Two Post Seismic Relay Rack
Network Equipment Racks & Accessories
Two Post Seismic Relay Rack
NETWORK EQUIPMENT
RACKS & ACCESSORIES
19" & 23" Panel Mounting, Welded Steel
■
■
■
■
■
■
■
■
■
■
■
■
■
Independently tested to the NEBS GR-63-CORE Seismic Zone 4 standard and rated for
900 lbs. (408kg) of equipment
Independent testing conducted in accordance with ICBO AC156 standard for use
up to 900 lbs. (408kg).
Conformance to EIA/ECA-310-E.
Mounting rail spacing is adjustable from 3" (76mm) to 8" (203mm).
43 RMU (rack mounting units).
Open top, bottom, and sides permit unlimited cable management options.
Industry standard mounting holes on sides allow attachment of vertical cable managers.
Top angles drilled for runway attachment.
Openings in front and rear of base for duplex receptacle mounting.
Holes for grounding provided in four locations.
Tubular steel frame provides a high degree of strength
to weight ratio.
Concrete installation requires (4) AWA-62-350 (sold separately)
Standard finishes: Flat Black Powder Coat (FB) or
Telco Gray Powder Coat (TG),
Other finishes are available upon request
OPA *
Adjustable
Depth
Mounting
Rails
84”
(2133mm)
15”
(381mm)
61/8”
(155mm)
97/8”
115/8”
(295mm)
(251mm)
19” = 243/4” (628mm)
23” = 283/4” (730mm)
‘W’
Part Number
‘A’
Height
In.
(mm)
In.
(mm)
84”
(2133)
243/4”
(628)
23" (584mm) Rack Width
SB85223084___
84”
(2133)
283/4”
(730)
19"
✔
‘W’
Overall Width
(482mm)
Mounting
Spaces
Shipping
Weight
Lbs.
(kg)
45
130
(58.9)
45
137
(62.1)
Rack Width
SB85219084___
Note: Also available in 96” (2438mm) height. (Insert 96 for 84 in Part Number)
✔ FB is a popular item
*See page 8 for OPA details.
18
Comm Data
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising