hyper-kbn - Steatite Embedded
Single Board Computer
Embedded Board
HYPER-KBN
Pico-ITX SBC Supports AMD® Embedded G-Series SoC with DDR3, DVI-I/LVDS,
GbE, USB 3.0, SATA 6Gb/s, Audio and RoHS
Flexible Application
Small size form factor: Pico-ITX
Power Button
Reset Button
w w w.ieiworld.com
Front Panel
Audio
Thin
Client
RS-232
AMD
SoC
Video Surveillance
Digital Signage
SATA 6Gb/s
2 x USB 2.0
Specifications
SoC
AMD® Embedded G-Series SoC
GX-415GA on-board SoC (1.5GHz, quad-core, 2MB cache, TDP=15W)
GX-210HA on-board SoC (1.0GHz, dual-core, 1MB cache, TDP=9W) (support fanless
solution)
GX-420CA on-board SoC (2.0GHz, quad-core, 2MB cache, TDP=25W) (by request)
GX-217GA on-board SoC (1.65GHz, dual-core, 1MB cache, TDP=15W) (by request)
BIOS
AMI UEFI BIOS
Memory
One 204-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM unbuffered DIMMs
support up to 8GB
Graphics Engine
GPU frequency 500MHz (Radeon™ HD 8330E) for GX-415GA
GPU frequency 300MHz (Radeon™ HD 8310E) for GX-210HA
GPU frequency 600MHz (Radeon™ HD 8400E) for GX-420CA
GPU frequency 450MHz (Radeon™ HD 8280E) for GX-217GA
Support DX11.1, OpenGL 4.1 and OpenCL1.2
UVD4.2 decode for H.264, MPEG2/4, VC1, MVC
VCE 2.0 encode for H.264, VCE
Display Output
DVI-I (DVI-D up to 1920x1200@60Hz, VGA up to 2048x1536@60Hz)
18-bit single-channel LVDS (up to 1600x900@60Hz)
Ethernet
LAN: Realtek RTL8111E controllers with ASF2.0 supported
I/O Interfaces
1 x RS-232
1 x SATA 6Gb/s with 5V SATA power connector
2 x USB 3.0 (on rear I/O) 2 x USB 2.0 (by pin header)
Audio
Realtek AL662 HD Audio codec
1 x Analog audio by 10-pin (2x5) header
Front Panel
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
LAN LED
2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED
Fan Connector
1 x 4-pin system fan connector
Watchdog Timer
Software programmable, support 1~255 sec. system reset
Power Supply
12V only DC input
1 x External DC power jack (ø5.5 mm)
Support AT/ATX mode
Power Consumption
+12V@ 1.45A (AMD GX-415GA 1.5GHz CPU with 1333MHz 2GB DDR3 memory)
Operating Temperature
0°C ~ 60°C
Storage Temperature
-10°C ~ 70°C
Operating Humidity
5% ~ 95%, non-condensing
Dimensions (LxW)
100mm x 72mm
Weight
GW:600g/ NW:250g
Portable Medical
Equipment
Robotics
Embedded System
DC 12V input
DVI-I
DDR3
1600
LAN
2 x USB 3.0
USB
USB 3.0
SATA 6Gb/s
GbE
Features
1. Pico-ITX form fator with AMD® Embedded G-Series SoC supports DDR3/DDR3L up to 1600MHz
memory
2. 12V only single voltage design for AT/ATX power by DC power jack
3. DVI-I and 18-bit singel-channel LVDS support for dual display
4. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Packing List
1 x HYPER-KBN single board computer
1 x SATA with 5V output cable kit (P/N: 32801-000201-300-RS)
1 x Audio cable (P/N: 32000-072100-RS)
1 x RS-232 cable (P/N: 32200-000049-RS)
1 x Specific heatsink
1 x One Key Recovery CD
1 x QIG
1 x Utility CD
Ordering Information
Part No.
Description
HYPER-KBN-4151-R10
Pico-ITX SBC with AMD 28nm quad-core GX-415GA 1.5GHz
(15W) SoC processor, DDR3 DVI-I/LVDS, GbE, SATA 6Gb/s,
USB 3.0, HD Audio and RoHS
HYPER-KBN-2101-R10
Pico-ITX SBC with AMD 28nm dual-core GX-210HA 1.0GHz
(9W) SoC processor, DDR3 DVI-I/LVDS, GbE, SATA 6Gb/s,
USB 3.0, HD Audio and RoHS
32000-070301-RS
Dual-port USB cable
HYPER-KBN-2014-V11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising