3D/Multi-View Product Manual

3D/Multi-View Product Manual
3D/Multi-View Product Manual
1
Function,This item has two functions.
1.1 Multi-View/Multi-Picture/Multi-Camera System(2D)
Up to 4 ways CVBS video signal,Merge 2/3/4 ways video input to one video
input.Achieve PIP(Picture in Picture)function,and we can switch to different MV
modes via buttons or radio receiver,moreover,we can switch to different cams’
standalone image model via another radio receiver signal.
1.1.1 For the video output,It’s stardard CVBS signal,Can be connected to AV
supported devices,Wireless transmitters and third party OSDs.
1.1.2 6 Multi-View modes,Please check the " Multi-View Schematic"。
1.2 3D Video Output
The
left
and
right
two-way
videos,through
3D
video
processing
procedures,then we have one way true 3D video.
1.2.1 This item’s 3D video output is stardard CVBS signal,can be connected
to display devices or wireless transmitters.
1.2.2
This item’s 3D video formart,Contains HSBS(Half Side By Side and
SBS(Side By Side)(Cropping),Can be switched by button or radio receiver.
1.2.3 3D Cam,Please use FPVELITE 3D Cam,and it can be rebranded.
1.2.4 During FPV to watch this item’s 3D video,We usually use Headset or
Goggles,but some of them don’t support 3D video input,Please use the Headset
of Goggles which support HSBS or SBS 3D video.
Note:3D/MV Function,Can be selected by Jumper Plug.。
2
Specification
Video input format:PAL、NTSC
Video output:One way stardard CVBS video output,
Cams supported:3D,2 Cams;Multi-View,Up to 4 Cams.
Modes switch:Button on board or Radio Receiver
Output 3D video formart:SBS(Cropping Side By Side)、HSBS(Half Side By Side)
Input power:7-12V(2S、3S)。
Size:52x40x12mm
3
FAQ
3.1 FAQ(Multi-View/Multi-Picture/Multi-Camera):
3.1.1 Multi-View Video output,which types TX supported?
Multi-View Supports all the wireless transmitter,include 5.8G,2.4G and 1,2G
3.1.2 Multi-View Can be connected to OSD?
Yes,it can connected to all the OSD available.For it’s stardard CVBS.
3.2 FAQ(3D):
3.2.1 3D video transmit,Does it need 2 TXs?
It’s one way real 3D video,One transmitter will do.
3.2.2 what Transmitters should I use for 3D video output?.
This item’s 3D video output is one way stardard 3D video output,It supports all
the transmitter,Includes 5.8G,2.4G and 1.2G
4
Multi-View/Multi-Picture/Multi-CameraSystem (2D) Schematic
Multi-View Mode switch Schematic
Single Cam Switch Schematic
5
3D View
Real Scene
After use 3D Camera ↓
HSBS(Half Side By Side)
SBS(Cropping Side By Side)
6
Product interface Description Figure:
Figure
6.1 3D/MV select:Jumper
Jumper On--->Mulit-Views
On
Mode;Jumper
Jumper off--->3D
off
Mode
6.2
7
PAL/NTSC select:Jumper
select
On--->PAL;Jumper Off--->NTSC
NTSC
Power connector interface:
Connecting to OSD /Video
Video Trasmitter /Monitor
Video Out
CAM1/Right CAM
CAM2/Left CAM
CAM3
CAM4
red line : Power 7-12V
12V
black line : GND
Power In
7-12V
8
Product Wiring Guide
Multi-View Mode Wiring Guide
3D Mode Wiring Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising