot be used for
dimming fluorescent lights or energy saving lights.
SMR-S
< 3-wire connection, functional without neutral
< Max. load: 300 VA (resistive loads)
< Contactless output -1x triac
< With exchangeable fuse
SMR-U
< 4-wire connection
< Max. load: 500 VA
< Contactless output - 2x MOSFET
< Electronic overload and overtemperature protection – output off in case of shortcircuit or overvoltage
Dimmer SMR-S, SMR-U
Type
SMR-S
SMR-U
Code No.
002470010
002470022
Weight
[g]
32
32
Packaging
[pcs]
1/14
1/14
Twilight switch in IP65 ETS-16b
Application
Used for remote control of external lighting. time delay
prevents accidental activation of the short-term changes in the intensity
lighting. Designed to be mounted on a flat surface (eg a wall, disc).
Advantages:
„„ robust and simple design,
„„ adjustable-sensitivity threshold,
„„ IP 65
Twilight switch in IP65 TS-16b
Type
ETS-16b
Code No.
002471102
Technical data on page 121, 122
Weight
[g]
160
Packaging
[pcs]
1/10
87
EVE - ETIREL
Control equipment ETIREL
Twilight switch SOU-1 + sensor
Advantages
< 1-module, DIN rail mounted
< Supply voltage: AC 230 V
< Switches according to level ambient light intensity
< Adjustable time pause to eliminate short-term illumination peaks
< Adjustable level of light intensity in 2 ranges 100-50000 Lx and 1-100 Lx
< Controlling input for additional control inputs, e.g. time switch
< External sensor, protection degree IP55, suitable for mounting on the wall (supplied by switch)
< Output contact: 1x changeover 16A / AC1
<LED output indication
Twilight switch SOU-1
Type
Code No.
Weight
[g]
SOU-1
002470011
65
* Sensor for twilight switch SOU-1 also available separately (code No. 002470052)
Sensor tolerance ±33%
Packaging
[pcs]
1
Twilight switch with digital time switch SOU-2 + sensor
Advantages
„„ 2-module, DIN rail mounting
„„ Supply voltage: AC 230 V
„„ Adjustable light intensity 1-50000 lx
„„ Serves for control of lights on the basis of ambient light intensity and
real time (combination of SOU-1 and time switch clock SHT-1 in one
device)
„„ The advantage of real time consists in the blocking function of the
twilight switch in the case of an uneconomical use of lights (night
hours, weekends etc.)
„„ Function of random switching enables simulation of presence when
nobody is in the building
„„ Switching: according to the program (AUTO) /permanently manual
/ random (CUBE)
„„ External sensor IP56 is suitable for mounting on the wall/ in panel
(cover and sensors are part of delivery)
Twilight switch with digital time switch SOU-2 + sensor
Type
In
Code No.
Weight
[A]
[g]
SOU-2 + senzor
16
002470020
130
Packaging
[pcs]
1
* Sensor for twilight switch SOU-1 also available separately (code No. 002470052)
Sensor tolerance ±33%
88
Technical data on page 128, 130
Time switch ASTROCLOCK-2
EVE - ETIREL
Control equipment ETIREL
New!
Description
The ASTROCLOCK-2 is a time switch designed to control luminous loads in function of
dawn and dusk times. It includes a program that automatically adjusts the dawn lightingup and dusk switching-off times, without sensors and any need for maintenance. The geographic position location is set up by entering geographic coordinates of location where
operating or with selecting nearest city from built in list. This product successfully replaces
twilight switches with dusk(light) sensor (photo cell).
Its small size of only two modules makes it ideal for installation on distribution boards with
little available space. The unit includes 40 memory spaces in two independent circuits that
can be programmed in an astronomic or with fixed time operation or combination.
Advantages
„„ 2 module – DIN rail mounting.
able lithium battery(included).
„„ Supply voltage: 230V 50/60 Hz.
„„ High-contrast backlit display.
„„ Two independent programmable
„„ Menu languages: ENG, SLO, HR/SRB/
output contacts 2x16A (AC1).
BiH, POL, RUS.
„„ 40 daily and weekly programs with
„„ Countries with biggest cities directly supastronomical or fixed-time manoeuvres.
ported: Poland, Slovenia, Estonia, Lithu„„ Daily astronomical adjustment with
ania, Latvia, Russia, Ukraine, Bosnia and
offset possibility(±delay).
Herzegovina, Croatia, Macedonia, Serbia.
„„ Option of automatic switching be- „„ Other cities and countries supported
through entering geographic coordinates
tween summer and winter time.
(zone latitude and longitude).
„„ Backup power supply: Interchange-
Time switch ASTROCLOCK-2
Type
In
Code No.
[A]
ASTROCLOCK-2
16
002472051
Spare battery 1/2 AA can be ordered under reference code: 002472054
Weight
[g]
166
Packaging
[pcs]
1/120
Digital time switch ETICLOCK-R1
Description
ETICLOCK-R1 is a digital time switch designed to control an electrical installation. Different types of operations: ON and OFF at a set time, shortterm operations or pulses (1 to 59
seconds) and repetitive cycles (1 to 59 seconds or 1 minute to 23 hours and 59 minutes)
applied to one channel (C1). It includes a series of additional functions such as: automatic
DST changes, 4 holiday periods, adjustable screen brightness. Menus can be displayed in
several languages (ENG, SLO, HR/SRB/BiH, POL, RUS). One voltage free changeover output
(channel) allows programming of up 40 operations (programs).
Advantages:
„„ R
ated voltage and frequency: As indicated
on the device (230 V AC 50-60Hz)
„„ Voltage free programmable changeover
output contact: 1x16 (10) A / 250 V AC
„„ Automatic DST change by country can
be disabled
„„ On-screen operating schedule
„„ Display screen: Back-lit LCD, Menu languages: English, Slovenian, HR/SRB/
BiH , Polish, Russian.
„„ Memory spaces: 40 programs (operations)
„„ Power reserve:
• 1
0 years (with exchangeable battery
and no network connection)
• 48 h (without battery or empty and
no network connection)
„„ Types of operations: ON/OFF, PULSE
(1 to 59 sec.) and CYCLES (1 to 59 sec. or
1 min to 23h and 59 min)
„„ Size: 2 DIN modules (35 mm)
Digital time switch ETICLOCK-R1
Type
In
Code No.
[A]
ETICLOCK-R1
16
002472053
Spare battery 1/2 AA can be ordered under reference code: 002472054
Technical data on page 131, 132
Weight
[g]
136
Packaging
[pcs]
1/10
89
EVE - ETIREL
Control equipment ETIREL
Current monitoring relay PRI-51
Advantages
To monitor heating of rods in shunts, heating of cables, to indicate current
flowing, to monitor consumption of one-phase electrical loads
 1-phase, 1-module, DIN rail mounting
Universal supply voltage AC 24 V - 240 V and DC 24 V
 Output contact: 1x changeover 8 A/AC1
Supply is not galvanically separated from measured current, it must be in
the same phase
Adjustable delay 0,5 - 10 s to eliminate short current peaks
 Fluent adjusting actuating current via potentiometer, choice of 5 ranges: AC 0.1-1 A,
AC 0.2-2 A, AC 0.5-5 A, AC 0.8-8 A, AC 1.6-16 A
Current monitoring relay PRI-51
Type
In
[A]
PRI - 51/1
1
PRI - 51/2
2
PRI - 51/5
5
PRI - 51/8
8
PRI - 51/16
16
Code No.
002471816
002471817
002471818
002471819
002470019
Weight
[g]
58
58
58
58
58
Packaging
[pcs]
1/10
1/10
1/10
1/10
1/10
Voltage monitoring relay HRN-33, HRN-34, HRN-35
Advantages
Serves to control/monitor supply voltage for appliances sensitive to supply
tolerance, protects devices against under/over voltage
 1-module, DIN rail mounting, 1-phase monitoring
Supply from monitored voltage (monitors level of its own supply)
3-state indication - LEDs indicating normal state and 2 fault states
Adjustable time delay for all types is 0 - 10 s (to eliminate short voltage drops or
peaks) voltage Umin adjusted as % of Umax
 Time delay and voltage adjusted via potentiometer
 HRN-33
- monitors voltage in range AC 48 - 276 V
- Umax and Umin can be monitored independently
 HRN-34
- like HRN-33, but voltage range is DC 6 - 30 V
- monitoring of battery circuits (12, 24 V)
 HRN-35
- like HRN-33, but independent output relays for each voltage level
- switching of other loads possible
Voltage monitoring relay HRN-33, HRN-34, HRN-35
Type
In
Code No.
Weight
[A]
[g]
HRN-33
16
002470015
73
HRN-34
16
002471400
73
HRN-35
16
002471401
85
90
Packaging
[pcs]
1/10
1/10
1/10
Technical data on page 133, 134
EVE - ETIREL
Control equipment ETIREL
Over/undervoltage monitoring relay HRN-54, HRN-54N
Advantages
 Serves to monitor voltage , phase failure and sequence in switchboards, protection of devices in 3-phase mains
 1-module, DIN rail mounting
 It is possible to set upper and lower level of monitoring voltage
Adjustable time delay eliminates short voltage peaks and failures in the mains
Faulty state is indicated by red LED and by breaking output relay contact
 Output contact: 1x changeover 8 A /250 V AC1
If the supply voltage falls below 60 % Un (Uoff lower level) the relay immediately breaks with no delay
HRN-54 - supply from all phases which means that the relay is functional also in case when one phase is
faulty
HRN-54N - supply L1-N, means that relay monitors also failure of neutral wire
Over/undervoltage monitoring relay HRN-54, HRN-54N
Code No.
Weight
Type
In
[A]
[g]
HRN-54
8
002471416
69
HRN-54N
8
002471412
67
Packaging
[pcs]
1/10
1/10
Level switch HRH-1
Advantages:
Serves for level monitoring in wells, tanks,
pools, reservoirs....
Options:
- single switch with single-state monitoring
- single switch with double-state monitoring
- 2 independent switches with singlestate switching
 Selectable by DIP switch:
- drain in
- drain away
- combination
Level switch HRH-1
Type
Code No.
HRH-1
002471701
Adjustable time delay when activated
by level change, type selectable by DIP
switch.
 Sensitivity adjustable by potentiometer.
Frequency 50 Hz prevents liquid polarization and increased oxidation of
measuring probes.
 Supply AC 230 V, AC/DC 24 V or AC 110V
Output contact: 2x changeover 16 A
/250 V AC1
Weight
[g]
Packaging
[pcs]
250
1
Sensors HRH
Sensors HRH
Type
Sensor SHR-1-M
Sensor SHR-1-N
Sensor SHR-2
Sensor SHR-3
Sensor HRH-10
Sensor HRH-15
Sensor HRH-20
Sensor HRH-30
Sensor HRH-40
Code No.
Description
002471205
002471709
002471203
002471230
002471703
002471704
002471705
002471706
002471707
Brass sensor without cable, max. wire profile 2,5mm2, op. temp.(-25 to...+60°C)
Stainless steel sensor without cable, max. wire profile 2,5mm2, op. temp.(-25 to...+60°C)
Stainless steel sensor without cable, max. wire profile 2,5mm2 - IP68, op. temp.(+1...+80°C)
Stainless steel sensor with 3m cable PVSC 2x0,75mm2 - IP67, op. temp. (< 95°C)
Sensor with 10m cable
Sensor with 15m cable
Sensor with 20m cable
Sensor with 30m cable
Sensor with 40m cable
Technical data on page 136, 137
Weight
[g]
9,7
9,7
48,6
239
30
35
40
48
62
Packaging
[pcs]
1
1
1
1
1
1
1
1
1
91
EVE - ETIREL
Control equipment ETIREL
Level switch HRH-5
Advantages:
Relay is designated for monitoring levels
in wells, reservoirs, pools, tanks....
In one device you can choose the following configurations:
- one-level switch of conductive liquids
(by connecting H and D)
- two-level switch of conductive liquids
One-state device monitors one level, twostate device monitors two levels (switches
on one level and switches of on another
level).
 Choice of function PUMP UP, PUMP DOWN
Level switch HRH-5
Type
Code No.
HRH-5
002471715
Adjustable time delay on the output (0.5 10s)
Sensitivity adjustable by a potentio-meter
(5-100kΩ
Measuring frequency 10Hz prevents polarization of liquid and raising oxidation
of measuring probes
Galvanically separated supply voltage
UNI 24.. 240 VAC/DC
Output contact 1xchangeover 8A/250V AC1
1-module type, mounting onto a DIN rail
Weight
[g]
Packaging
[pcs]
72
1/8
Thermostat relay TER-3 (A, B, C)
Advantages
„„ 1-module, DIN rail mounting
„„ Red LED indicates status of output, green LED indicates energization of the device
„„ Single thermostat for temperature monitoring and regulation in range of -30..
+70°C in six ranges
„„ Can be used for monitoring temperature e.g. in switchboards, heating systems,
cooling systems, liquids, radiators, motors, devices, open spaces etc.
„„ Function of short-circuit or sensor disconnection monitoring
„„ Possibility to set function''heating''/''cooling'' ( setting is done by DIP switch)
„„ Adjustable hysteresis (sensitivity) , switching by potentiometer in range 0.5 -5 K
„„ Universal supply AC/DC 24V -240 V, not galvanically separated
„„ Output contact: 1x NO 16 A /250 V AC1
„„ It is possible to place the sensor directly on terminal block – for temperature monitoring in a switchboard or in its surroundings
„„ Choice of external thermo sensors with double insulation in standard lengths 3, 6
and 12 m
Thermostat relay TER-3 (A, B, C)
Type
temp. range or
sensor length
Code No.
Weight
[g]
Packaging
[pcs]
-30...+10 0C
0...+40 0C
002471801
002471813
73
73
1/10
1/10
TER-3C
+30...+70 0C
*Note: Order sensor TZ from the table below
002471802
73
1/10
TER-3A
TER-3B
92
Technical data on page 138, 139
EVE - ETIREL
Control equipment ETIREL
Multifunction digital thermostat TER-9
Advantages
„„ Digital thermostat with 6 functions and in-built time
switch clock, with daily and weekly program ( as SHT-1).
Thermo functions can be managed also in real time
„„ Complex control of heating and water heating in buildings, solar heating etc
„„ 2 thermostats in one, 2 temperature inputs, 2 outputs with
potential free contact
„„ Functions: two independent thermostats, 1x dependent,
differential thermostat, 2-stage thermostat, thermostat
with dead zone, heating functions
Multifunction digital thermostat TER-9
Type
In
Code No.
[A]
TER-9 24V AC/DC
8
002471803
TER-9 230V AC
8
002471824
*Note: Order sensor TZ from the table below
Thermal sensors TZ
Type
lenght of sensor cable
[A]
0,11 m.
sensor TZ-0
3m.
sensor TZ-3
6m.
sensor TZ-6
12 m.
sensor TZ-12
Code No.
002471809
002471810
002471811
002471812
„„ Program setting of output function, calibration of sensors
according to reference temperature (off set)
„„ Thermostat is inferior to a program of digital switch clock
„„ 2 -module, DIN rail mounting
„„ Supply AC 230 V or AC/DC 24 V galvanically separated
„„ Output contact 1x changeover 8 A / 250 V AC1 for each output
„„ Memory for the most often used temperatures
„„ Well-arranged display of set and measured data, illuminated LCD by backlight
„„ Zero error when value setting
„„ Function of monitoring short-circuits or sensor disconnection
Weight
[g]
140
140
Weight
[g]
4,5
103
216
418
Packaging
[pcs]
1
1
Packaging
[pcs]
1
1
1
1
Thermostat for monitoring temperature of motor winding TER-7
Advantage:
 Monitors temperature of motor winding of motors with built in PTC sensor
 Fixed levels of switching
 MEMORY function - active by DIP switch
 RESET of faulty state:
- button on the front panel
- by external contact ( remote by two wires)
 Function of short-circuit or sensor disconnection monitoring, red LED flashing
indicates faulty sensor
 Output contact: 2x changeover 8 A /250 V AC1
 Red LED shines and indicates exceeded temperature
 Multivoltage supply AC/DC 24-240 V (UNI)
 1-module, DIN rail assembly possible
Termostat relay TER-7
Type
Code No.
TER-7
002471804
Technical data on page 141, 140
Weight
[g]
65
Packaging
[pcs]
1/10
93
EVE - ETIREL
Control equipment ETIREL
Hour meter HM-1
Aplications
 Gen-sets
 Compressors
 Pumps
 Medical equipment
 Control panels
 Air conditioning
Advantages
 2-module size
 DIN rail mounting
 Long lifetime
 IP40 protection – front
 Operating voltage 230V AC
Hour meter HM1
Type
Supply voltage
[Ue AC]
HM-1
Code No.
230
Weight
[g]
35
002472045
Packaging
[pcs]
1
Pulse counter PC-1
Applications:
 General event counter
 Switching operations counter
Pulse counter
Type
Advantages:
 Base mounting
 Heavy duty version
 6-digit totalizer
 IP31 protection
Supply voltage
[Ue AC]
Code No.
230
002472046
PC-1
Weight
[g]
60
Packaging
[pcs]
1
Power supplies PS-30
Description
„„ galvanically separated
„„ AC/DC switching stabilized power supplies, 3-module size, DIN rail mounting
„„ PS-30-12 - stabilized power supply with fixed output voltage 12 V/30 W (2,5A)
„„ PS-30-24 - stabilized power supply with fixed output voltage 24 V/30 W (1,25A)
Advantages
„„ Output current is limited by electronic fuse, in case maximal current is exceeded,
the device switches off and after a shot time interval it again switches on.
„„ Indication of output voltage by green LED on front panel
„„ Temperature protection – if temperature is exceeded, the device switches off
and after cooled down, it switches on again.
AC 100 - 250 V
50 Hz/ 60 Hz
N
L
Switching power supply PS 30W
Uout[V]
Type
Iout[A]
AC
DC
+
94
PS-30-12
PS-30-24
2,5
1,25
12
24
Code No.
002470132
002470133
Weight
[g]
160
160
Packaging
[pcs]
1
1
Technical data on page 144, 146
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising