HPE StoreEver 1/8 G2 Tape Autoloader - PC
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Overview
HPE StoreEver 1/8 G2 Tape Autoloader
The HPE StoreEver 1/8 G2 Tape Autoloader provides a cost-effective and easy-to-manage tape solution. The HPE 1/8 G2
autoloader combines incredible storage density and features into a compact 1U form factor. Capable of up to 120TB of
compressed capacity in only a 1U form factor, the autoloader is well equipped to offer room for data growth. Web-based remote
management offers the capability to quickly and easily access, configure, monitor, and troubleshoot the autoloader that will
reduce dependencies on local IT staff while allowing multiple sites to be supported centrally. Protect confidential information
with native encryption, ensuring that if a tape is lost or stolen your data is protected from unauthorized access. Proactively
monitor utilization, operational performance, as well as health information for both the drive and media with TapeAssure.
What's New
LTO-7 Ultrium 15000FC and SAS tape drives and tape media are now available.
Key Features
•
•
•
•
•
•
•
Family Comparison
LTO-7 Ultrium 15000 tape technology delivers 120TB of compressed capacity (2.5:1) in a
1U form factor.
Easy to install, manage and use integrated solution
Protect and secure your data with native autoloader encryption
Predicative and proactive monitoring with Tape Assure
Integrated web-based remote management
Flexible tape technology and interface choices to suit your needs
Easily serviceable and replaceable components
1/8 G2 LTO-7 Ultrium 1/8 G2 LTO-6 Ultrium
6250 Tape Autoloader
15000 Tape
Autoloader
Drive Technology
Ultrium 15000
Ultrium 6250
Capacity
(compressed 2.5:1)
120 TB
50 TB
Capacity
(compressed 2:1)
Data Transfer
(max native)
Interface
1/8 G2 LTO-5 Ultrium
3000 Tape Autoloader
1/8 G2 LTO-4 Ultrium
1760 Tape Autoloader
Ultrium 3000
Ultrium 1760
24 TB
12.8 TB
300 MB/s
160 MB/s
140 MB/s
80 MB/s
8 Gb/sec FC
6 Gb/sec SAS
8 Gb/sec FC
6 Gb/sec SAS
8 Gb/sec FC
6 Gb/sec SAS
3 Gb/sec SAS
(LTO 5, 4, 3)
Page 1
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Product Highlights
Easy Installation
The 1/8 G2 Tape Autoloader ships as a rack-ready unit. A separate 1/8 G2 Tape Autoloader Rack Kit
must be purchased to allow installation in a variety of HPE racks which include the 10000 series, 9000
series, 5000 series and System/E racks.
A set of rubber feet are included in the box if you choose to use the unit on a tabletop or desk. For
additional structural rigidity, Hewlett Packard Enterprise recommends the purchase of the 1/8 G2 Rackto-Tabletop conversion kit which has a maximum load of 33 pounds (15 kilograms) and fully encloses
the unit.
Data Protector backup
and recovery software
If the Autoloader is for a large environment that requires UNIX support and/or enterprise class
application and feature support then HPE Data Protector is the recommended backup and recovery
software. If current or future requirements will require Data Protector, this software should be installed
from day 1.
For more information and evaluation software please visit:
http://www.hpe.com/storage/dataprotector.
HPE StoreOpen
Automation
HPE StoreOpen Automation is a free downloadable application that extends the LTFS capability to
HPE Autoloaders, HPE MSL and ESL G3 Tape Libraries. By simply mounting the tape autoloader or
library as a file system, the intuitive HPE StoreOpen Automation interface makes it easier to copy,
rename, create or move files. When a cartridge folder is selected for use, that tape is automatically
moved to an available tape drive.
For more information, including user guide, downloads and compatibility, visit:
http://www.hpe.com/storage/HPStoreOpen
Manageability
The 1/8 G2 Tape Autoloader allows web-based remote manageability; the unit can be monitored and
managed from across the room or across the globe. Functions included in the management tool
include:
•
•
•
•
•
•
•
•
•
Proven Reliability
Status information on the drive and system
System configuration operations and reporting
System error and status logs
Library and drive firmware upload capabilities
Diagnostic tests and information
Cartridge movement for maintenance and management purposes
Cleaning cartridge support
Security and access control
SNMP support for IP communications
With a rating of 2,000,000 robot load/unload cycles, the 1/8 G2 Tape Autoloader provides necessary
high reliability for today's demanding environment. To improve reliability and longevity, all HPE Ultrium
products feature Data Rate Matching (DRM). This allows the tape drive to dynamically adjust the
speed of the drive down to one-third the native transfer rate of the tape drive to match the speed of
the host.. This increases performance, reduces mechanical wear on the tape drive, and extends tape
life.
Page 2
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Product Highlights
Longevity
Organizations need to be confident that their data in archive is still there when they need it. LTO tape
media is specified with a 30 year shelf life in normal ambient conditions.
Disaster Recovery and
Security
Removable media also has the advantage that data is held 'offline' which means that archive data on
tape has the additional level of protection from the threats to on-line data from viruses, hackers and
cyber-attacks. All Ultrium tape drives (since generation 4) include hardware based data encryption to
prevent unauthorized access to data at rest and cartridges are available with write-once-read-many
(WORM) capability to prevent accidental overwriting of data archived on the tape. Both WORM and
hardware data encryption features help organizations to comply with increased data security
regulations.
Encryption
The HPE 1/8 G2 Tape Autoloader offers multiple options for data encryption, depending on the
requirements for policy, regulation, compliance, and centralized key management.
Protect the confidentiality and integrity of your data:
The HPE 1/8 G2 & MSL Encryption Kit provides a library-enabled encryption solution that greatly
enhances data privacy, confidentiality, and integrity of your critical business data while supporting
compliance requirements. While there are a wide range of encryption solutions available, the HPE 1/8
G2 & MSL Encryption Kit is intended to be an easy and affordable library-enabled solution for small
businesses.
The encryption kit includes two USB key server tokens, product documentation, and firmware support.
One encryption kit is needed per library or autoloader and it must be physically accessible so that the
USB token can be inserted into the automation device. One of the two tokens will plug into the USB
port in the autoloader or library and will generate and maintain encryption keys for the LTO-7, LTO-6,
LTO-5 and LTO-4 drives/libraries. The USB key server token uses a hardware random number
generator, password authentication, and digital envelopes for strong encryption keys and security
operations. The encryption kit provides a self-contained solution for autoloaders and MSL libraries with
no additional software, PCs, or servers required or involved.
Protect critical data across an enterprise:
To meet requirements for larger scale encryption key managers, the HPE 1/8 G2 Tape Autoloader
supports KMIP 1.2 compliant key managers. With the purchase of the KMIP Encryption License, the 1/8
G2 Tape Autoloader and MSL libraries will be able to request encryption keys from KMIP 1.2 compliant
key managers, for data encryption and key management.
For more information on all supported key management servers, please visit:
http://www.hpe.com/storage/BURAcompatibility
LTO Ultrium Technology HPE LTO (Linear Tape Open) Ultrium Tape Drives use best of breed technology. By taking the best
features from other tape technologies and combining them into a single new technology, Ultrium tape
drives are in a league of their own. The LTO Ultrium specification is an industry standard format; thus
data written on HPE Ultrium Tape Drives can be interchanged directly with Ultrium Tape Drives from
other vendors.
Investment protection
HPE LTO tape drives and automation products are founded on the LTO open standard and adhere to
the published LTO format roadmap to Generation 10. The ability to read back two generation and
read/write back one generation of media, assures LTO customers’ investment protection.
Data Rate Matching
Data Rate Matching combines sophisticated buffer management with variable tape drivemotor speeds
Page 3
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Product Highlights
to match the tape drive transfer rate to the host output. . This feature ensures that the tape drive
continues to stream data regardless of the environment, and brings three big advantages:
•
•
•
HPE Ultrium WORM
It optimizes performance and maximizes overall efficiency, allowing the drive to respond
immediately to any data speed changes from the host.
It minimizes rewinding and repositioning of the tape, significantly reducing physical wear and
increasing reliability.
It minimizes the power requirements for the drive by reducing the number of repositions
needed.
LTO Ultrium Tape Drive
ATS data transfer rate range (native)
HPE LTO-7 Ultrium 15000
HPE LTO-6 Ultrium 6250
HPE LTO-5 Ultrium 3000
HPE LTO-4 Ultrium 1760
101 to 300 MB/s
54 to 160 MB/s
47 to 140 MB/s
33 to 80 MB/s
Critical to the success of data retention policies in highly regulated environments is the ability to store
and manage data in an unalterable state. Following stringent guidelines set forth by regulatory agencies
such as the SEC and HIPPA, IT organizations must now integrate new solutions and policies that can
verify the integrity of stored data for periods that can extend well beyond seven years.
Every generation of LTO Ultrium since LTO-3 tape drives feature the ability to archive and store data in
a read-only, non-rewriteable format that meets the most stringent regulatory guidelines. Using a
combination of integrated fail-safe features in the drive firmware, cartridge memory, and tape
formatting, LTO Ultrium provides the ability to archive large amounts of data for periods of up to 30
years in a secure, untampered state. Ultrium tape drives include support for both rewritable and WORM
media providing for a secure, long-term archiving solution into any data protection strategy. LTO
Ultrium WORM provides the following advantages:
•
•
•
•
•
A single drive to support all backup and archiving needs
Two distinctive tape cartridges to easily distinguish and manage both rewriteable and WORM
data cartridges
A specially designed WORM data cartridge with multiple integrated fail-safe features to
prevent accidental or intentional overwriting of data
Support from many backup and archiving software vendors, providing the most comprehensive
and mainstream support in the industry
The LTO open standard that offers greater choice and compatibility across all third- and
fourth-generation LTO Ultrium products
NOTE: While all HPE LTO-7, LTO-6, LTO-5, and LTO-4 Ultrium tape drives support LTO Ultrium
WORM media, some third, fourth and fifth-generation LTO Ultrium tape drives from other
manufacturers may not include read and write support for LTO Ultrium WORM media. For nonHPE third- and fourth-generation LTO Ultrium tape drives, please check the manufacturers'
specifications to ensure this support is provided if you are using your WORM media. If WORM
support is not provided, the drive will eject the WORM tape cartridge immediately upon insertion
into to the tape drive.
HPE Library and Tape
Tools
The 1/8 G2 Tape Autoloader is supported on The Hewlett Packard Enterprise industry-leading
diagnostic tool - HPE Library and Tape Tools (L&TT). L&TT is a single, convenient program that's a
snap to install and simple to operate. L&TT's intuitive user interface eliminates the need for training
Page 4
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Product Highlights
and deploys in less than five minutes. This robust diagnostic tool is designed for both the experienced
professional and the untrained administrator. It ensures product integrity through self-diagnostics and
fast resolution to device concerns. Additional information on L&TT plus download information can be
found at: http://www.hpe.com/support/tapetools.
HPE Storage Media
Hewlett Packard Enterprise recommends that you use Hewlett Packard Enterprise cartridges in the 1/8
G2 Tape Autoloader to assure the highest level of protection for your valuable data. The test program
for HPE media is the most thorough and comprehensive in the industry.
All HPE cartridges must satisfy an exhaustive battery of additional tests that relate directly to real life
situations, where real data and real businesses are at stake. The benefit of the Hewlett Packard
Enterprise brand specification for media is consistent quality. Through the testing of thousands of HPE
drives and HPE cartridges, the ideal formulation for backup performance is defined and then
continuously monitored. This hugely resource-intensive process is unique to Hewlett Packard
Enterprise and affords deep insight into the HPE backup solution for a wide range of environments
and duty cycles. Your best choice for ease of support and maximum dependability is to use HPEbranded Ultrium cartridges at all times.
Factory Express
Portfolio for Servers
and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for HPE
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed. Customization must comply with all relevant product specifications
and factory supported configurations.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. Type of service support varies by platform and product family. For
more information on Factory Express services for your specific server model or storage device please
contact your sales representative or go to: http://www.hpe.com/info/factoryexpress.
Page 5
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Compatibility
Compatibility
The Hewlett Packard Enterprise extensive compatibility testing program assures that your HPE 1/8 G2
Tape Autoloader works with leading servers, operating systems, and backup applications - and not just
those sold by HP. The 1/8 G2 Tape Autoloader works seamlessly in many environments, making them
especially suitable if you have a mixed system environment. For the latest list of servers, workstations,
operating systems, and backup software that support the 1/8 G2 Tape Autoloader, reference the HPE
Data Agile BURA Compatibility Matrix (Formerly EBS) at:
http://www.hpe.com/storage/BURAcompatibility .
NOTE: The 1/8 G2 Tape Autoloader requires an HBA with multiple LUN support and should not be
used with RAID or Array controllers
Server Compatibility
The 1/8 G2 Tape Autoloader is supported on a wide range of HPE systems. For details of which 1/8 G2
Tape Autoloader works with which systems, including third-party systems, reference the HPE Data
Agile BURA Compatibility Matrix (Formerly EBS) at:
http://www.hpe.com/storage/BURAcompatibility for the latest hardware compatibility
information.
OS Support
Reference the HPE Data Agile BURA Compatibility Matrix (Formerly EBS) for the most up-to-date OS
compatibility information at: http://www.hpe.com/storage/BURAcompatibility.
Software Support
Reference the HPE Data Agile BURA Compatibility Matrix (Formerly EBS) for the most up-to-date
software compatibility information at: http://www.hpe.com/storage/BURAcompatibility.
Page 6
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Service and Support, HPE Care Pack, and Warranty Information
Warranty
The warranty for this product consists of 1-year parts exchange, next business day.
For increased uptime, productivity and ROI, HPE Care Pack packaged services for Storage
These days, you need to get the most out of your storage investment-you can't afford not to. When you buy HPE storage products
and solutions, it's also a good time to think about what levels of service and support you may need. To help take the worry out of
deploying, designing, maintaining, and managing your environment, we've designed a portfolio of service options that are as:
flexible, reliable and scalable as your storage. Unlike storage-only vendors, we take a holistic approach to your entire environment,
bridging storage, servers, blades, software and network infrastructures with our HPE Care Pack packaged services for Storage.
Protect your business beyond the warranty
When it comes to robustness and reliability, standard warranties on today's computing equipment have matured just as the
technologies have matured. Good news on some fronts-but also a source of potential problems and subsequent consequences
that come from depending on standard warranties alone. Standard warranty protects against product defects and some causes of
downtime- but not the business. By using a standard approach to warranty uplifts, such as HPE Care Pack Services, you can
reduce downtime risks and be more certain of operational consistency for both mission-critical and standard business computing.
Simply put, HPE Care Pack Services normalize the warranty of combined products - helping you proactively guard against
unplanned downtime.
Extending warranties with HPE Care Pack Services
For cost-effective upgrading or extending your standard warranty, HPE Care Pack Services offer a suite of standard reactive
hardware and software support services that are sold separately, or combined as with our Support Plus and Support Plus 24
services. The portfolio also provides a combination of proactive and reactive services, such as Proactive 24 Service and Critical
Service. In addition, with HPE Proactive Select we offer an innovative approach to service delivery that gives you the flexibility to
acquire the specific proactive services you need today, then add services as your needs evolve. HPE Proactive Select offers a broad
set of technical or per-event type service options - including server, storage, and network, SAN device, and software, environment,
installation and education services. Services that you can mix and match depending on your specific requirements, from
preliminary planning and equipment delivery to installation, configuration, integration, and testing, through every level of ongoing
support. Our HPE Care Pack packaged services for Storage assures help when you need it most. And for many products, postwarranty HPE Care Pack Services are available when your original warranty has expired.
HPE Storage Services: Offering reliability, flexibility and value-just like your storage
HPE Storage Services offers a full spectrum of customer care, from technology support to complex migrations to complete
completely managed services. HPE Factory Express provides customization, integration and deployment services for turnkey
solutions. HPE Education offers flexible, comprehensive training on storage networking, disk storage systems, and storage software
to help your IT staff get the most out of your investments. And HPE Financial solutions extend innovative financing and asset
management programs to cost-effective buy, manage and eventually retire your older equipment.
HPE Storage Services, the trusted business technology experts who manage your technology in action, because when technology
works, business works. http://www.hpe.com/services/storage
NOTE: Care Pack Services availability may vary by product and country.
HPE Care Pack Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
• Services for customers purchasing from Hewlett Packard Enterprise or an enterprise reseller are quoted using Hewlett
Packard Enterprise order configuration tools.
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product.
Page 7
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Service and Support, HPE Care Pack, and Warranty Information
Recommended Services HPE Foundation Care 24x7 connects you to HPE 24 hours a day, seven days a week for assistance on
resolving issues - hardware onsite response within four hours and software call back within two hours
after opening your case. Three years' coverage recommended with HPE Care Pack Service.
HPE Install Storage Autoloader/Tape Drive Array Service
For smooth startup and better business outcomes, HPE Install Storage Autoloader/Tape Drive Array
Service- this service provides initial hardware installation into your server technology environment
(system configuration is not included). Leverage the full strength of HPE Technology Services customers can trust the services professionals at Hewlett Packard Enterprise to work collaboratively
with them, putting our strategic and technical know-how to work across their entire infrastructure.
•
•
Allows your IT resources to stay focused on their core tasks and priorities
Reduces implementation time, impact and risk to your storage environment
http://h71028.www7.hpe.com/ERC/downloads/5981-9356EN.pdf
HPE Proactive Select Service
Hewlett Packard Enterprise Proactive Select Service improves your IT performance and manageability
through the use of cost effective flexible services. Hewlett Packard Enterprise provides technical
expertise and best practices to accelerate ROI of your technology investment. Selectable proactive
services span a wide range of technology and process services - a flexible way to purchase proactive
services that fit your particular environment and situation.
Hewlett Packard Enterprise Proactive Select Service is technology agnostic and purchased in addition
to your choice of underlying reactive support.
•
•
•
•
•
Access to a list of flexible and customizable proactive service activities
Enhance customers' in-house IT team with complementary assistance from Hewlett Packard
Enterprise
Improved time to solution
Reduce business risk and project costs by accessing HPE specialists
Simplify IT operational procedures by leveraging HPE best practices
http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
eSupport
HPE eSupport is a portfolio of technology-based services that assist you with managing your business
environment - from the desktop to the data center.
Support Portal
The Hewlett Packard Enterprise support portal provides one-stop access to the information, tools and
services you need to manage the daily operations of your IT environment.
Features include:
•
•
•
•
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Page 8
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Service and Support, HPE Care Pack, and Warranty Information
•
•
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires a Hewlett Packard Enterprise service
agreement. To access the support portal, visit http://www.hpe.com/support
Customer Technical
Training
Consider education as an integral part of your strategy to get the best return on investment for your
HPE storage solution. Hewlett Packard Enterprise offers a variety of training courses on storage
software, networking, archiving and disk storage systems. Our classes are available in many delivery
modalities from traditional instructor-led courses at one of our 80 training centers worldwide to on-site
training customized to your needs or online. http://www.hpe.com/learn/storage
HPE Services Awards
HPE Services continues to be recognized for service and support excellence by customers, partners,
industry organizations and publications around the world. Recent honors and award reflect our services
team's dedications, technical expertise, professionalism and uncompromising commitment to customer
satisfaction. For a list of all our awards, please visit
http://h20219.www2.hpe.com/services/cache/433028-0-0-225-121.htm
Additional Services
Information
For more information about HPE Care Pack Services for Storage, please visit:
http://www.hpe.com/services/storage
If you have specific questions, contact your local Hewlett Packard Enterprise representative. Contact
information for a representative in your area can be found at "Contact HPE" http://www.hpe.com
Page 9
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Configuration Information
Step 1 – Base Configuration
Select one:
Model Name
Model Description
HPE StoreEver 1/8 G2 LTO-7 Ultrium 15000 SAS Tape Autoloader
HPE StoreEver 1/8 G2 LTO-7 Ultrium 15000 FC Tape Autoloader
HPE StoreEver 1/8 G2 LTO-6 Ultrium 6250 SAS Tape Autoloader
HPE StoreEver 1/8 G2 LTO-6 Ultrium 6250 Fibre Channel Tape Autoloader
HPE StoreEver 1/8 G2 LTO-5 Ultrium 3000 Fibre Channel Tape Autoloader
HPE StoreEver 1/8 G2 LTO-5 Ultrium 3000 SAS Tape Autoloader
HPE StoreEver 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
Part Number
N7P35A
N7P34A
C0H18A
C0H19A
BL541B
BL536B
AK377B
Kit Contents (for each autoloader):
•
•
SAS models:
(1) 2.5M PDU Power Cord, C13/C14, 10A
(1) HPE SAS MiniHD-Mini 1x-2m Cable Assembly Kit
(1) RJ-45 Ethernet cable
Set of six rubber feet (for tabletop use)
Getting Started Poster
Flyer for Yosemite Server Backup software
FC models:
(1) 2.5M PDU Power Cord, C13/C14, 10A
(1) RJ-45 Ethernet cable
Set of six rubber feet (for tabletop use)
Getting Started Poster
Flyer for Yosemite Server Backup software
Step 2 - Additional Options
NOTE: The HPE StoreEver 1/8 G2 Tape Autoloader comes standard as a one drive, 8-slot unit (includes both a right and left
4-slot magazine) which is shipped rack-ready. A separate 1/8 G2 Tape Autoloader Rack Kit must be purchased to complete
the rack installation. The HPE 1/8 G2 Tape Autoloader ships with a PDU power cord (C13/C14, 10A, P/N 142257-002). If a
110V receptacle power cord is needed please order (P/N AF556A). For power cord options, please visit: HPE
http://www.hpe.com/products/powercords
Select each required option with quantities specified:
Power Cord
Quantity
Description
Part Number
1 each
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
NOTE: This cord does not ship standard with 1/8 G2 Tape
Autoloader.
1 each
HP C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
142257-002
NOTE: This cord ships standard with each 1/8 G2 Tape
Autoloader; can be used to connect the rack-mounted device
to PDUs with IEC-320 receptacles.
1 each
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
AF568A
Page 10
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Configuration Information
1 each
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
AF570A
1 each
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
1 each
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
1 each
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
AF571A
1 each
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
AF567A
1 each
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
1 each
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
1 each
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
AF572A
1 each
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
1 each
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
1 each
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
1 each
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
1 each
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF564A
1 each
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
NOTE: One power cord is required; please select the correct power cord for your geographical
location.
WARNING: This product can ONLY be used with a Hewlett Packard Enterprise approved power
cord for your specific geographic region. Use of a non-HPE approved power cord may result in: 1)
not meeting individual country specific safety requirements; 2) insufficient conductor capacity
that could result in overheating with potential personal injury and/or property damage; and 3) an
unapproved power cord could fracture resulting in the internal contacts being exposed, which
potentially could subject the user to a shock hazard. Hewlett Packard Enterprise disclaims all
liability in the event a non- Hewlett Packard Enterprise approved power cord is used.
Page 11
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
Factory Racking
Factory integrate the 1/8 G2 Tape Autoloader with other Hewlett Packard Enterprise
products such as Hewlett Packard Enterprise ProLiant Servers.
NOTE: #0D1 will appear after the 1/8 G2 Tape Autoloader part number on the
sales order if Hewlett Packard Enterprise factory integration is indicated.
#0D1
HP Integrity rx1600 Rack Support Shelf Kit
NOTE: Required to safely ship the 1/8 G2 Tape Autoloader via the factory
integration option (#0D1); shelf can be removed after the rack is received at the
customer site.
AB469A
Rack Kit
HPE StoreEver 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the unit in a standard 19-inch rack; includes rails and
rackmount instructions.
AH166A
Rack-to-Tabletop
Conversion Kit
HPE StoreEver 1/8 G2 Rack to Table Top Conversion Kit
NOTE: For use in converting the rack-ready 1/8 G2 Tape Autoloader into a
structurally rigid and fully enclosed tabletop model; maximum load up to 33
pounds (15 kilograms).
AH199A
Magazine Kit
HPE StoreEver 1/8 G2 Right Magazine Kit
NOTE: For use only on the right side of the 1/8 G2 Tape Autoloader; additional
4-slot magazine.
HPE StoreEver 1/8 G2 Tape Autoloader Left Magazine Kit
NOTE: For use only on the left side of the 1/8 G2 Tape Autoloader; additional 4slot magazine which includes an import/export slot.
AH167A
Encryption
HPE StoreEver 1/8 G2 Tape Autoloader and MSL Tape Library LTO-4 Encryption Kit
AH862A
AM495A
NOTE: Supports LTO-7, LTO-6, LTO-5, andLTO-4 Ultrium Tape Drives in the 1/8
G2 Autoloader, MSL2024, MSL4048, MSL8048, MSL8096, and MSL6480 Tape
Libraries.
HPE StoreEver MSL2024/4048/8096 KMIP Encryption LTU
NOTE: For use with 1/8 G2 Tape Autoloader and the MSL2024/4048/8048/8096
Tape libraries using LTO-7, LTO-6, LTO-5 or LTO-4 tape drives. The license will
enable secure connectivity with supported KMIP 1.2 compliant key management
servers.
See the HPE Data Agile BURA Compatibility Matrix (Formerly EBS) for the list of
supported servers. (hpe.com/storage/BURAcompatibility).
NOTE: This license will be delivered via hard copy in the mail.
NOTE: MSL libraries now have the ability to connect to KMIP complaint
Encryption Key managers in FIPS 140-2 secure mode with HH FC LTO-7 tape
drives, which are FIPS 140-2 certified.
TC468A
HPE StoreEver MSL2024/4048/8096 KMIP Encryption E-LTU
NOTE: For use with 1/8 G2 Tape Autoloader and the MSL2024/4048/8048/8096
Tape libraries using LTO-7, LTO-6, LTO-5 or LTO-4 tape drives. The license will
TC468AAE
Page 12
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
enable secure connectivity with supported KMIP 1.2 compliant key management
servers. See the HPE Data Agile BURA Compatibility Matrix (Formerly EBS) for the
list of supported servers. (hpe.com/storage/BURAcompatibility)
NOTE: This license will be delivered electronically.
NOTE: MSL libraries now have the ability to connect to KMIP complaint
Encryption Key managers in FIPS 140-2 secure mode with HH FC LTO-7 tape
drives, which are FIPS 140-2 certified.
Rack Cabinets
The 1/8 G2 Tape Autoloader is supported in a variety of HPE Rack offerings from 22U to 42U high
racks, including the HPE Intelligent Series Racks and the HPE 10000 G2 Series Racks. For more
information on the HPE rack offerings, please see the following URL:
http://www.hpe.com/info/rackandpower
NOTE: The 1/8 G2 Tape Autoloader is certified to ship in HPE racks that include a shock pallet. It
is mandatory to use a shock pallet in order to ship racks with equipment installed.
FC Host Bus Adapters
The 1/8 G2 Tape Autoloader is certified with a number of HPE Fibre Channel Host Bus Adapters. For
the most current list of supported FC HBAs, please see the HPE Data Agile BURA Compatibility Matrix
(Formerly EBS) and Design Guide located at: hpe.com/storeage/BURAcompatibility.
SAS Host Bus Adapters The 1/8 G2 Tape Autoloader is certified with a number of HPE SAS Host Bus
Adapters. For the most current list of supported SAS HBAs, please see the HPE Data
Agile BURA Compatibility Matrix (Formerly EBS) document and Design Guide
located at: hpe.com/storage/BURAcompatibility.
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m Cable
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m Cable
HP 2.0m External Mini SAS High Density to Mini SAS Cable
K2R09A
K2R10A
716191-B21
NOTE: One cable is required for every tape drive. Use this cable to connect HPE
1/8 G2 Tape Autoloader and HPE MSL SAS Tape Libraries to the HPE H241 Smart
Host Bus Adapter.
HP 4.0m External Mini SAS High Density to Mini SAS Cable
716193-B21
NOTE: One cable is required for every tape drive. Use this cable to connect HPE
1/8 G2 Tape Autoloader and HPE MSL SAS Tape Libraries to the HPE H241 Smart
Host Bus Adapter
HPE StoreEver External SAS to Mini-SAS Fanout Cable
NOTE: One cable is required for every four autoloaders or every four library
drives. Use this cable to connect HPE 1/8 G2 Tape Autoloader and MSL SAS Tape
Libraries to HPE SAS controllers with Infiniband (SFF8470) connectors.
HPE StoreEver 2m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four autoloaders or every four library
drives. Use this cable to connect HPE 1/8 G2 Tape Autoloader and MSL SAS Tape
Libraries to Mini-SAS (SFF8088) ports.
AH587A
HPE StoreEver 4m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four autoloaders or every four library
drives. Use this cable to connect HPE 1/8 G2 Tape Autoloader and MSL SAS Tape
AN976A
AN975A
Page 13
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
Libraries to Mini-SAS (SFF8088) ports.
HP SAS Min-Min 1x-2M Cable Assembly Kit
NOTE: One cable per SAS autoloader. . Use this cable to connect HPE SAS
external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088)
connectors.
HP SAS MIN-MIN 1X-4M Cable Assembly Kit
NOTE: One cable per SAS autoloader. . Use this cable to connect HPE SAS
external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088)
connectors.
Optical cables
AE470A
AE465A
OM4 LC-LC type cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Allowed cable lengths:
Drive type
All
All except LTO-5
Ultrium 3000
LTO-5 Ultrium
3000
External Cable type 2Gb
OM2
0.5m - 300m
OM3/OM4
0.5m - 500m
4Gb
0.5m - 150m
0.5m - 380m
8Gb
.5-50m
0.5m - 150m
OM3/OM4
0.5m - 150m
0.5m - 50m
0.5m - 300m
Controller/HBA & Cable Recommendation Matrix SAS
Recommended
HBA/ Controller for
tape automation
Recommended
Cable for SC44Ge
Recommended
Recommended HBA/ Controller for tape automation
HPE SC44Ge SAS Host Bus Adapter
NOTE: Recommended for Proliant G5 SAS tape automation connect.
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
NOTE: Recommended for ProLiant Gen9 SAS tape automation connect.
HPE StoreEver External SAS to Mini-SAS Fanout Cable
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
NOTE: Recommended for C series blade enclosure tape automation connect.
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS Controller
NOTE: Recommended for C series blade enclosure tape automation connect.
HPE P700m Smart Array Controller 256MB
NOTE: Recommended for C series blade enclosure tape automation connect.
HPE P700m Smart Array Controller 512MB
NOTE: Recommended for C series blade enclosure tape automation connect.
For one autoloader:
HBA/
Controller
Product
Number
726911-B21
AH587A
513778-B21
488348-B21
Page 14
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
Cables for Smart
Array Controllers
HP SAS Min-Min 1x-2M Cable Assembly Kit
NOTE: one SAS tape drive only.
HP SAS MIN-MIN 1X-4M Cable Assembly Kit
NOTE: one SAS tape drive only.
For two or more autoloaders or tape drives:
HPE StoreEver 2m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four drives.
HPE StoreEver 4m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four drives
AE470A
AE465A
AN975A
AN976A
Reference the HPE Data Agile BURA Compatibility Matrix (Formerly EBS) for the most
up-to-date HBA compatibility information at: hpe.com/storage/BURAcompatibility
Media
HPE LTO-7 Ultrium 15TB RW Data Cartridge
HPE LTO-7 Ultrium 15TB Eco Case Data Cartridge 20 Pack
HP LTO-6 Ultrium 6.25TB MP RW Data Cartridge
HP LTO-6 Ultrium 6.25TB BaFe RW Data Cartridge
HP LTO-5 Ultrium 3TB RW Data Cartridge
HP LTO-5 Ultrium 3TB WORM Data Cartridge
HP LTO4 Ultrium 1.6TB Read/Write Data Cartridge
HP LTO4 Ultrium 1.6TB WORM Data Tape Cartridge
HP LTO-3 Ultrium 800 GB Re-writable Data Cartridge
HP LTO-3 Ultrium 800 GB WORM Data Cartridge
HP LTO2 Ultrium 400GB RW Data Tape
HP LTO1 Ultrium 200GB RW Data Tape
HP Ultrium Universal Cleaning Cartridge
Bar Code Labels
HPE LTO-7 Ultrium RW Bar Code Label Pack
HP LTO-6 Ultrium RW Bar Code Label Pack
HP LTO-5 Ultrium WORM Bar Code Label Pack
HP LTO-5 Ultrium RW Bar Code Label Pack
HP LTO-5 Ultrium WORM Bar Code Label Pack
HP LTO-4 Ultrium Read/Write Bar Code Label Pack
HP LTO-4 Ultrium WORM Bar Code Label Pack
HP Ultrium 3 RW Bar Code Label Pack
HP Ultrium 3 WORM Bar Code Label Pack
HP Ultrium 2 Bar Code Label Pack
HP Ultrium 1 Bar Code Label Pack
Custom labeled Data Cartridges
NOTE: Custom labeled products allow customers to customize a specific sequence
printed on each label.
C7977A
C7977AH
C7976A
C7976B
C7975A
C7975W
C7974A
C7974W
C7973A
C7973W
C7972A
C7971A
C7978A
Q2014A
Q2013A
Q2012A
Q2011A
Q2012A
Q2009A
Q2010A
Q2007A
Q2008A
Q2002A
Q2001A
Page 15
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
HPE LTO-7 Ultrium 15 TB RW RFID Custom Labeled Data Cartridge (20 pack)
7977AF
HPE LTO-7 Ultrium RW Custom Labeled Data Cartridge 20 Pack
C7977AL
HPE LTO-7 Ultrium WORM Custom Labeled Data Cartridge 20 Pack
C7977WL
HP LTO-6 Ultrium 6.25TB MP RW Custom Labeled Data Cartridge 20 Pack
C7976AL
HP LTO-5 RW Custom Labeled Data Cartridge 20 Pack
C7975AL
HP LTO-5 RW Custom Labeled No Case Data Cartridge 20 Pack
C7975AC
HP LTO-5 WORM Custom Labeled Cartridge 20 Pack
C7975WL
HP LTO-4 Ultrium 1.6TB RW Custom Label Data Cartridge 20 Pack
C7974AL
HP LTO-4 Ultrium 1.6TB WORM Custom Label Data Cartridge 20 Pack
C7974WL
HP LTO-3 Ultrium 800GB RW Labeled Data Cartridge 20 Pack
C7973AL
HP LTO-3 Ultrium 800GB WORM Labeled Data Cartridge 20 Pack
C7973WL
HP LTO-2 Ultrium 400GB Pre-labeled Data Cartridge 20 Pack
C7972AL
HP Ultrium 200 GB pre-label Data Cartrdg 20 Pk.
C7971AL
Non-Custom Labeled Data Cartridges
NOTE: Non-Custom labels will come pre-labeled with a pre-determined number
sequence.
HPE LTO-7 Ultrium RW No Case Custom Labeled Data Cartridge 20 Pack
C7977AC
HPE LTO-7 Ultrium Non Custom Labeled Data Cartridge 20 Pack
C7977AN
HP LTO-6 Ultrium 6.25TB MP RW Non Custom Labeled Data Cartridge 20 Pack
C7976AN
HP LTO-6 Ultrium 6.25TB BaFe RW Non Custom Labeled Data Cartridges 20 Pack
C7976BN
HP LTO-5 Ultrium Non-custom Labeled Data Cartridge 20 Pack
C7975AN
HP LTO-4 Ultrium 1.6TB Non-custom Label Data Cartridge 20 Pack
C7974AN
HP Ultrium 800GB Non-custom Label 20 Pack
C7973AN
HP Ultrium 400GB Non-custom Label 20 Pack
C7972AN
HP Ultrium 200GB Non-custom Label 20 Pack
C7971AN
NOTE: For more information on LTO media, see: http://h18006.www1.hpe.com/storage/storagemedia.html?psn=storage
HPE Care Pack
Options
Same Day Response
HP 1 Year 4 hour 13X5 LTO Autoloader Hardware Support
HP 1 Year 4 hour 24x7 LTO Autoloader Hardware Support
HP 1 Year 6 hour 24x7 Call-to-Repair LTO Autoloader Hardware Support
HP 3 Year 4 hour 13X5 LTO Autoloader Hardware Support
HP 3 Year 4 hour 24x7 LTO Autoloader Hardware Support
HP 3 Year 6 hour 24x7 Call-to-Repair LTO Autoloader Hardware Support
HP 5 Year 4 hour 13X5 LTO Autoloader Hardware Support
HP 5 Year 4 hour 24x7 LTO Autoloader Hardware Support
Next Business Day Response
U6364E
U6365E
U6366E
H5526E
H4624E
U6367E
U9376E
U9377E
HP 3 Year Next business day Parts Exchange LTO Autoloader Support
HP 3 Year Next Business Day LTO Autoloader Hardware Support
Hardware Services
H2698E
H4619E
HPE Install Storage Autoloader or Tape Drive Array Service
NOTE: In order to maximize ROI and product uptime, and minimize the cost of
U2090E
Page 16
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Related Options
ownership, Hewlett-Packard Enterprise recommends the 3-year, 24 x 7 service
options. These offerings will ensure that any product issue can be tackled when
they occur (most back up issues will occur outside standard business hours) and
that the service coverage regarding period, covers the minimum expected life of
the host system.
Page 17
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Technical Specifications
1/8 G2 LTO-7 Ultrium 1/8 G2 LTO-6 Ultrium 1/8 G2 LTO-5 Ultrium
15000 Tape
6250 Tape
3000 Tape Autoloader
Autoloader
Autoloader
1/8 G2 LTO-4 Ultrium
1760 Tape Autoloader
Drive Technology
Ultrium 15000
Ultrium 6250
Ultrium 3000
Ultrium 1760
Number of Drives
1
1
1
1
Number of Slots
8
8
8
8
Drive Interface
Capacity
8Gb/sec Fibre Channel 8Gb/sec Fibre Channel 8Gb/sec Fibre Channel
6Gb/sec SAS
6Gb/sec SAS
6Gb/sec SAS
Native
48 TB
20 TB
Compressed
(2.5:1)
120 TB
50 TB
Compressed
(2:1)
Maximum
Transfer
Rate
Native
300 MB/s
Dimensions Out-of-Box
(HxWxD)
12 TB
6.4 TB
24TB
12.8 TB
140 MB/s
80 MB/s
1.7 x 19 x 31.9 in (4.4 x 48.2 x 80.9 cm)
Shipping
(HxWxD)
Weight
160 MB/s
3Gb/sec SAS
(LTO 4, 3)
10 x 23 x 39 in (25 x 58 x 99 cm)
Out-of-Box
25.4 lb (11.5 kg)
Shipping
33.7 lb (15.3 kg)
NOTE: The weight of the Autoloader varies a slight amount with the type of LTO drive used.
Reliability MSBF
(mean swaps
between
failures)
2 Million robot load/unload cycles
MTBF
(mean time
between
failures)
100,000 hours (based on 1M MSBF)
Cartridge Swap Time
34 seconds average (drive to slot, slot to drive)
Initialization Time
76 seconds
Inventory Time
52 seconds (with bar code labeled cartridges)
Connectors
Mini-SAS (1/8 G2 SAS models)
LC Short-wave Optical Fibre Channel (1/8 FC models)(1) RJ-45 (located on back of 1/8 G2)
(1) USB port (located on back of 1/8 G2)
Ready LED (Green): shows ready status information
Clean LED (Amber): shows fault status information
Attention LED (Amber): shows fault status information
LED Indicators
(on front panel)
Page 18
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Technical Specifications
Management Interface
Error LED (Amber): shows fault status information
10/100 Mbits/second, auto-configuring interface. RJ-45 connection. Https configurable.
Power
80 Watts (max)
Input Requirements
100 to 240 VAC, 50 to 60 Hz
Relative Humidity
(non-condensing)
10-80%RH
90% RH
5°C to 40°C
-40°C to 60°C
15,000 feet
35,000 feet
Temperature Range
(wet bulb)
Altitude
Operating
Shipping
Operating
Shipping
Operating
Shipping
Page 19
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Summary of Changes
Date
31-Mar-2016
Version History
Version 46 to 47
Action
Changed
15-Jan-2016
01-Dec-2015
20-Mar-2015
Version 45 to 46
Version 44 to 45
From Version 43 to 44
Changed
Changed
Added
16-Jan-2015
From Version 42 to 43
Added
31-Oct-2014
15-Sep-2014
04-Jul-2014
From Version 41 to 42
From Version 40 to 41
From Version 39 to 40
Changed
Changed
Changed
09-May-2014
18-Mar-2014
22-Feb-2013
From Version 38 to 39
From Version 37 to 38
From Version 36 to 37
Changed
Changed
Changed
Description of Change:
Updated HPE rebranding, part no corrections and FIPS 140-2
support information for Fusilli launch.
Edited for content
Multiple Changes incl. LTO-7 SKUs added
Added the two SAS cables 716191-B21 and 716193-B21. These
are used to connect the Autoloader to the HPE H241 Smart
Host Bus Adapter.
Added below under 'Recommended HBA/Controller for tape
automation':
HPE H241 12Gb 2-ports Ext Smart Host Bus Adapter 726911B21
NOTE: Recommended for ProLiant Gen9 SAS tape automation
connect.
Changes made throughout all the QuickSpecs.
Edited the Configuration Information section.
Product Highlights – Encryption; Configuration Information –
removed Note above Step 1 Base Configuration; Configuration
Information – Step 1 – Base Configuration – SAS models –
removed (1) 2M External Infiniband (SFF8470) to Mini SAS
(SFF8088) 1x SAS Cable and changed description for the MinMin cable assembly; Step 2 – Additional Options – added note
at the top of this section; Related Options – Encryption –
updated existing NOTE and added 5 more NOTES; Cable Kits
(SCSI, SAS, FC) – update Notes for AE470A, Updated Note for
AE465A; fix a few minor typos in the Related Options – Media
section.
Recommended Services was revised.
Media was revised.
Updated the following Sections
Key Features
Product highlights
Compatibility
Configuration Information
Related Options
Removed
Technical Specifications
Customer Benefits
Page 20
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Summary of Changes
18-Jan-2013
From Version 35 to 36
Changed
04-Dec-2012
05-Oct-2012
From Version 34 to 35
From Version 33 to 34
Changed
Changed
24-Sep-2012
07-Sep-2012
17-Aug-2012
08-Aug-2012
18-Jun-2012
06-Apr-2012
16-Mar-2012
10-Feb-2012
From Version 32 to 33
From Version 31 to 32
From Version 30 to 31
From Version 28 to 30
From Version 27 to 28
From Version 26 to 27
From Version 25 to 26
From Version 24 to 25
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Added
30-Sep-2011
From Version 23 to 24
Changed
08-Jul-2011
08-Jun-2011
06-Oct-2010
From Version 22 to 23
From Version 21 to 22
From Version 20 to 21
Changed
Removed
Changed
27-Sep-2010
From Version 19 to 20
Added
Service
Updated Capacity in Technical Specifications.
Changes made throughout all the QuickSpec.s
Change made to URL in Service and Support, HPE Care Pack
and Warranty Information section.
Changes made throughout the QuickSpec.s
Changes made in the North America and Canada versions only.
Changes made in the Related Options section.
Changes made in the North America and Canada versions only.
Changes made in the North America and Canada versions only.
Changes made in the Related Options section.
Changes made in the Related Options section.
Added HPE Smart Array P711m and HPE Smart Array P712m
adapters to the options section.
Drive Interface and Operating Altitude were revised in
Technical Specifications
Linear Tape File System (LTFS) and HPE StoreOpen
Automation were added to Product Highlights and Optical
Cables was added to Related Options
Changes made in the Configuration Information section.
StorageWorks was removed.
Changes made in Step 1 of the Configuration Information
section only.
Easy and economical upgrade of the included software to Data
Protector Express and Data Protector backup and recovery
software were added to Product Highlights
HPE 1/8 G2 LTO-5 Ultrium 3000 FC Tape Autoloader and HPE
Data Protector Express Basic backup and recovery software for
Windows/Linux/Netware were added to Step 1
Changed
Upgrade included software to Data Protector Express was
added to Media
Overview was updated
Software in the Box was changed to Included backup and
recovery software in Product Highlights
1/8 G2 LTO-2 Ultrium 448 Tape Autoloader was removed
21-Jul-2010
From Version 18 to 19
Added
24-Jun-2010
From Version 17 to 18
Added
21-Jun-2010
From Version 16 to 17
Changed
5642 (42U) Rack Cabinet was removed from Rack Cabinets
HPE 1/8 G2 LTO-5 Ultrium 3000 SAS Tape Autoloader /
BL536A to the Configuration Information section in the North
America and Canada versions.
HPE 1/8 G2 LTO-5 Ultrium 3000 SAS Tape Autoloader /
BL536A to the Configuration Information section.
Service and Support, HPE Care Pack, and Warranty Information
was completely revised
Page 21
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Summary of Changes
LTO-5 Ultrium 3000 Tape Autoloader was added
Mentions of HPE ProLiant G7 Servers were added to SAS Host
Bus Adapters
25-Nov-2009
From Version 15 to 16
Changed
27-Mar-2009
From Version 14 to 15
Added
22-Aug-2008
From Version 13 to 14
Changed
15-Aug-2008
From Version 12 to 13
Changed
Data Privacy was removed from Product Highlights
SAS and SCSI Host Bus Adapters and Cable Kits were modified
in the Related Options section and Controller/HBA and Cable
Recommendation Matrix was added to Related Options.
HPE U320e SCSI Host Bus Adapter to the Related Options
section.
ATS data transfer rate range for the LTO Ultrium Tape Drives
in the Data Rate Marketing section of the Product Highlights.
Changes were made to the following sections:
Overview:
Customer Benefits
Family Comparison
Product Highlights: Data Rate Matching
Configuration Information: Step One
16-Jul-2008
From Version 11 to 12
Changed
16-Jun-2008
From Version 10 to 11
Changed
22-Feb-2008
From Version 9 to 10
Changed
11-Feb-2008
From Version 8 to 9
Changed
25-Jan-2008
From Version 6 to 7
Added
24-Aug-2007
From Version 6 to 7
Changed
07-Aug-2007
19-Jun-2007
From Version 5 to 6
From Version 4 to 5
Changed
Changed
07-Jun-2007
26-Mar-2007
From Version 3 to 4
From Version 2 to 3
Added
Changed
08-Dec-2006
From Version 1 to 2
Changed
Technical Specifications
Changes affected the North America and Canada versions only.
Just the date and version were changed in the Worldwide and
EMEA versions.
Changes were made throughout the entire QuickSpec except
for the Service and Support section.
Changes were made within the Product Highlights, Related
Options and Technical Specifications sections.
Changes were made throughout the QuickSpec to reflect the
addition of "1/8 G2 LTO-4 Ultrium 1760 Tape Autoloader"
option.
"For tape drives and media, 1 GB = 1 billion bytes. Actual
formatted capacity is less." was added as the last line in the
Copy Right information.
Changes made within the Product Highlights and Related
Options sections.
Corrected a formatting error in the PDF only.
Changes made within the What's New, Compatibility
Information and Related Options sections.
Added EMEA version.
Changes made throughout the QuickSpec except in the
Compatibility and Service and Support sections.
Updated the following sections: Step 1 – Base Configuration –
cable length
Page 22
QuickSpecs
HPE StoreEver 1/8 G2 Tape Autoloader
Summary of Changes
Sign up for updates
Rate this document
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for HPE products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HPE shall not be liable for technical or editorial errors or
omissions contained herein.
For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.
c04123291 - 12630 - Worldwide - v47 - 31-March-2016
Page 23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising