How to graph individual values (ex. concurrent connections to the server) Orig in ally Pu b lish ed on [article("d ate_p u b lish ed ")] | Up d ated on 03/09 /2017 8:03 am PST Any integer read-only value in the MBeans section of JConsole can be graphed by double-clicking its value. The graph updates every f ive seconds and is maintained even if you view a dif f erent panel of attributes. To stop graphing a value, click Discard chart. To graph the current number connections to the Wowza Media Server, f ollow these steps: 1. 2. 3. 4. Connect to the Wowza media server using JConsole. Click the MBeans tab. Navigate to: WowzaMediaServerPro/Connections/Attributes Double-click the current value. Note: If you're running Wowza Streaming Engine™ software, the server items are exposed in the WowzaStreamingEngine section under the MBeans tab. You should use the following procedure: 1. Connect to Wowza Steaming Engine using JConsole. 2. Click the MBeans tab. 3. Navigate to: WowzaStreamingEngine/Connections/Attributes 4. Double click the current value. Again, this can be done f or any read-only value. Originally Published: 10-03-2010. If you're having problems or want to discuss this article, post in our f orum.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project