Soul Shaker Owner`s Manual

Soul Shaker Owner`s Manual
MORE THAN MUSIC
SOUL SHAKER
GoRave 100W Wireless Subwoofer
Owner’s Manual
Installation and Operation
Version 1.0 / 03-04-2017
A product by Levven
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
Table Of Contents
1. Introduction / Installation
5. Troubleshooting
1.1 Thank You
3
5.1 Power/Standby LED Not Lit
10
1.2 Safety Precautions
3
5.2 No Sound Playing from Soul Way
10
2. Components Guide
6. Specifications
2.1 Box Contents
4
2.2 Sound Bar Components
4
3. TV Setup
Soul Way Technical Specifications
7. Warranty
Limited Manufacturer Warranty
3.1 Connect USB to Power
5
3.2 Connect to TV
5
7. Warranty
3.3 Setup the Soul Way Sound Bar
6
Limited Manufacturer Warranty
3.4 Cluster with Soul Shaker Subwoofer
6
3.5 Setup Infrared Remote Control
7
4.1 Quick Start Guide
7
8. FCC Statement
4.2 Pair/Bond Button and LED Indicator
8
FCC and IC Statements
4.3 Playing from Smartphone or Tablet
8
4.4 Playing from Mac OS Computer
8
4.5 Playing from Windows Computer
8
4.6 Add Audio Sender to Favorites List
9
4.7 “All Play” Mode
9
4.8 Selecting Different Audio Sender
9
4.9 Reset / Clear all Pair/Bond Settings
9
4.10 Firmware Update
10
4.11 Compatibility with Other Audio Products
10
11
14
8. Certifications and Approvals
Certifications and Agency Approvals
4. Playing from non-TV sources
10
12
12
2
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
1.Introduction
1.1
Thank You
Thank you for the purchase of your GoRave Soul Shaker subwoofer. This manual provides basic installation and operating instructions. The manual will help you experience the performance your subwoofer was designed to produce.
1.2
Safety Precautions
►► Carefully read this manual before connecting or operating your GoRave Soul Shaker subwoofer. Keep this manual for
later reference.
►► To reduce the risk of fire or electric shock, do not expose this product to rain, liquids, or moisture. Liquids can cause product failure and fire. Do not spill liquids onto any part of the system.
►► Connect your Soul Shaker to the power outlet only with the supplied 2-pin power cable. Do not modify the supplied cable
in any way. To safely disconnect the power cable, first disconnect the plug from the wall receptacle and then remove the
cable from the sound bar. Do not crush, pinch, bend at severe angles, expose to heat, or damage the power cable in any
way.
►► Do not place near radiators, heating registers, stoves, or other appliances that produce heat.
►► There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Stop using the GoRave Soul
Shaker and have it inspected and/or serviced by qualified service personnel if:
• The power supply cord or plug has been damaged.
• Objects have fallen into or liquid has been spilled into the unit.
• The unit has been dropped or damaged in any way.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQE DE CHOC ELECTRIC
NE PAS OUVRIR
3
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
2. Components Guide
2.1
Box Contents
Soul Shaker 100W powered subwoofer
AC power cable
Operating instruction manual
2.2
Subwoofer Components
B
C
F
G
D
A
E
Physical Dimensions: 15.9” (405mm) high x 14.3” (362mm) deep x 10.3” (261mm) wide
Feet: 1.2” (30mm) Weight: 26.9 lbs (12.2 kg) shipping weight
Back Panel:
C
A Pair/Bond button (with LED status
indicator)
B Vented MDF enclosure for optimal lowfrequency bass response
SOUL SHAKER
D
C Volume dial for direct control
E
D Crossover frequency selection dial
E Phase selection switch
F 8-inch downward-firing woofer
H
G 30mm feet to provide airflow for bass
H Power LED indicator
I Power on/off switch
K
J AC power cord (mains lead) connection
K USB service port
I
J
4
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
3. Playing from Smartphones, Tablets, and Computers
3.1
Quick start guide
a) Insert a GoRave Audio Sender into your source device (smartphone, tablet, TV, laptop).
b) Play audio on your device.
c) Double-click the Pair/Bond button on the Soul Shaker. The LED status indicator should turn bright amber and you will hear
your audio playing from the Soul Shaker subwoofer.
d) Use the crossover and volume adjustment controls on the subwoofer’s back panel to suit your listening style.
e) Press and hold the Pair/Bond button for 3 seconds to add your Audio Sender to the Soul Shaker’s Favorites List. The LED
will turn bright green.
f) Press the Pair/Bond button four times to put the Soul Shaker into “All Play” mode. The LED will turn red.
3.2
The Pair/Bond Button and LED Status Indicator
Connect Button:
Status:
Single Click
Playing or waiting to play from an Audio Sender on the
Favorite List.
(dim green)
(bright green)
= waiting
= playing
Double Click
Playing or waiting to play from an Audio Sender that has
not yet been added to the Favorite List.
(dim amber)
(bright amber)
= waiting
= playing
Hold
Add or remove an Audio Sender from the Soul Shaker’s
Favorite List by pressing and holding the connect button
for 4 seconds.
to
(flashing red)
4 Clicks
RECOMMENDED MODE: put the Soul Shaker into “All
Play” mode to play from any Favorite Audio Sender without manually pressing Connect button each time.
(dim red)
(bright red)
= waiting
= playing
6 Clicks
Clear the Favorites List and reset volume settings.
(flashing red)
= list reset
3.3
LED Indicator:
= added Favorite
= deleted
Playing audio from a smartphone or tablet device
a) Insert a mobile GoRave Audio Sender into your smartphone or tablet device. If you are using a 30-pin Apple device, (e.g.
iPhone 4S) install the GoRave app from the Apple iTunes Store.
b) Start playing audio on the device. At this point, the device is transmitting audio via the Audio Sender.
c) If the Audio Sender is the only one transmitting and it has been added to your Soul Shaker’s Favorites List, then you will hear
your audio play from the subwoofer.
d) If the Audio Sender has not been favorited, follow the instructions in Section 3.6 to add your Audio Sender to the Soul
Shaker’s Favorites List.
e) If the Audio Sender is not the only one transmitting and your Soul Shaker is playing audio from another source, follow the
instructions in Section 3.8 to hear audio from a different Audio Sender.
f) The GoRave app will list the GoRave Receivers the device is connected to. In the app, you can control the volume of each
Receiver as well as Master Volume up/down.
3.4
Playing audio from a MacOS computer (USB Audio Sender)
5
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
a)
b)
c)
d)
e)
f)
g)
h)
i)
Owner’s Installation and Operation Manual
Insert the USB Audio Sender into the Mac’s USB port.
Play audio on the device.
Click the Apple in the top left corner of the screen and choose “System Preferences”.
Click on “Sound”.
In the Sound settings screen, click the “Output” tab.
Select “SKAA Transmitter” from the list of audio output devices.
Adjust the volume to desired level.
Play an audio file on your Mac and follow the Favorite List process in Section 3.6 to add this USB Audio Sender to the Soul
Shaker’s Favorites List.
After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the Soul Shaker to
“All Play” mode.
3.5
Playing audio from a Windows computer (USB Audio Sender)
a) Insert the USB Audio Sender into the Windows device. It will automatically install the required drivers and enable wireless
audio transmission.
b) Play audio on the device.
c) Adjust the volume on the device to desired level.
d) Follow Section 3.6 to add this USB Audio Sender to the Soul Shaker’s Favorites List.
e) After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the Soul Shaker into
“All Play” mode.
3.6
Add an Audio Sender to the Favorites List
Soul Shaker subwoofers can save a list of favorite Audio Senders. If an Audio Sender is not on the favorites list, the Soul Shaker
may not play your audio. Go to gorave.com/support and select “Quick Start Guide” for a quick Favorites List video tutorial.
a) To add an Audio Sender to the Soul Shaker’s Favorites List, connect the Audio Sender to a device and start playing audio.
b) The LED status indicator on the Soul Shaker should be a dim amber or dim green to indicate that it is exploring for new Audio
Senders. Double click the Connect button on the Soul Shaker to search for the transmitting, non-favorite Audio Sender. The
LED indicator will flash bright amber when it discovers the Audio Sender signal.
c) When you hear your audio playing from your Soul Way, press and hold the Pair/Bond button for four seconds to save your
Audio Sender in the Favorites List.
d) The LED status indicator will turn solid green to indicate audio is playing from a favorite Audio Sender.
e) After you add the USB Audio Sender to the Favorites List, press the Pair/Bond button four times to return the Soul Shaker
into “All Play” mode.
3.7
“All Play” mode
“All Play” mode is the easiest way to use GoRave when you have more than one Audio Sender in your space.
After you add or remove an Audio Sender from an Soul Shaker’s Favorites List, press the Pair/Bond button four times to put the
Soul Shaker into “All Play” mode. The LED status indicator will turn red. The Soul Shaker will automatically play from any transmitting Audio Sender in its Favorites List without having to manually press the Pair/Bond button.
Soul Shaker receivers can play with one Audio Sender at a time. Disconnect the first Audio Sender when you want a Soul Shaker
to detect and play audio from a second Audio Sender.
6
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
3.8
Owner’s Installation and Operation Manual
Select a different Audio Sender when another is already playing
a) The easiest way to change audio sources is to disconnect the Audio Sender from the first device, then connect and play from
a second.
b) Activate “All Play” mode so the Soul Shaker will automatically play from any transmitting Audio Sender in the favorites list.
c) To manually control audio playback from the Soul Shaker:
(i) single click the Pair/Bond button to switch to the next transmitting favorite Audio Sender
or
(ii) double click on the Pair/Bond button to switch to the next transmitting non-favorite Audio Sender.
3.9
Reset / Clear all Pair/Bond settings
To clear all saved Audio Senders from the Favorites List, press the Bond button six times. The LED status indicator will flash red,
the Soul Shaker’s Favorites List will be cleared, and volume settings reset. You may now add new Audio Senders to the Favorites
List.
3.10 Firmware Update
The Soul Shaker’s USB port is used only for software updates. GoRave may from time to time provide consumers with a firmware
update for Soul Shaker. Instructions on how to perform the update will be provided by GoRave when necessary.
3.11 Compatibility with other GoRave audio products
Soul Shaker subwoofers are compatible with other GoRave Receivers and Audio Senders, and other SKAA-compatible audio
products. Check out the combinations on gorave.com.
4.Troubleshooting
Most issues in audio systems are a result of incorrect connections or improper control settings. If you encounter problems, isolate
the area of difficulty, check the control settings, determine the cause of the fault and make the necessary changes.
4.1
Power/Standby LED is not lit
No main power to Soul Shaker. Check AC power connections at the amplifier and the AC outlet.
4.2
No sound playing from Soul Shaker
Check the Pair/Bond LED indicator on the top panel. If the Pair/Bond LED is dim, it means that Soul Shaker is seeking a connection, with an Audio Sender. Check following conditions:
1)
2)
3)
4)
Is the source device (TV, computer, smartphone, tablet) turned on and connected to an Audio Sender?
Is audio playing on the source device?
Has the Soul Shaker been paired with the Audio Sender?
Is the volume on the source device or on the Soul Shaker muted or set too low?
7
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
Soul Shaker can play from only one connection at time. If a device is already bonded with Soul Shaker and you are trying to play
music from another source, unplug the Audio Sender from the first device to allow the second device to play.
If the LED is lit solid, it means Soul Shaker has successfully bonded with a device in Favorites List. Check all of your connections
and control settings on associated components.
5.Specifications
Power
100 watts
Woofer
8” downward-firing driver
Frequency Response
30 Hz - 250 Hz
Crossover Frequency
30 Hz - 180 Hz
Distortion
0.1% @ 1W, 100 Hz
Enclosure
Vented MDF enclosure, black finish
Phase Selection
0-180° selection switch
Wireless Input
GoRave Audio Senders and other SKAA-based wireless audio transmitters
Feet
30mm rubber feet
Power Supply
Universal input 85V-264V 47Hz-63Hz, auto-configuring
Power Cord
Detachable 8 foot, 2-conductor US type, black
WIRELESS RANGE
60 feet
120 feet
Dimensions (WxHxD)
15.9” (405mm) high x 14.3” (362mm) deep x 10.3” (261mm) wide
TV
oRave Audio
Senders
Weight
(net)can connect wirelessly with
26.9GoRave
lbs (12.2 kg) shipping weight
eceivers in the diameter shown for each type of transmitter:
GoTV and USB
Apple and Android
Wireless Range
USB
Audio Senders
Mobile Audio Senders
ELESS RANGE
Audio
Sender
nders can connect wirelessly with GoRave
Wireless Range
ameter shown for each type of transmitter:
Diameter
oRave
eceiver
GoRave
Receiver
120 feet
GoTV and USB
Audio Senders
60 feet
TV
USB
Apple and Android
Mobile Audio Senders
ANDROID
ANDROID
LIGHTNING
30-PIN
LIGHTNING
30-PIN
Wireless Range
Diameter
All specifications are accurate at the time of printing. Levven Electronics Ltd. reserves the right to make changes and improvements to GoRave without notice.
6.Warranty
1-YEAR LIMITED WARRANTY
Levven Electronics Ltd. (“Levven”) warrants that the GoRave Soul Shaker you have purchased shall be free of any defects in parts
and workmanship if used under normal operating conditions for a period of one (1) year from the date of purchase, except this
warranty shall apply only to the original purchaser.
8
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
PLEASE RETAIN YOUR SALES RECEIPT, AS IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY.
THIS WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.
Defective units will be repaired or replaced without charge, at Levven’s discretion, with a like or comparable product by the Dealer
if presented with proof of purchase to the Authorized GoRave Dealer from whom the GoRave Soul Way was purchased. Any repair
or service performed by any person or entity other than GoRave is not covered by this limited warranty. Transportation costs are
not included in this warranty. This limited warranty becomes void if the product has been damaged by alteration, misuse, accident,
or neglect; or the product has been repaired or serviced by persons not authorized by Levven. THE FOREGOING CONSTITUTES
THE ONLY WARRANTY MADE BY GORAVE WITH RESPECT TO THE PRODUCT AND IS MADE EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED. Any implied warranties, including without limitation, any implied warranties of merchantability or fitness for any particular purpose, imposed under state law are limited to the duration of this limited warranty. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitations may not be applicable to you.
This warranty is void if the GoRave Soul Shaker enclosure has been opened.
LEVVEN ASSUMES NO LIABILITY FOR PROPERTY DAMAGE RESULTING FROM NEITHER FAILURE OF THIS PRODUCT
NOR ANY LOSS OF INCOME, SATISFACTION OR DAMAGES ARISING FROM THE LOSS OF USE OF SAME DUE TO DEFECTS
OR AVAILABILITY OF SAME DURING SERVICE.
NOTE: This warranty applies only to products purchased and serviced within the U.S.A. and Canada. Warranties outside these
countries are as defined by the authorized GoRave Distributor for your country or region, and may vary from the above in terms
and/or length.
Thank you again. We hope you enjoy your GoRave Soul Shaker subwoofer. Visit gorave.com and share your GoRave story with us!
7. Certifications and Agency approvals
•
•
•
•
•
UL 60065-2003 - U.S.A. 120V Certification
CAN/CSA C22.2 No. 60065.03 – Canada 120V
Certification
IEC 60065:2001 - CB Scheme certification
FCC Part 15 Class B, IC ICES-003 Issue 4
EMC: EN55013:2001/A1:2003, AS/NZS CISPR
13:2004 (Radiated Interference Voltage and Power)
•
•
•
•
EN55020:2002/A2:2005 (Radiated Immunity)
EN61000-3-2:2000/A1:2001/A2:2005 and
EN61000-3-3:1995/A1:2001/A2:2005 (Current
Harmonics and Voltage Fluctuations)
EU power management to 2013 standards
RoHS
FCC ID: 2AA9N-GRSUB
Industry Canada ID: 11506A-GRSUB
All specifications are accurate at the time of printing. Levven reserves the right to make improvements without notice.
8. FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
9
V1.0 / 03-04-2017
GORAVE SOUL SHAKER SUBWOOFER
MORE THAN MUSIC
Owner’s Installation and Operation Manual
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
►► Reorient or relocate the receiving antenna.
►► Increase the separation between the equipment and receiver.
►► Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
►► Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
IC Statement:
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. This device and its antenna(s) must not be
co-located or operation in conjunction with any other antenna or transmitter.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS_102 radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising