Instruction Guide
Instruction Guide
Book 0
BE CAREFUL!
Warning! Not suitable for children under 3 years. Small parts. Choking Hazard. Only operate
the toy indoors under adult supervision. Assemble and set up with an adult too. Do not open
your Cubetto, remove internal components, operate if damaged, and/or if broken.
Rechargeable batteries can be used, but may not last long. Do not mix alkaline batteries,
standard (carbon-zinc) or rechargeable (nikel-cadmium) batteries. Remove batteries after
long periods of inactivity. Non-rechargeable batteries are not to be recharged. Rechargeable
batteries are only to be charged under adult supervision. Rechargeable batteries are to be
removed from the toy before being charged. Different types of batteries or new and used
batteries are not to be mixed. Batteries are to be inserted with the correct polarity. Exhausted
batteries are to be removed from the toy. The supply terminals are not to be short-circuited.
For tips & hints on using the playset
visit primotoys.com/resources
Illustrations by Momo
Hi!
I’m Cubetto, the little wooden robot who
loves to explore and play, but I need your
help!
Will you be my friend and help me find my
way?
Let’s get started!
In my box you will find:
1. Me! - Cubetto the wooden robot
2. Interface Board - My control panel
3. 16 Blocks - My commands
4. World Map - My playground for adventure!
3
1
Cubetto
I’m always ready for adventure. Take
me out of the box so we can meet!
As you can see, I have two wheels.
Each wheel has one motor.
My shell is wood, my bones are plastic,
and my brain is a computer.
All that’s missing is you to give me
directions.
4
5
Queue
2
Board
My Board is very
important. It’s how you
talk to me.
Use it with my colourful blocks
and tell me where to go.
On my Board are my Queue, my
Function Line, and a Go button.
6
Go
Function Line
7
3
Blocks
My blocks come in different shapes and
colours. Each one gives me a different
instruction.
When you place a block into my Board
and hit Go I will make my move.
A series of blocks in a row is called a
program.
These are my basic commands:
Green - moves me forward 15 cm
Red - turns me right 90º
Yellow - turns me left 90º
Blue - executes a function
8
Forward
Right
90°
Left
90°
Function
9
4
World Map
My maps are playgrounds for our
adventures. There are many exciting
places we can explore together.
Do you see how it is made up of lots of
squares? This is called a grid. It will
help you see where I can go.
I love new experiences and have several
maps to collect. Whenever you’re ready
for something new, just grab a new
map!
N
WE
10
S
11
5
Power and pair
To get me started I need six AA
batteries, three for me, and three for
my Board.
Flip us upside down and insert the
batteries. Once done, switch us both
ON. I will beep and my Board’s lights
will flash.
12
Next, we need to be paired. Do this
by placing one green block on the first
space of the board and hit Go.
I should move forward. If I don’t, turn us
both off, then try again.
13
6
Programming Cubetto
To write a program, place the blocks in
a sequence on my Board.
Notice how my Queue curves like a
snake? This is the order you must
follow.
Once you’ve written your program, hit
the Go button and watch me head off.
14
15
7
Function Line
Remember the Function Line? It can do
some really cool things.
Let me teach you...
If you want to give the same set of
directions more than once, put that
sequence in the Function Line.
Now you can use the blue block in the
Queue every time you want to recall
that sequence.
This is called a subroutine..
16
17
Now that you know all about me, let’s play!
When you are ready, open Cubetto’s First Day
to learn a little more and see if you’re up to
some challenges!
18
Need help?
Want it in your school? edu@primotoys.com
Want to chat with us? support@primotoys.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changed or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate equipment.
Cubetto
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause
harmful interference. (2)This device must accept any interference received including interference that may cause undesired operation.
IC Statement: This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Interface
IC Statement:
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause
interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Manufactured by Solid Labs Ltd.
Unit 19, 14 Southgate Road,
London, N1 3LY
19
Designed by Primo in London
Printed in China
2016 © Solid Labs LTD
ALL RIGHTS RESERVED
Primo Toys is a trademark of Solid Labs LTD
primotoys.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising