DEWETRON Technical Reference Guide

DEWETRON Technical Reference Guide
All-In-One
DEWE2
DEWE-2600
High performance portable all-in-one instrument
Flexible mixture of isolated and differential analog inputs
Function panels for digital I/O, counters, sensor supply …
Choose from three models
Add your choice of signal conditioning,
A/D board(s) and software to complete these systems
DEWE-2600 series
Input specifications
DEWE-2600
DEWE-2601
DEWE-2602
16
-
16
Slots for DAQ or PAD modules
MDAQ input channels
-
Available panel space
2 x 2U
Up to 64 (DSUB connectors)
Up to 32
1 x 4U and 1x 4.5 U
2 x 2U
4 full / 3 half length
2 full / 2 half length
1)
Total PCI-slots
2 full / 2 half length
Hard disk
1 TB removable HDD
Data throughput
Typ. 80 MB/s
Power supply
2)
95 to 260 VAC
15” TFT display, 1280 x 800 pixel
Processor
Front-ends
Display
Intel® Core™ i5/i7
RAM
3 GB
Ethernet
2 x 1 Gbit LAN
USB interfaces
4
RS-232 interface
1
Storage drive
Internal DVD +/-RW burner
Microsoft® WINDOWS® 7
417 x 246 x 303 mm (16.4 x 9.7 x 11.9 in.)
Weight
Signal Conditioning
Dimensions (W x D x H)
Typ. 14 kg (31 lb.)
Environmental specifications
Operating temperature
0 to +50 °C, down to -20 °C with prewarmed unit
Storage temperature
-20 to +70 °C
Humidity
10 to 80 % non cond., 5 to 95 % rel. humidity
Vibration3)
EN 60068-2-6, EN 60721-3-2 class 2M2
Shock3)
EN 60068-2-27
Please find current specifications in the latest price list
2)
Depends on the system configuration. Examples:
• DEWE-2601 with 6x DEWE-ORION-1616-500 could stream 80 MB/s to the harddisk
• DEWE-2600 with 4 x DEWE-ORION-1624-200 + 2x DEWE-CAM01 could store 70 MB/s
3)
Tested with Solid State Disk
1)
Additional interfaces and sensors
Measurements are not limited to just classic analog and digital signals. Please find further detailed information to
expand your system in the chapter “Components”.
Needed to complete the system
Options to expand the system
DEWE-ORION “A/D Boards” offer simultaneous sampled
analog inputs, synchronous digital I/Os, high-performance
counters and high-speed CAN interfaces. DAQP- or MDAQ
signal amplifiers and software are needed as well.
Add further “Interface Cards” like ARINC-429, 1553, PCM
telemetry, FireWire and analog output or special “Sensors”
like synchronized Video, industrial encoders (RIE-360) or
GPS.
A/D card
DAQP/MDAQ
DEWESoft
ARINC
VIDEO
Components
Operating system
Software
Main system
Up to 80 (BNC connectors)
Instruments
Fully battery powered (optional)
Dedicated Instruments
Up to 7 PCI slots for A/D and other cards (1394, ARINC, 1553…)
VGPS
www.dewetron.com/dewe-2600
99
DEWE-2600
Configuration Guide DEWE-2600
Most flexible model, prepared for DAQP isolated analog input amplifier modules. DAQP conditioners offer highest
bandwidth, great accuracy, different input ranges and integrated filters. Besides the single channel modularity – a
module easily can be changed by the user at any time – the main advantage of these modules is the high galvanic
isolation which ensures safe measurements, high quality results and make them almost indestructible. See chapter
“Signal Conditioning” for details.
Function panels
Options
Standard panel for DEWE-2600-CA2
Analog input - DAQ modules
0.5U-CLAMP-DC-POWER-8
0.5 U
±15 V power supply and digital status
lines for PNA-CLAMP-150-DC
2U
0.5U-AMPFLEX-POWER-8
0.5 U
Combustion analyzer input
1.5U-TC-PANEL-32
2U
Power supply for PNA-A100
current clamps
0.5U-AOUT-BNC-2
0.5 U
1.5 U
1U-AOUT-BNC-4
1U
Thermocouple inputs via 4 MPAD-TH-8
1U-AOUT-BNC-8
1.5U-ORION-DIO-PANEL-1
1U
1.5 U
Analog output
Counter input with digital input
Configuration Guide DEWE-2601
High channel count version, for direct sensor input via differential MDAQ analog input amplifiers. MDAQ modules are
available in cost efficient and space saving 8-channel blocks. See chapter “Signal Conditioning” for details.
MDAQ panels
Options
1.5U-ORION-DIO-PANEL-1
1.5 U
1.5 U
Counter input with digital input
4U
4.5 U
0.5U-CLAMP-DC-POWER-8
0.5 U
2U
0.5 U
±15 V power supply and digital status
lines for PNA-CLAMP-150-DC
0.5U-AMPFLEX-POWER-8
Limited use
(no 1.5 U MDAQ panel
in this area)
0.5 U
Power supply for PNA-A100
current clamps
2U
0.5U-AOUT-BNC-2
0.5 U
1U-AOUT-BNC-4
Analog input - MDAQ modules
1U
1.5U-TC-PANEL-32
1U-AOUT-BNC-8
1.5 U
1U
Thermocouple inputs via 4 MPAD-TH-8
100
Analog output
www.de we t ron .com
All-In-One
MDAQ panels
Options
1.5U-ORION-DIO-PANEL-1
Analog input - DAQ modules
1.5 U
1.5 U
Counter input with digital input
0.5U-CLAMP-DC-POWER-8
0.5 U
2U
2U
±15 V power supply and digital status
lines for PNA-CLAMP-150-DC
0.5U-AMPFLEX-POWER-8
Dedicated Instruments
This version combines slots for isolated DAQP modules and positions for differential MDAQ blocks. Thus it enables
you configuring a cost optimized system that needs isolated inputs, e.g. high voltage signals, and a number of differential inputs, e.g. accelerometers.
DEWE2
Configuration Guide DEWE-2602
2U
0.5U-AOUT-BNC-2
0.5 U
1U-AOUT-BNC-4
Analog input - MDAQ modules
1U-AOUT-BNC-8
1.5 U
1U
Analog output
16 isolated DAQP modules
4 MPAD modules
(16 tc “T” and 16 tc “J” inputs)
8 counters + 16 extra digital input
DEWE-2602
16 isolated DAQP modules
16 differential analog MDAQ inputs
8 counters + 16 extra digital inputs
DEWE-2601
80 differential analog MDAQ inputs
Software
Typical Configurations
Components
Signal Conditioning
Thermocouple inputs via 4 MPAD-TH-8
Front-ends
1U
1.5U-TC-PANEL-32
DEWE-2600
Instruments
0.5 U
Power supply for PNA-A100
current clamps
101
DEWE-2600
System options and upgrades for DEWE-2600 series
Options
Description
DISP-15-TOUCH
Touchscreen for 15“ display
2600-FIREWIRE
PCI Express FireWire® interface for the DEWE-2600
2600-PS-BAT
Battery power supply with UPS function,
18 .. 24 VDC non-isolated input, incl. external AC power supply DEWE-POW-24-350,
3 slots for hot-swappable batteries, 3 batteries for appr. 3 hours operation included,
for DC operation always add DEWE-DCDC-24-300-ISO
DEWE-DCDC-24-300-ISO
External DC/DC converter with isolation,
9 to 36 VDC input range, Lemo EGJ.3B.302, incl. 2 m cable to banana jacks,
24 VDC output, 300 W, Lemo EGG.2B.302 socket
BAT-95-WH
Lithium-Ion battery, 14.4 V, 95Wh, max. 8A
BAT-CHARGER-1
Desktop battery charger for 1 battery, incl. external AC adaptor
BAT-CHARGER-4
Desktop battery charger for 4 batteries, incl. external AC adaptor
PS-BAT-REMOTE-ON
Special add-on for the battery power supply, one extra connection with a wake-up signal is needed to the
power supply input of the unit,
allows to automatically turn on the instrument when the ignition of the car is turned on, also turns off the
instrument when the car is turned off
Upgrades
Description
HDD-1000-SSD-128
Upgrade to 128 GB flash disk (replaces 1 TB hard disk),
max. data throughput 40 MB/s
HDD-REM-1000
Spare removable hard disk, 1 TB
2600-SYSTEM-SSD-64
Additional internal SSD 64 GB for Windows and DEWESoft, the removable hard disk remains
2600-PS-BAT
Optional battery power supply
This option turns your DEWE-2600 into a fully battery powered instrument. The hotswappable batteries guarantee continuous operation without an external power
source. The instrument provides 3 slots for BAT-95WH batteries and can be operated for up to ~2 hours with 3 batteries installed. Since this time depends a lot on
the system configuration a DEWESoft plugin shows the battery status directly in the
software. Also alarm conditions can be set and the battery parameters can be displayed as additional measurement channels. Operating temperature is limited to
0 .. 45° C when batteries are charged.
2600-SYSTEM-SSD-64
HDD-REM-600
2600-CSMK1
Additional internal Solid State Disk Spare removable harddisk, 600 GB Car seat mounting kit
for classified work
DEWE-DCDC-24-300-ISO
Isolated DC power supply, needed
to operate units with 2600-PS-BAT
option from DC
Channel Expansion
Signal conditioning for slow signals is added by connecting EPAD2 series modules to the systems EPAD interface.
For expanding the number of dynamic channels there are three choices:
Analog cable: Additional A/D
boards are installed into the basic
instrument and external signal conditioning, e.g. DAQ modules in a
DEWE-30 chassis, is connected by
means of an analog signal cable.
102
PCI expansion: A PCI-HOST card
is installed into the basic instrument and external signal conditioning, e.g. DAQ modules in a
DEWE-50 chassis, is connected by
means of a PCI cable.
DEWE-NET: Several instruments are connected via Ethernet. Each unit requires
an ORION-SYNC option. For short distances a sync cable is used if the units
are far from each other a sync interface
like DEWE-CLOCK is used.
www.de we t ron .com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising