I0ACNP01 Hermetic connector for power cable EN V1 0

I0ACNP01 Hermetic connector for power cable EN V1 0
Item:
Hermetic connector for power cable
Compatibility: CFIP Lumina
P/N: I0ACNP01
Description
The I0ACNP01 is a standard size circular 2 pin female connector for CFIP Lumina outdoor power cable.
Material Specifications
Connector type
Pin configuration
Body materials
Pin materials
Connecting style
Connector gender
Contact gender
Waterproof rating
Temperature range
Environmental spec
Durability
Field installable (solder pins)
2 pins
Nylon + GF, UL recognized
Copper Alloy, 6µ Gold plated
Screw
Female
Female
IP67
-40º C to +105º C
48 Hours Salt spray contact
3000 Plug/Unplug cycles minimum
Technical Specifications
Contact resistance
Insulation resistance
Current rating
Breakdown voltage
Recommended wire gauge
Recommended outer
diameter of power cable
≤ 10mΩ
≥ 100MΩ at DC 500V
5A
≥ AC 500V/1 min
18 – 24 AWG
6 mm
Size Specifications
1
© SAF Tehnika JSC, February 2011
Hermetic connector for power cable, v1.0
Assembly instructions
1
2
3
4
5
6
7
1.
2.
3.
4.
5.
6.
7.
You will need: DC connector components (1-6) and ready 2-wire DC power cable (7).
Wider sealing rubber ring (4) should be fitted inside from the front end of (6).
Narrower sealing rubber ring (3) should be fitted inside from the rear end of (6).
Parts of the DC connector should be put on the cable in the sequence as shown.
DC power cable should be soldered in any layout.
Afterwards, part (6) should be tightened on to part (5).
Assembled DC power connector after tightening the last part (1).
2
© SAF Tehnika JSC, February 2011
Hermetic connector for power cable, v1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising