STAR-Let200 Series

STAR-Let200 Series
STAR-Let200 Series
Smarter M2M
Fully Programmable GSM/GPRS MCU
STAR-Let is the most compact fully-programmable GSM/GPRS MCU. It's a complete system, just needing
power, RF antenna, peripherals and application software to create a diverse range of class-leading products
in automotive, security, health, telemetry and control. Its low power consumption makes it ideal for all
battery-powered applications. An Eclipse-based toolkit speeds application development, and comprehensive
graphical diagnostic accelerate product validation and field trials. STAR-Let 200 Series is backed-up by
CCww's engineers' 22 years experience in GSM, making your M2M faster, smaller, and smarter.
Power supply
Single supply voltage 3.3V- 5.5V
Power consumption
Configurable modes via AT-cmd
STAR-Let 200 Series
Deep Sleep: 50uA
DRX-5 with GPRS attach: 1.8mA
Idle: 25mA
Call: <160mA (1800/1900) <200mA (850/900)
Class 12 GPRS: 220mA to 435mA
Frequency bands
Top view
200D : Dual-band 900/1800
200Q : Quad-band 850/900/1800/1900
Compliant to GSM/GPRS Phase 2/2+
GPRS connectivity
Class B; GPRS multi-slot class 12
Transmit power
Class 4: (2W@850/900MHz)
Class 1: (1W@1800/1900MHz)
Audio interfaces
Two analog audio interfaces.
One digital audio interface (PCM)
Audio speech codec modes HR, FR, EFR, AMR
Reverse view
TCP/IP stack
Embedded; UDP capability; PPP
CSD: Transparent & non-transparent; Gp 3 Fax Class 1, to 14.4 Kbps
Accessible via AT-commands, up to 182 char
MT, MO, CB, Text and PDU mode
SIM interface
Supports 1.8V/3V
Extensive I/O
11 GPIO; I2C and SPI & parallel display bus; 5x5 keypad; DAC/ADC;
Serial Port Mux (3GPP TS 27.010 )
External antenna
Connected via antenna pad
Real time clock
Implemented; programmable alarm wake (via AT-cmd); 32KHz clock-out
Battery management
On-board; configurable; just add battery
Memory available to user
RAM: 1MB; Flash: 960KB; Flash file-system: 3MB
Application Development
Graphical integrated development environment option based on Eclipse
for C-based application development; sample applications; graphical
debug/field-trial tools
Firmware upgrade
User application upgrade via UART interface or Over The Air (OTA)
Temperature range
Normal operation: -20°C to +70°C; extreme: -30°C to +80°C
Storage: -30°C to +85°C
82-pin castellated LGA; 27 x 29 x 2.75 mm, Weight: <5g
Evaluation Kit (SL-EVK)
Mother-board, Quad-band modem, mains adapter, software tools
Order code
SL200D (dual-band); SL200Q (quad-band); SL200QCB (on carrier board)
to special order
For more information, contact
© 2013; CCww.
Specification subject to revision
(Printed 04/03/13 14:31)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF