Electrical Supplies
TERMINALS
Vibralloy Terminals
The Ultimate In High Performance Design
·
·
·
·
A brass sleeve for optimum grip on insulation, strain relief and vibration protection.
The sleeve is recessed for excellent flash-over protection.
The terminal barrel features a non-slip ridge so tool slides to the end of terminal for
proper crimp and better workmanship.
Beveled leading edge for easy insulation entry.
Terminal construction features:
One-piece, burr free construction for maximum electrical conductivity. Nectro-tin
·
·
·
·
·
plating for maximum corrosion resistance. Annealed to relieve stress points and
assure maximum installed strength.
Barrel-to-pad transition designed to minimize flexing and bending.
Open-end design permits visual inspection of wire location before and after crimping.
Multiple “V” grooves in #22-4 AWG parts for maximum holding power and current flow.
Injection Molded insulations provide the highest quality terminals in the industry.
Molding insures consistent wall thickness for maximum reliability after crimping.
Funnel Barrel construction for easier installation, no wire twisting necessary, eliminates strand hangups.
Funnel barrel feature provides excellent electrical and mechanical connection.
1. Funnel design guides wire into position
2. No wire strand hangup as wire is
inserted. Fast, positive installation.
3. Wire in place ready for crimping.
Correct crimping is important to assure a strong connection.
Electrical Crimp
·
Molding offers the crimp ridge and non-slip ridge. Crimp ridge designed for positive location of tool on
terminal barrel which means fewer miscrimps. Insures good crimp contact and electrical conductivity.
Mechanical Crimp
·
·
·
·
·
·
Nylon insulated butted seam with insulation grip used where insulated barrel and positive insulation grip are
necessary or desirable.
Terminal consists of butted seam part with flared, seamless brass sleeve securely attached and covered
with flared, molded nylon sleeve.
Wire insulation positions itself against funnel portion of brass sleeve.
Crimping barrel and flared portion of sleeve provide excellent electrical contact plus mechanical stress relief
at junction of insulation and barrel.
Insulators are rated at a continuous operating temperature range from 40°F to 220°F (-4O°C to 105°C).
U.L. Listed and CSA Certified for 600 volt building wire and 1000 volt signs and fixtures.
4-1
TERMINALS
22-18 Gauge Wire Range (Red) - Nylon
0031092
#6
0031091
#8
0031417
.187
0031418
.187
0031415
.250
0031051
#6
0031052
#8
0031050
#4
0031407
.250
0031314
#10
0031095
#10
0031312
#6
0031090
#6
0031416
.250
0031094
#10
0032641
.250
0031053
#10
0032118
.250
4-2
0031054
1/4
0032133
#6
0032134
#8
0032135
#10
0032642
.250
0031111
0032101
Double Crimp
0031055
5/16
0031408
2-4-6
0031409
6-8-10
0031320
0031319
TERMINALS
16-14 Gauge Wire Range (Blue) - Nylon
0031098
#6
0031102
#8
0031331
.110
0031328
.187
0031060
#6
0031406
.250
0031097
#6
0031337
.187
0031063
#8
0031316
#10
0031101
#10
0031327
.250
0031066
#10
0031315
#6
0032136
#6
0031330
.250
0032137
#8
0032637
.250
0031069
1/4
0031072
5/16
0032716
.250
4-3
0032138
#10
0032639
.157
0031336
.157
0032638
.250
0031112
0032102
Double Crimp
0031075
3/8
0031410
2-4-6
0031411
6-8-10
0031322
0031321
TERMINALS
12-10 Gauge (yellow) - Nylon
0031104
.#6
0031107
#10
0031105
#6
0032624
.250
0032640
.250
0031078
#6
0031082
#8
0031084
#10
0031412
#6, 8, 10
0031318
#10
0031317
#8
0032643
.250
0031108
#10
0032140
#8
0032644
.250
0031113
0031085
1/4
0031086
5/16
0031324
4-4
0032141
#10
0032142
1/4
0032103
Double Crimp
0031089
3/8
0032712
.250
0031326
½
0031323
TERMINALS
Ring Tongue Terminals
·
·
Color
Code
RED
BLUE
YEL
Large Wire Ring Tongue Terminals
Safest most reliable tongue type
Can not be disconnected unless screw is
completely removed
Wire Range
(awg)
Stud
Size
Part
Number
22-18
4
0031050
22-18
6
0031051
22-18
8
0031052
22-18
10
·
·
Tough molded insulation
Funnel entry barrel
Color
Code
RED
0031053
Wire Range
(awg)
Stud
Size
Part
Number
8
10
0031175
8
1/4
0031176
8
5/16
0031177
8
3/8
0031178
22-18
1/4
0031054
8
7/16
0031309
22-18
5/16
0031055
6
10
0031179
22-18
3/8
0031056
6
1/4
0031180
BLUE
16-14
6
0031060
6
5/16
0031181
16-14
8
0031063
6
3/8
0031182
16-14
10
0031066
6
7/16
0031310
4
1/4
0031183
4
5/16
0031185
4
7/16
0031311
16-14
1/4
0031069
16-14
5/16
0031072
16-14
3/8
0031075
12-10
6
0031078
12-10
8
0031082
12-10
10
0031084
12-10
1/4
0031085
12-10
5/16
0031086
12-10
3/8
0031089
12-10
7/16
0031325
12-10
½
0031326
YEL
Multi Stud Ring Tongue Terminals
·
·
Stock one terminal for 3 different stud sizes
V-groove tongue prevents loosening due to
vibration
Wire Range
(awg)
RED
Heavy Duty Ring Tongues
·
·
YEL
25% Thicker for hi-vibration service
Designed for off-the-road equipment and
electric utilities
Wire Range
(awg)
Stud
Size
Part
Number
16-12
8
0032108
16-12
10
0032110
16-12
1/4
0032116
16-12
3/8
0032124
16-12
7/16
0032128
16-12
½
0032132
4-5
Stud
Size
Part
Number
22-18
2-4-6
0031408
22-18
6-8-10
0031409
BLUE
16-14
2-4-6
0031410
16-14
6-8-10
0031411
YEL
12-10
6-8-10
0031412
TERMINALS
Hook Terminals
·
Provides advantages of fork and ring type terminals
Combined sideways and forward movement used to install or remove
·
Wire Range
(awg)
Stud
Size
Part
Number
22-18
4-6
0031312
22-18
8-10
0031314
16-14
4-6
0031315
16-14
8-10
0031316
12-10
4-6
0031317
RED
BLUE
YEL
Snap Spade Terminals
·
·
Spring-like tongue snaps around screw locking the terminal in place
Goes on like a fork, stays on like a ring.
Wire Range (awg)
Stud
Size
Part
Number
22-18
6
0032133
22-18
8
0032134
RED
BLUE
YEL
22-18
10
0032135
16-14
6
0032136
16-14
8
0032137
16-14
10
0032138
16-14
1/4
0032139
12-10
8
0032140
12-10
10
0032141
12-10
1/4
0032142
Block Spade Terminals
Wire Range
(awg)
RED
BLUE
YEL
Stud
Size
Block Spade
Part No.
Flanged Spade
Part No.
22-18
4-6
0031092
0031090
22-18
8-10
0031095
0031094
16-14
4-6
0031098
0031097
16-14
8-10
0031102
0031101
12-10
4-6
0031104
0031105
12-10
8-10
0031107
0031108
4-6
Block
Spade
Flanged
Spade
TERMINALS
Quick Disconnects
·
·
Designed for quick reliable slip-on interconnections
Double Crimp Design with Insulation Grip prevents
potential failure from stress, shock, and vibration
·
·
Funnel Entry Design for easy wire insertion
Tab locator lip for easier quicker assembly
RED
BLUE
YEL
Wire Range
(awg)
Male Tab
Width
Type
Part
Number
22-18
.187
FEMALE
0031417
22-18
.187
MALE
0031418
22-18
.250
FEMALE
0031415
22-18
.250
MALE
0031416
16-14
.110
FEMALE
0031331
16-14
.187
FEMALE
0031328
16-14
.187
MALE
0031337
16-14
.250
FEMALE
0031327
16-14
.250
MALE
0031330
12-10
.250
FEMALE
0032624
12-10
.250
MALE
0032640
Nylon Fully Insulated Quick Disconnects
RED
BLUE
YEL
Wire Range
(awg)
Male Tab
Width
Type
Part
Number
22-18
.250
FEMALE
0032641
22-18
.250
MALE
0032642
16-14
.250
FEMALE
0032637
16-14
.250
MALE
0032638
12-10
.250
FEMALE
0032643
12-10
.250
MALE
0032644
Multi-stack Disconnect Terminals
Allows for a series of terminals to be joined together
Wire Range (awg)
Male Tab
Width
Part
Number
RED
22-18
.250
0031407
BLUE
16-14
.250
0031406
Fully Insulated Flag Right Angle Disconnect
Wire Range
(awg)
Male
Tab
Width
Type
Part
Number
RED
22-18
.250
FEMALE
0032718
BLUE
16-14
.250
FEMALE
0032716
YEL
12-10
.250
FEMALE
0032712
4-7
TERMINALS
Butt Connectors
Wire Range
(AWG)
Nylon
Part Number
Vinyl
Part Number
RED
22-18
0031111
0030410
BLUE
16-14
0031112
0031354
YELLOW
12-10
0031113
0032310
RED
8
0031186
BLUE
6
0031187
YELLOW
4
0031188
Butt Connectors - Nylon Double Crimp
·
·
Insulation grip provides increased pull out resistance
Funnel entry design; extra long seamless barrel
Wire Range (AWG)
Part Number
RED
22-18
0032101
BLUE
16-14
0032102
YELLOW
12-10
0032103
Butt Connectors - Step Down
·
Perfect solution when two wires need to be inserted in one end of a splice and a single wire in the other end
Wire Range (AWG)
Part Number
BLUE
W/ RED STRIPE
16/14 to 22/18
0039501
YELLOW
W/ BLUE STRIPE
12/10 to 16/14
0039502
Moisture Resistant Butt Connector
·
·
·
·
Premium quality nylon insulated connector with insulation grip - sealant filled; UL listed
Protects exposed electrical connections from corrosive environments
Excellent strain relief to resist the effects of vibration
Will withstand high temperature power wash solutions; road chemicals, salt spray, fertilizer
Wire Range (AWG)
Part Number
RED
22-18
0037200
BLUE
16-14
0037201
YELLOW
12-10
0037202
4-8
TERMINALS
3-Way Connectors
Wire Range
(AWG)
Nylon
Part Number
Vinyl
Part Number
RED
22-18
0031319
BLUE
16-14
0031321
0034410
YEL
12-10
0031323
0034510
4-Way Connectors
Wire Range
(AWG)
Nylon
Part Number
Vinyl
Part Number
RED
22-18
0031320
BLUE
16-14
0031322
0034610
YEL
12-10
0031324
0034710
Bullet Connectors and Snap Plugs
·
Bullet connector that mates with a snap plug receptacle allowing for fast connecting and disconnecting
BLUE
Wire
Range
(AWG)
Snap
Dia.
Nylon
Part No.
Vinyl
Part No.
Non-Insul
Part No.
Type
16-14
.157
0031336
0031710
0030017
Universal Plug
16-14
.157
0032639
Universal Receptacle
16-14
.157
0031347
Universal Double Female
Receptacle
16-14
.157
0032617
Universal Three Way Snap
Plug Receptacle
16-14
.176
0031610
0030016
Closed End Connectors
·
·
Translucent nylon insulation
Tin plated copper sleeve
Part Number
Gauge
0030040
22-18
0030041
16-10
4-9
Ford Plug
TERMINALS
Posi-Lock Connectors
No More Crimping or Loose Connections
·
·
·
The Posi-Lock Connector can connect two or more wires any
where with only a pocket knife or wire stripper!
One Posi-Lock Connector can handle a wire size range of 18 to
12 awg. Simply insert the bare wire ends into the Posi-Lock and
hand tighten. Connection Completed!
Used in both O.E.M. and aftermarket applications, the Posi-Lock has a wire pull strength of 25 to 46lbs. and
can be disconnected and reconnected over and over again.
·
·
Molded of nylon type 6/6 with a tin plated brass insert and will not corrode.
Up to 4 times stronger than crimp connectors.
·
·
Temperature rating of up to 250o C or 482o F and is chemical resistant; can be used in engine compartments
Can handle multiple wire connections; the 8 to 10 awg can handle 16 different wire combinations
Part Number
Type
Wire Size (Gauge)
0031824
Butt Connector
18 to 24
0031218
Butt Connector
12 to 18
0031008
Butt Connector
8 to 10
0036142
Y Connector
12 to 18
0036152
In-line Fuseholder (3/4 to 1-1/4)
12 to 18
0036162
Weathertite Boot
12 to 18
Posi-Lock Assortment
Part Number
Contents
0031000
26 Total Pieces
10 pieces 18-24 ga
12 pieces 12-18 ga
4 purchase 8-10 ga
4-10
TERMINALS
Krimp-N-Seal
Heat Shrink Connectors
·
Corrosion resistant - adhesive lined heat shrink tubing provides resistance to
water, salt, steam, and other contaminants.
·
Improved mechanical performance - adhesive lined heat shrink tubing adheres to
both the connector and the wire insulation providing improved pullout strength and strain relief
·
Durable heat shrink tubing improves resistance to abrasion, scoring, and the effects of long term aging.
Part No
AWG
Style
Stud Size
0039401
20-18
Ring
#6
0039402
20-18
Ring
#8
0039403
20-18
Ring
#10
0039404
20-18
Ring
1/4
0039405
20-18
Spade
#10
0039406
20-18
Butt
0039407
20-18
FemaleFIQD
.25
0039408
20-18
Male FIQD
.25
0039434
20-18
Bullet Plug
.157
0039435
20-18
Bullet Recpt
.157
Part No
AWG
Style
Stud Size
0039409
16-14
Ring
#8
0039410
16-14
Ring
#10
0039411
16-14
Ring
1/4
0039428
16-14
Ring
5/16
0039412
16-14
Ring
3/8
0039413
16-14
Spade
#10
0039414
16-14
Butt
0039415
16-14
Female FIQD
0039416
16-14
Male FIQD
.25
0039432
16-14
Bullet Plug
.157
0039433
16-14
Bullet Recpt
.157
0039436
16-14
Male QD
.250
0039437
16-14
Female QD
Color
Red
Color
Blue
.25
.250
Part No
AWG
Style
Stud Size
0039417
12-10
Ring
#10
0039418
12-10
Ring
1/4
0039419
12-10
Ring
3/8
0039420
12-10
Ring
½
0039421
12-10
Spade
#10
0039422
12-10
Butt
0039423
12-10
Female FIQD
.25
0039424
12-10
Male FIQD
.25
Color
Yellow
4-11
TERMINALS
Elektralink Solder Heat Shrink Connectors
·
Eliminate the three most common causes of electrical problems;
-Corrosion due to exposure to moisture and solvents
-Mechanical failure due to strain and vibration causing breakoff
-Wires pulling loose from connectors due to improper crimping
·
No crimping needed, just heat terminal until low melt solder flows for a strong vibration proof connection
·
Color coded transparent adhesive lined tubing seals the connection, eliminates corrosion,
bonds the terminal to the wire insulation for additional strain relief and pullout resistance.
Temperature Rating:
Dielectic Strength:
Insulation Resistance:
Tubing Spec:
Solder Spec:
-65O To 275OF
15kv
1014 Megohms
Mil-I-23053/4, Class I Ams-3634
Qq5571e, Mil-S-14256
Part No
AWG
Style
Stud Size
0039301
20-18
Ring
#6
0039302
20-18
Ring
#8
0039303
20-18
Ring
#10
0039304
20-18
Ring
1/4
0039305
20-18
Spade
#10
0039306
20-18
Butt
0039307
20-18
Female QD
.25
0039308
20-18
Male QD
.25
Part No
AWG
Style
Stud Size
0039309
16-14
Ring
#8
0039310
16-14
Ring
#10
0039311
16-14
Ring
1/4
0039312
16-14
Ring
3/8
0039313
16-14
Spade
#10
0039314
16-14
Butt
0039315
16-14
Female QD
.25
0039316
16-14
Male QD
.25
Color
Red
Color
Blue
Part No
AWG
Style
Stud Size
0039317
12-10
Ring
#10
0039318
12-10
Ring
1/4
0039319
12-10
Ring
3/8
0039320
12-10
Ring
½
0039321
12-10
Spade
#10
0039322
12-10
Butt
0039323
12-10
Female QD
.25
0039324
12-10
Male QD
.25
Color
Yellow
4-12
ELECTRICAL
Multilink Crimp/Solder Heat Shrink Connectors
·
·
·
·
High quality, brazed seam crimp connector provides a secure mechanical connection
Pre-fluxed, low temperature solder delivers superior current flow and tensile strength
Translucent, adhesive-lined heat shrink tubing allows for visual inspection and provides a seal
against corrosion
Crimped, soldered and sealed connection meets or exceeds the most stringent OEM standards
Temperature Rating:
Tensile Strength:
Dielectic Strength:
UL Voltage Rating:
-65o To 275oF
2200 psi
1000 volts/mil
600 volts
Part No
AWG
Style
Stud Size
0039701
20-18
Ring
#6
0039702
20-18
Ring
#8
0039703
20-18
Ring
#10
0039712
20-18
Spade
#10
0039429
20-18
Butt
0039715
20-18
Female QD
.25
0039716
20-18
Male QD
.25
Color
Red
Part No
AWG
Style
Stud Size
0039704
16-14
Ring
#8
0039705
16-14
Ring
#10
0039706
16-14
Ring
1/4
0039707
16-14
Ring
3/8
0039713
16-14
Spade
#10
0039430
16-14
Butt
0039717
16-14
Female QD
.25
0039718
16-14
Male QD
.25
Part No
AWG
Style
Stud Size
0039708
12-10
Ring
#10
0039709
12-10
Ring
1/4
0039710
12-10
Ring
3/8
0039711
12-10
Ring
½
0039714
12-10
Spade
#10
0039431
12-10
Butt
0039719
12-10
Female QD
.25
0039720
12-10
Male QD
.25
Color
Blue
Color
Yellow
4-14
PROBLEM: CORROSION!
STOP
WIRE
CORROSION
Corrosion damage costs the transportation
industry over $23.4 Billion
In a fleet survey, maintenance managers listed wiring
& lighting as the most frequent corrosion problem
SOLUTION: SEALED CRIMP &
SOLDERCONNECTORS
CRIMP & SOLDER CONNECTOR
MAKE
PERMANENT
REPAIRS
CRIMPED...
FOR MECHANICAL
RELIABILITY
CRIMP & SOLDER
CONNECTORS
0RS
1
A
E
Y
E
OF US
80N%
GER
STRO
SOLDERED...
SEALED...
FOR SUPERIOR STRENGTH
& CONDUCTIVITY
FOR MAXIMUM
DURABILITY
CONDUCTIVITY:
CRIMP & SOLDER CONNECTORS
Maintained their electrical conductivity after simulating
10 years of exposure to sodium chloride, magnesium
chloride, calcium chloride and other corrosive chemicals.
STRENGTH:
CRIMP & SOLDER CONNECTORS
Are over 80% stronger than
standard PVC/Vinyl
butt connectors.
FOSTER
SERVICE/QUALITY/RELIABIITY
IN-LINE BUTT CONNECTORS
JOIN TWO WIRES TO ONE WIRE ...
Color dash on tubing indicates
the wire gauge for the connector
0036700
STARTER ASSORTMENTS
Color stripes on the connector indicate
which crimp die to use
0036720
0036716
Tubing has an active adhesive that
seals between multiple wires
0036714
0036710
BUTT CONNECTORS
TOOLS
Part #
Wire Gauge
0036720 24-22 AWG
Color Stripe
Tubing Color
On Connector
Clear / White Dashes Side 1: White
Side 2: Red
0036716 20-18 AWG
Clear / Red Dashes
0036714 16-14 AWG
Clear / Blue Dashes
0036710 12-10 AWG
Wire
One 24-22 AWG
Two 24-22 AWG
Crimp Die (Insulated)
White (24-22 AWG)
Red (20-18 AWG)
Side 1: Red
Side 2: Blue
One 20-18 AWG
Two 20-18 AWG
Red (20-18 AWG)
Blue (16-14 AWG)
Side 1: Blue
Side 2: Yellow
One 16-14 AWG
Two 16-14 AWG
Blue (16-14 AWG)
Yellow (12-10 AWG)
Clear / Yellow Dashes Side 1: Yellow
Side 2: Red
One 12-10 AWG
Two 12-10 AWG
Yellow (12-10 AWG)
Red (8 AWG)
CLOSED-END CONNECTORS
0031908
Multi Purpose Crimp Tool
JOIN TWO TO FOUR WIRES ...
Tubing has an active adhesive that seals
multiple wires and eliminates wire pull-out
0031905
Self Igniting Butane
Refillable Micro Torch
Closed-end connectors are crimped here. In environments where
corrosion and/or vibration are a problem, the closed-end connector can
be used to replace wire nuts.
0036814
CLOSED END CONNECTORS
0031906
Self-Igniting Butane
Refillable Canister Torch
Part #
0036814
0036810
Connector
Wire Range
22-14 AWG
18-10 AWG
Tubing Color
Clear / Blue Dashes
Clear / Yellow Dashes
0036810
THE COMPONENTS
EASY TO INSTALL
THE MULTIPLE WIRE CONNECTOR
THE COMPETITOR’S VERSION
Thick copper wall - Difficult to crimp
1
The outside diameter of the butt connector is the same on both ends and only the inside diameter is
adjusted for the different wire gauge. This means that the side for the smaller wire has a much thicker
wall than normal and is extremely difficult to crimp. POTENTIAL FOR WIRE PULL-OUT!
OUR VERSION
Window for visual inspection
Crimp indicator
STRIP WIRES
& INSERT
Uniform copper wall - EASY to crimp
Crimp indicator
The inside AND the outside diameter of the connector is varied which means that both sides will make a
sound mechanical crimp.
2
The barrel has two stripes - one on each end - to indicate which wire size to insert. Plus, the stripe
matches the crimp die that needs to be used. For example, the blue stripe indicates the side
where a 14 or 16 AWG wire is to be inserted, and it will be crimped in the blue crimp die.
STRONG MECHANICAL TERMINATION!
CRIMP IT
ADDITIONAL FEATURES OF THE CRIMP CONNECTOR
•
•
•
•
Seamless butt connectors provide superior crimp performance
Window in butt connectors allows for visual inspection to ensure all wires are fully inserted
Butt connectors have indicators where the installation tool should be positoned to crimp connector
Wire-stop in butt connector prevents over-insertion of the wires
THE HEAT SHRINK TUBING
3
• High adhesive-flow polyolefin to seal multiple wires
• Color-coded dash on tubing to indicate the
wire gauge for the connector
• Clear tubing to allow for visual inspection
PROBLEMS:
SOLUTION:
EXISTING METHODS:
SEALED MULITPLE
WIRE CONNECTORS:
QUICK-TAP
HEAT IT
3-WAY CONNECTOR
4
ADDING WIRE
IN-LINE CONNECTOR
UNSEALED CONNECTOR
PROBLEMS:
SOLUTION:
EXISTING METHODS:
SEALED MULITPLE
WIRE CONNECTORS:
WIRE NUT
END-CAP
CLOSED-END CONNECTOR
SEAL IT
TERMINALS
MultiLink Crimp/Solder Heat Shrink Connectors
·
·
·
·
High quality, brazed seam crimp connector provides a secure mechanical connection
Pre-fluxed, low temperature solder delivers superior current flow and tensile strength
Translucent, adhesive-lined heat shrink tubing allows for visual inspection and provides a seal
against corrosion
Crimped, soldered and sealed connection meets or exceeds the most stringent OEM standards
Temperature Rating:
Tensile Strength:
Dielectic Strength:
UL Voltage Rating:
-65o To 275oF
2200 psi
1000 volts/mil
600 volts
Part No
AWG
Style
Color
0039429
20-18
Butt
Red
0039430
16-14
Butt
Blue
0039431
12-10
Butt
Yellow
The Components
The Crimp Connector:
·
·
·
·
Zippered brazed seam for
superior crimp performance
Window for visual inspection
Wire stop to prevent overinsertion
Serrated inner barrel for
extra crimp strength
The Solder:
·
·
·
The Heat Shrink Tubing:
Flux coated to clean metal
surfaces
Premeasured solder to
deliver the right amount
Low temp solder alloy for
ease of installation
4-13
·
·
·
Adhesive lined polyolefin to
seal the connection
Color coded with wire gauge
imprint for easy size
identification
Translucent tubing to allow for
visual inspection
TERMINALS
MultiLink Crimp/Solder Heat Shrink Connectors
·
·
·
·
High quality, brazed seam crimp connector provides a secure mechanical connection
Pre-fluxed, low temperature solder delivers superior current flow and tensile strength
Translucent, adhesive-lined heat shrink tubing allows for visual inspection and provides a seal
against corrosion
Crimped, soldered and sealed connection meets or exceeds the most stringent OEM standards
Temperature Rating:
Tensile Strength:
Dielectic Strength:
UL Voltage Rating:
-65o To 275oF
2200 psi
1000 volts/mil
600 volts
Part No
AWG
Style
Color
0039429
20-18
Butt
Red
0039430
16-14
Butt
Blue
0039431
12-10
Butt
Yellow
The Components
The Crimp Connector:
·
·
·
·
Zippered brazed seam for
superior crimp performance
Window for visual inspection
Wire stop to prevent overinsertion
Serrated inner barrel for
extra crimp strength
The Solder:
·
·
·
The Heat Shrink Tubing:
Flux coated to clean metal
surfaces
Premeasured solder to
deliver the right amount
Low temp solder alloy for
ease of installation
4-13
·
·
·
Adhesive lined polyolefin to
seal the connection
Color coded with wire gauge
imprint for easy size
identification
Translucent tubing to allow for
visual inspection
TERMINALS
Non Insulated Quick Connect Adapters
Part Number
Blade Width
Description
0032632
.250
Converts One Power Block 1/4 Tab To
Two Tabs
0032631
.250
Converts One 1/4" Male Tab To Two
Male Tabs
0032633
.250
Power Block 1/4" Tab
0031334
.250
Insulated Tab Receptacle
For Connecting Two Female
Quick Disconnects
Cross-lock Disconnects
·
Self-mating parts
Wire Gauge (AWG)
Tab Width
Part Number
RED
22-18
.250
0033620
BLUE
16-14
.250
0033610
Non-Insulated
16-14
.250
0030036
Male Quick Disconnect Tongue Adapters
Stud Size
Male Tab Width
Part Number
6
.187
0032627
6
.250
0032628
10
.250
0032629
4-14
TERMINALS
Uninsulated Ring Tongue
·
High heat
Wire Range
(awg)
Stud
Size
Part
Number
22-18
6
0030001
22-18
10
0030002
22-18
1/4
0030003
16-14
6
0030007
16-14
10
0030008
16-14
1/4
0030009
12-10
10
0030018
12-10
1/4
0030019
12-10
3/8
0030020
Uninsulated Spade Terminal
·
High heat
Wire Range
(awg)
Stud
Size
Part
Number
16-14
10
0030012
12-10
10
0030022
Uninsulated Butt Connector
·
High heat
Wire Range
(awg)
Part
Number
22-18
0030004
16-14
0030013
12-10
0030023
Uninsulated Quick Slide
·
High heat
Wire Range
(awg)
Tab
Size
Type
Part
Number
16-14
.250
Female
0031350
16-14
.250
Male
0031351
4-15
TERMINALS
Weather Pack Connectors
·
The weather pack is designed for the engine compartment of a vehicle. Use weather packs for automotive,
marine, agricultural and other harsh environmental applications.
·
Positive, snap-action locking. Secondary locking helps terminal retention and provides access to the terminals for service.
·
Stops in all cavities to insure proper insertion of terminals.
·
All connectors are indexed to prevent mis-mating.
Nylon housing rated -40oC to 125oC.
·
Female Housing
Part Number
Male Housing
Part Number
Contacts
0039601
0039611
1-Way
0039602
0039612
2-Way
0039603
0039613
3-Way
0039604
0039614
4-Way Flat
0039606
0039616
6-Way Flat
Weather Pack Terminals
·
·
Flex-pin and lap lock design give terminals a positive connection rated for a continuous current of 19 amps.
·
·
Cable seal crimp wings reduce strain on the cable core and assure proper positioning of the cable seal.
All terminals are tin plated.
Dual “tangs” lock the terminal into the connector cavity.
Part Number
Description
Gauge
0039620
Female
20-18
0039621
Female
16-14
0039624
Female
12
0039622
Male
20-18
0039623
Male
16-14
0039625
Male
12
Cavity Seals and Plugs
·
·
·
·
Seals and plugs are made of self-lubricating silicone.
Multiple “ribs” seal against dust, moisture, engine compartment fluids and chemicals.
Cavity seals are crimped to the terminal to assure positive position of the seal in the housing cavity.
The cavity plug is designed to fill and seal unused cavities.
Part Number
Description
Color
0039607
Cavity Seal - 12 gauge
blue
0039609
Cavity Seal - 16-14
grey
0039610
Cavity Seal - 20-18 gauge
green
0039608
Cavity Plug
green
4-16
TERMINALS
Weather Pack Tools
Part Number
Description
0039626
Removal Tool
0039627
Multi Gauge Crimper, 20-14 gauge
Weatherpack Terminal Assortment
Part No
Description
Comp
Pieces
Contents
1930172
Weatherpack Connectors
21
145
1, 2, 3, 4, 5 & 6 cavity, male and
female. Plugs, seals, connectors
and tool.
4-17
TERMINALS
Scotch Lok Self-Stripping Connectors
·
·
Quickly connect two or three wires without prior stripping
No special tools- crimp with common plier
Part Number
AWG
Color
Rating
0037203
22-14
Blue Cap
Grease Filled
Scotchlok
UL- CSA
600V Max
Mates With
Connection
Pigtail
0033236
18-14
Blue
Scotchlok
UL
600V Max
In-Line Splice
0033234
18-14
Blue
Grease Filled
Scotchlok
UL
600V Max
In-Line Splice
0033238
12-10
Yellow
Scotchlok
UL
600V Max
In-Line Splice
0033237
18-14
Black
Scotchlok
0033239
18-14
Blue
T-Tap
0033240
22-18
0033241
0035500
16-14
Universal
Bullet 0031710
Receptacle
UL & CSA
16-14
FI Male
Quick Slide
0032638
Mid-span Tap
Red
T-Tap
UL & CSA
22-18
FI Male
Quick Slide
0032642
Mid-span Tap
12-10
Yellow
T-Tap
UL & CSA
12-10
FI Male
Quick Slide
0032644
Mid-span Tap
18-14
Blue
In-line
Fuseholder
20 Amp Max
Fuse
Blade Type
(ATC)
In-line Fuse
4-18
TERMINALS/TAPE
Moisture-Resistant Tap Connector
·
·
·
·
No cutting, stripping, or taping required
Moisture-resistant gel protects wires from corrosive environments
Special locking cap insures a protected connection over time
Applications: making tap connections for trucks, cars, snowmobiles, motorcycles, boats, trailers off road equipment, and outdoor lighting and landscape lighting
Part No.
AWG
Color
Rating
Connection
0033234
18-14
Blue
UL 600V
In-line splice
Moisture Sealant Patches
·
·
Pre-cut patches apply quickly and easily
Self-fusing rubber-based insulating mastic
·
·
·
·
Moisture proofs connections
Adds strain relief to splices
Tough vinyl backing provides protection against abrasion and road grime
INSTRUCTIONS: 1.Remove liner
2. Position connector in center of pad
3. Press the pad closed and squeeze ends to ensure complete seal.
Part No.
Size
Max Volts
0031432
2-1/2" X 2-1/2"
300/MIL
0031433
2-1/2" X 10’
300/MIL
Silicone Dielectric Grease
Part Number
Size
5140212
3 oz.
4-19
TAPE
Insul-wrap Fusion Repair Tape
·
Heavy-duty self-fusing silicone tape cures within 24 hours at room temperature to form a permanent,
one-piece insulator
·
·
·
·
·
Special triangular guide line facilitates wrapping, cuts taping time
Insul-wrap is not tacky and will not bond to other surfaces
Wide Temperature Range -600C TO 2000C
Dielectric strength 400 volts/mil (20 mil thickness)
To use, remove plastic backing and wrap under tension following guide line.
Part Number
Size
Color
1530022
1” X 30’
Orange
Insul-bond Rubber Electrical Tape
·
·
High quality unvulcanized rubber compound suitable for insulation of joints in electrical wires and cables
·
·
Dielectric strength 450 volts/MIL
Tensile strength 325 psi
·
·
UL Approved, meets SPEC. HH-T-111C, D-119-59T
To use remove blue plastic liner and wrap under tension 50% with an overlap
Can withstand 450% elongation before breakage occurs
Part Number
Size
Color
1530023
3/4” X 22’
Grey
Self Fusing Tape
·
·
·
Linerless rubber (EPR) insulating tape
Provides immediate moisture seal and void free buildups
Can be used for low and high voltage applications to 69kV
Part Number
Size
Color
0031425
3/4” X 15’
Black
4-20
TAPE
Vinyl Electrical Tape
Part Number
Size
0030911
3/4” x 66’
Description
·
·
·
Resistant to water, oils and corrosive chemicals
Pressure sensitive....grips fast, sticks tight
7 mils thick, high dielectric strength: 1000 volts
min
Vinyl Color Coding Tape
·
·
·
Resistant to water, oils and corrosive chemicals
Pressure sensitive....grips fast, sticks tight
7 mils thick, high dielectric strength: 1000 volts min
Part
Number
Size
Color
Part
Number
Size
Color
0039001
3/4” x 66’
Blue
0039006
3/4” x 66’
Red
0039002
3/4” x 66’
Brown
0039007
3/4” x 66’
Violet
0039003
3/4” x 66’
Gray
0039008
3/4” x 66’
White
0039004
3/4” x 66’
Green
0039009
3/4” x 66’
Yellow
0039005
3/4” x 66’
Orange
0039010
9 Rolls Assorted Colors
Super 33+ Vinyl Electrical Tape
Part Number
Size
0030933
3/4” x 44’
(10/box)
0030934
3/4” x 66’
(10/box)
Description
·
Premium grade vinyl, 7 mils thick, stickier,
stretchier and highly conformable, flame retardant, hot and cold weather resistant
·
Resists UV rays, abrasion, moisture, acids and
corrosive chemicals
·
High dielectric strength: 600 volts. Cable splices
and wire splices up to 1kV
·
Meets ASTM D-3005 Type 1, UL 510,
HHI-595C and CSA C22.2
Scotchkote Electrical Coating
Part Number
Size
0032100
15 oz. Can
with Brush in Cap
Description
·
Provides a tough, oil resistant outer seal on
electrical insulation subjected to abnormal
weathering, oil or moisture conditions, such as
splices in manholes, underwater cables, etc.
4-21
SHRINK TUBING
Heat Shrink Tubing - Color Coded
·
Waterproof adhesive seal protects electrical connections from deterioration caused by hot oils, gasoline,
dust, solvents, moisture, road salts, and most chemicals.
·
·
Dual wall meltable liner.
Easy to apply; heat splice with heat gun or blazer torch until tubing recovers and adhesive flows.
Part No.
Wire Gauge
Color
Length
0031450
22-18
RED
6"
0031451
16-14
BLUE
6"
0031452
12-10
YELLOW
6"
Sealform Heat Shrinkable Tubing
·
Dual wall flame-retardant polyolefin, includes internal thermoplastic adhesive/sealant
·
When heated tubing will shrink to 33% of supplied diameter (3:1) forcing melted adhesive to flow and seal
the connection.
Sealform provides excellent strain relief and is a superb insulator and environmental seal, resistant to salt
water, automotive fluids and corrosive chemicals
·
Part
Number
Expanded
ID
Color
Suggested
Wire Size Range
(AWG)
Supplied
Length
0031374
1/8
Brown
26 to 22
6"
0031375
3/16
Gray
20 to 12
6"
0031376
1/4
White
16 to 10
6"
0031377
3/8
Red
12 to 8
6"
0031378
½
Blue
8 to 4
6"
0031379
3/4
Yellow
2 to 1/0
6"
Heat Shrink Tubing Thin Wall
·
·
·
·
·
Multi- purpose polyolefin compound
Resists wide range of chemicals, oils, sunlight, moisture
2 to 1 shrink ratio
UL Approved standard 224 - mil-i-23053b/5
Applications : insulation, wire marking, strain relief, bundling
Size
1/8
3/16
1/4
½
3/4
1
Expanded
I.D.
1/8
3/16
1/4
½
3/4
1"
Recovered
I.D.
1/16
3/32
1/8
1/4
3/8
½
Length
25’
25’
25’
25’
25’
25’
4-22
PART
NUMBER
0031380
0031381
0031382
0031383
0031384
0031385
SHRINK TUBING
Heat Shrink Tubing
Heavy Wall With Sealant
·
·
·
Tough cross linked polyolefin protects against abrasion and corrosion
Provides superior strain relief and resistance to vibration
·
·
High shrink ratio (3 to 1)
UL Approved
Sealant is activated by heat (2750OF) while the tubing is being shrunk
Wire
Range
18-14 Ga
18-14 Ga
8-1 Ga
8-1 Ga
2-4/0
2-4/0
4/0-400
Expanded
I.D.
Recovered
I.D.
Length
Color
5/16
5/16
3/4
3/4
1
1
1-1/2
1/8
1/8
1/4
1/4
3/8
3/8
½
6"
6"
6"
6"
6"
6"
6"
Black
Red
Black
Red
Black
Red
Black
Part
Number
0031426
0032426
0031419
0032419
0031420
0032420
0031427
Micro- Jet Torch
Part Number
0031904
Description
·
Piezo electronic self-starting ignition system with
safety lock
·
Wind proof flame and waterproof ignition system
perfect for outdoor use
·
·
·
Flame temperature to 2400 F
o
Rechargeable butane lighter fuel cell
Ideal for electronic, plumbing, automotive, soldering applications
Heat Gun
Part Number
0032000
Description
·
Designed for electrical and electronic bench
work
·
Use to shrink tubing, melt solder preforms, activate & cure adhesives
·
·
·
·
Brushless shaded pole continuous duty motor
High impact plastic housing
3-Wire grounded cord set
Draws only 4.5 AMPS maximum
4-23
WIRE
Cross-link Polyethylene Primary Wire
·
Single conductor, stranded copper wire with thickwall insulation
For automotive use meets SAE J1128-TYPE SXL
·
·
Thermoset insulation provides outstanding durability and abrasion resistance, withstands temperatures up
to 350oF, without melting or fusing
·
Resistant to moisture, grease, oil, acid and most solvents
WIRE
GAUGE
LENGTH
BLACK
RED
WHITE
YELLOW
18
100’
0030201
0030202
0030203
16
100’
0030228
0030229
0030231
0030226
14
100’
0030220
0030222
0030225
0030223
12
100’
0030234
0030235
0030236
0030232
10
100’
0030237
0030238
0030205
BLUE
BROWN
GREEN
0030204
0030239
0030218
0030227
0030240
0030216
0030219
0030241
0030221
0030233
0030242
0030212
0030206
0030243
0030209
General Purpose Primary Wire
·
·
Single conductor annealed copper strands, thermoplastic insulated wire
·
Highly resistant to grease, oils, acids, and diesel fumes
Insulation operates satisfactorily between -30o F and 250o F
Smooth surface makes this wire easy to pull through loom or conduit
Meets SAE J1128-TYPE GPT
·
·
WIRE
GAUGE
LENGTH
BLACK
RED
WHITE
YELLOW
BLUE
BROWN
GREEN
18
100’
0030129
0030131
0030111
0030112
0030128
0030113
0030130
16
100’
0030133
0030135
0030138
0030136
0030132
0030137
0030134
14
100’
0030140
0030142
0030145
0030143
0030139
0030144
0030141
12
100’
0030147
0030149
0030152
0030146
0030148
0030150
0030151
10
100’
0030109
0030155
0030157
0030153
0030154
0030156
0030158
8
100’
0030106
0030108
WIRE
GAUGE
LENGTH
BLACK
RED
WHITE
YELLOW
BLUE
BROWN
GREEN
14
1000’
0030168
0030170
0030173
0030171
0030167
0030172
0030169
16
1000’
0030160
0030162
0030165
0030163
0030159
0030164
0030161
4-24
WIRE
Flat Two Conductor Parallel Wire
·
·
·
Two plastic primary wires laid parallel and covered with a heavy duty extruded oblong pvc gray jacket
Recommended for trucks, buses, tractors, and light duty boats
Resists acid, flame, oil, and moisture
Part Number
Conductor Gauge
Color
0030127
16/2
Black - White
0030125
14/2
Black - White
0030123
12/2
Black - White
0030121
10/2
Black - White
Flat Ribbon
·
Conductors are bonded together for easier installation and handling
·
Manufactured with SAE J1128 TYPE GPT wire
Part
Number
Conductor
Gauge
Color
0030301
16/3
Black - White - Red
0030302
14/3
Black - White - Red
0030303
16/4
Brown - Red - White - Green
0030304
14/4
Brown - Red - White - Green
Battery Cable
·
·
·
·
Soft annealed stranded copper conductors
Durable thermoplastic jacket keeps cable flexible at low temperatures
Resists abrasion, ozone, oil, and road salts
Meets all applicable requirements of SAE J-1127 TYPE SCT
Black
Part Number
Red
Part Number
Gauge
Voltage
Application
0030530
0030535
#6
12
Golf Carts - Marine
0030529
0030534
#4
12
Automotive
0030523
0030522
#2
6/12
Automotive - Light Trucks
0030521
0030520
#1
6/12/24
Farm - School Bus - Trucks To 10 Ton
0030525
0030524
1/0
6/12/24
Med. Duty Trucks - Tractors - Construct Equip
0030526
0030531
2/0
6/12/24
Heavy Duty Trucks
0030527
0030532
3/0
6/12/24
Tractors
0030528
0030533
4/0
6/12/24
Construction Equipment
4-25
WIRE
Multiple Conductor Truck Trailer Cable
ATA COLOR CODE FOR 7- CONDUCTOR CABLE
white ground return to towing vehicle
blackicc required marker and clearance light
yellow left hand directional signal
red stoplights
green right hand directional signal
brown tail lamps, 3 bar marker lamps
blue auxiliary
Part Number
Conductors
Wire Gauge
0030557
7
6-12 Gauge, 1-10 Gauge
0030559
6
14 Gauge
0030558
4
14 Gauge
Pin Connectors
·
·
·
·
·
Improves conductivity
Eliminates crushed splayed wires
Provides strain relief, resists vibration
Funnel entry nylon-insulated with insulation grip
Pin connectors provide excellent mechanical and electrical performance when
secured under a set screw or pressure pad in terminal blocks
Part Number
Wire Range
Color
0036007
16-14
Blue
0036008
12-10
Yellow
4-26
PLUGS/RECEPTACLES
7-Way Plug
·
·
·
·
Meets or exceeds all ATA AND SAE (J560b) standards
Wiring color codes are molded into the plug
Floating pins for ease of alignment
Jumbo finger pull grips and two hang up holes
Part Number
Description
0036014
Standard 7 Way Zinc Die-Cast
0036020
Plug Replacement Interior
0036022
Cable Guard
7-Way Socket
·
Meets and exceeds all rigid anti-skid standards
·
·
Self grounding
Optimum slant mount and drain slot
Part Number
Description
0036016
Standard 7 Way Zinc Die-Cast
0036019
Replacement Socket Interior
6-Way Connectors
·
·
·
·
12-24 Volts, 35 Amp
Compact socket design with exposed terminals
High impact cycolac interiors
Zinc die-cast housing with integral finger grips
Part Number
Description
0036011
6 - Way Plug Zinc Die-Cast
0036012
Plug Replacement Interior
0036022
Cable Guard
0036010
6 - Way Socket Zinc Die-Cast
0036013
Replacement Socket Interior
4-Way Connectors
Part Number
Description
0036006
4 - Way Plug Zinc Die-Cast
0036003
Plug Replacement Interior
0036022
Cable Guard
0036005
4 - Way Socket Zinc Die-Cast
0036004
Replacement Socket Interior
4-27
BATTERY
Battery Terminals & Lugs
·
·
·
·
·
One piece cast copper construction
All terminals are electroplated with tin twice industry standards
25 to 40% higher yoke gives greater contact with battery post
5/16 battery bolts and shoulder nuts included with all clamps
Uniform wall thickness
·
Cable size and polarity are imprinted on terminals
·
Tool die color printed on terminal to simplify identification
Part Number
Cable Size
Post Type
Color Code
0037100
6-4
Universal
Grey
0037103
2
Straight Pos
Green
0037104
2
Straight Neg
Green
0037101
1
Straight Pos
Pink
0037102
1
Straight Neg
Pink
0030420
1/0
Straight Pos
Black
0030431
1/0
Straight Neg
Black
0030490
2/0
Straight Pos
Orange
0030492
2/0
Straight Neg
Orange
0030491
3/0
Straight Pos
Purple
0030493
3/0
Straight Neg
Purple
Flag Barrel Terminals
Part Number
Cable Size
Post Type
Color Code
0030449
1/0
Flag Pos
Black
0030448
1/0
Flag Neg
Black
0030494
2/0
Flag Pos
Orange
0030496
2/0
Flag Neg
Orange
0030495
3/0
Flag Pos
Purple
0030497
3/0
Flag Neg
Purple
Crimping Tool
PART NUMBER
0030500
Description
·
Heavy duty double compound action
head crimps terminals 8 ga to 6/0
·
Easy rotating permanently attached
crimping dies
·
Heavy duty aluminum handles with
cushioned grips
4-28
BATTERY
Butt Connectors
·
·
·
Fully annealed tin plated copper
Seamless butt connectors have flared ends
AWG wire gauge identifications are stamped into barrel
Part Number
Cable Size
Color Code
0037010
6
Grey
0037011
4
Grey
0037012
2
Green
0037013
1
Pink
0030450
1/0
Black
0030451
2/0
Orange
0030452
3/0
Purple
0037017
4/0
Yellow
Copper Lugs
·
·
Fully annealed electrolytic copper construction
·
(AWG) wire gauge identifications are marked on barrels
Unique flared barrel design eliminates wire strand hang -ups
Part Number
Cable Size
Stud Size
0037000
6
1/4
0037001
4
1/4
0037020
4
5/16
0037021
2
5/16
0037002
2
3/8
0037022
1
5/16
0037003
1
3/8
0037004
1/0
3/8
0037005
1/0
½
0037006
2/0
3/8
0037007
2/0
½
0037008
3/0
½
0037009
4/0
½
4-29
BATTERY
Heavy Wall Lugs
·
·
100% copper, tin plated for corrosion resistance
Color code, letter code and cable size stamped on every lug
Part Number
Cable Size
Stud Size
Color Code
0030432
6
1/4
Grey
0030433
6
5/16
Grey
0030434
6
3/8
Grey
0030435
4
1/4
Grey
0030436
4
5/16
Grey
0030437
4
3/8
Grey
0030441
1&2
5/16
Pink
0030439
1&2
3/8
Pink
0030443
1/0
5/16
Black
0030440
1/0
3/8
Black
0030442
2/0
3/8
Orange
0030498
2/0
1/2
Orange
0030444
3/0
3/8
Purple
0030499
3/0
1/2
Purple
Stud/Side Terminal Lugs
·
·
Strong cast copper lugs
Stackable for multiple battery hookups
·
Anti-rotation design lock in 24 positions when stacked
Part Number
Cable Size
Stud Size
Color Code
0030415
1/0
3/8
Black
0030416
2/0
3/8
Orange
0030417
3/0
3/8
Purple
0030418
4/0
3/8
Yellow
4-30
BATTERY
Battery Slugs
Part No
Slug Size
Color
0037030
4 gauge
grey
0037031
2 gauge
green
0037032
1 gauge
pink
0037033
1/0 gauge
black
0037034
2/0 gauge
orange
0037035
3/0 gauge
purple
0037036
4/0 gauge
yellow
0037037
Flux
2 ounce drop bottle
INSTALLATION
Strip the proper size cable so that the exposed cable will reach all the way to the bottom of
the battery terminal and the cable insulation fits snugly against the top.
Place the proper size solder slug into the terminal. Secure the battery terminal in a vise.
Slide the proper size heat shrinkable tubing over the cable. Apply several drops of Flux to
the exposed cable. Insert the exposed cable into the terminal.
Ignite the propane torch, and heat the base of the battery terminal while applying gentle
downward pressure on the cable. Allow the cable to slide into the terminal until the insulation is snug against the top of the terminal.
Slide the heat shrinkable tubing over the connection and apply in direct heat to the tubing.
Economy Crimping Tool
Part Number
Description
0030501
·
Hammer type tool accepts 8 gage - 4/0 gage
uninsulated terminals, butt connectors, battery terminals and lugs
·
·
Crimping guide is imprinted in anvil
Heavy duty steel construction
Copper Cable Cutter
Part Number
0030502
Description
·
Will cut up to 350 MCM copper stranded
electrical cable
·
·
Durable machined steel blades
13" long handles with rubber grips
4-31
BATTERY
Heavy Duty Lead Truck Battery Terminals
·
·
·
Die cast from antimonial reinforced lead
Straps, nuts, and bolts are zinc plated steel
Clamps securely on cable
Part Number
Wire Size
Description
0030870
1 - 4/0 GA
Straight
3- Way Lead Truck Battery Terminal
·
·
3-way feature helps eliminate cable bends
Lead construction with zinc plated steel bolts and nuts
Part Number
Wire Size
Description
0030803
1 - 2/0 GA
Universal
Universal Emergency Lead Terminals
Part Number
Wire Size
Description
0030804
6 - 2/0 GA
Top Post
0030875
6 - 2/0 GA
Side Post
Marine Or Wing Nut Lead Terminal
Part Number
Post Size
0030862
5/16
Military Low Profile Terminal
·
·
·
Solid lead alloy with steel reinforced ring cast inside clamp
All bolts and nuts lead plated
Extra long 3/8" x 2-1/2" bolt connect with copper battery lugs
Part Number
Description
Military Spec
0030876
Positive
MS75004-1
0030877
Negative
MS75004-2
4-32
BATTERY
Top Post To Side Mount Cable Adapter
Part Number
Type
0030867
Positive
0030869
Description
Negative
·
Converts top post battery for use with
side terminal cables
·
All lead construction threaded for 3/8"
side terminals
·
Includes 5/16" hex nut and bolt
Side Mount Post Adapters
Part Number
0030872
Description
·
·
·
1 Positive/1 Negative
Charging post adapters for side terminal battery
Lead terminals with 3/8" plated steel stud
Stud To Post Conversion
Part Number
0030898
Description
·
·
1 Positive/1 Negative
Changes the existing 3/8" threaded stud to a standard
SAE taper post
Metal Post And Terminal Cleaner
Part Number
0030829
Description
·
·
Rust resistant stainless steel brush
Includes protective brush cover
Anti-corrosion Felt Ring
Part Number
Color
0030821
Red
003822
Black
Description
·
Chemically treated to give extra life to
battery terminals
4-33
BATTERY
Replacement Side Terminal Bolts
·
·
Fully threaded, bright zinc plated steel bolt
Recessed groove permits attachment of battery charger or jumper cables
Part Number
Description
0030801
OEM Bolt
0030802
Extended Knurled Bolt
Replacement Bolts / Nuts
·
Fully threaded, plated to resist corrosion
Part Number
Description
0030823
5/16 X 1-1/4
square head bolt & hex nut
0030900
5/16 X1-1/4
square head bolt & shoulder nut
Adapter Bolts and Nuts
·
·
Precision machined from solid brass, includes zinc plated steel nut and washer
Connects power accessories directly to battery
Part Number
Description
Size
0030812
Adapter bolt, side terminal
accessory post for double
power lead
3/8-16 x 1”
Accessory Stud:
5/16-18 x ½”
0030813
Adapter nut, top terminal
accessory post
5/16-18 x 15/16”
Accessory Stud:
5/16-18 x 3/4”
J-Hook Hold Down Bolts
·
Plated rods include new rubber bushings and wing nuts
Part Number
Dia.
Length
0030908
5/16”
8”
0030906
5/16”
10”
4-34
BATTERY
Tangle-free Battery Booster Cables
·
·
·
Fine-stranded all -copper conductors with rubber jacket insure maximum flexibility at sub-zero temperatures.
The twin line construction keeps cables tangle-free.
Heavy duty cables provide quick sure starts.
Part No
Length
Gauge
Type
Clamp
Amps
Clamp
Type
0035999
16ft
6
Rubber
400
Slim Clamp
0036001
12ft
4
Rubber
500
Angle Clamp
0036002
20ft
4
Rubber
500
Angle Clamp
Replacement Jaws
0036000
Fits 4 & 6Gauge
400
Vinyl Clad
0036009
Fits 2 & 4Gauge
500
Epoxy Coated
Select The Right Length
Side-to-side or
front-to-front
hookups
Back-to-front
hookup for
freeway safety
4-35
Back-to-front hookup
for use with trucks,
boats, campers, vans
& recreational vehicles
TEST CLIPS
Test Clips
·
·
·
Cadmium plated steel
Interlocking necks prevent jaw-offset
Copper shunt gives spring complete protection
Part No
Amps
Jaw Opening
Spring
0030816
10
9/16
10 lb
0030818
50
1-3/8
33 lb
Alligator Clips
·
Cadmium plated steel
·
Screw connection
Part No
Description
0030815
Uninsulated
Part No
Description
0030826
Red Insulator
0030827
Black Insulator
4-36
TUBING
Split Convoluted Tubing
·
·
·
Flexible black polyethylene tubing holds wires in position and protects wires from abrasion and crushing
Tubing is split for easy wire insertion
Operating temperature -300 F TO 2000 F
Part No
ID
Length
0030684
1/4
100 ‘ Coil
0030686
3/8
100 ‘ Coil
0030688
½
100 ‘ Coil
0030689
5/8
100 ‘ Coil
0030692
3/4
100 ‘ Coil
0030693
1"
100 ‘ Coil
Wire And Cable Loom
·
·
·
Flexible non-metallic asphalt impregnated
Protects wire and cables from abrasion; protects, brake / oil / fuel lines, from hot exhaust manifolds
Moisture and acid resistant SAE SPEC: J-562
Part No
ID
Length
0030683
3/16
100 ‘ Coil
0030685
5/16
100 ‘ Coil
0030687
7/16
100 ‘ Coil
Nylon Spiral Wrap
·
·
·
Bundles wires, cables, or hoses firmly in place
Allows lead- outs at any point, wires can be re-routed after spiral wrap has been installed
Resists abrasion, solvents, acid and alkalies
Part No
ID
Max Bundle Range
Spool Length
0031340
1/4
3/16 to 1"
100 ft
0031341
3/8
1/4 to 2"
100 ft
0031342
½
3/8 to 3"
100 ft
Clear Plastic Tubing
·
·
·
Flexible, not brittle in cold weather
Complies with ICC regulation 193.28
Resistant to weather and petrochemicals
Part No
1280041
1280051
1280061
1280081
1280101
ID
3/16
1/4
1/4
3/8
½
OD
1/4
5/16
3/8
½
5/8
Spool Length
100 ft
100 ft
100 ft
25 ft
25 ft
4-37
GROMMETS
Open Nylon Grommet
·
Eliminates wire abrasion caused by metal panel cutouts
Part No
Mounting
Hole Dia
Inside
Diameter
Head
Diameter
Overall
Height
Panel
Thickness
0038606
3/8
1/4
15/32
13/32
1/8
0038608
½
3/8
37/64
13/32
1/8
0038614
7/8
11/16
61/64
29/64
1/8
Rubber Grommets
·
Provide protection for primary wire and multiple conductor cables
Part
Number
0038503
0038504
0038515
0038505
0038526
0038506
0038507
0038508
0038509
0038510
0038512
0038514
0038516
Inside
Diameter
Groove
Diameter
Outside
Diameter
Overall
Thickness
3/16
1/4
5/16
5/16
3/8
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
5/16
3/8
7/16
9/16
1/2
5/8
9/16
13/16
13/16
7/8
7/8
1-1/4
1-3/8
7/16
½
9/16
13/16
5/8
7/8
3/4
1-1/16
1-1/16
1-1/8
1-1/8
1-5/8
1-3/4
3/16
7/32
3/16
5/16
1/4
5/16
1/4
5/16
5/16
5/16
9/32
7/16
7/16
4-38
Groove
Width
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
CLAMPS
Insulated Loom Clamps
·
·
·
·
For electrical wire or cable retention, wire harness, brake, tubing and hydraulic lines
Made of zinc plated steel for strength and corrosion resistance
Removable plastic cushion protects against abrasion and provides electrical insulation
Mounting hole is 17/64" for 1/4" screws or bolts
Part No
Closed ID
0030394
0030396
0030398
0033910
0033912
0033916
0033921
1/4
3/8
½
5/8
3/4
1
1-1/4
Mounting OD
Min.
Max
3/16
1/4
3/8
1/2
5/8
3/4
1-1/8
1/4
3/8
1/2
5/8
3/4
1
1-1/4
Vinyl-Coated Steel Clamps
·
·
Made of unbreakable steel
·
1/4" Standard hole size
Heavy vinyl coating for resistance to corrosion
Part No
Closed ID
0033941
0033961
0033981
0033982
1/4
3/8
1/2
5/8
Mounting OD
Min.
Max
3/16
1/4
3/8
1/2
Body Clips
·
·
Ideal for holding primary wire to truck frame
Made from heat treated spring steel with a black corrosion resistant finish
Part No
Size
0031349
Small
0031348
Medium
0033758
Large
4-39
1/4
3/8
1/2
5/8
WIRE TIES
Ty Rap Cable Ties
·
Corrosion resistant stainless steel lock - maintains
the right tension
·
·
Infinitely adjustable design - always the right size
·
Low profile head - looks good won’t snag
Easy to install - won’t slip mechanic’s grip
·
·
Smooth molded body - no notches cut into the tie
that can weaken the tie, won’t cut into cable insulation
Ribbed and stippled back - won’t slip on bundle
Miniature / Intermediate Cable Ties
Part Number
Clear
Part Number
Black
Length
Width
Bundle
Diameter
Loop
Tensile
0031304
0031392
3.6"
.100
1/16-7/8"
30 lb.
0031305
0031393
5.57"
.140
1/16-1-1/4
30 lb
Standard Cable Ties
Part Number
Clear
Part Number
Black
Length
Width
Bundle
Diameter
Loop
Tensile
0031386
0031394
7.34"
.184
1/16 - 1-3/4"
50 lb
0031387
0031395
11.4"
.140
1/16 - 3"
50 lb
0031388
0031396
14.3"
.184
1/16 - 4"
50 lb
Heavy Duty Ties
Part Number
Clear
Part Number
Black
Length
Width
Bundle
Diameter
Loop
Tensile
0031303
0031397
14"
.270
3/16 - 3-1/2"
120 lb
Mounting Ties
Part Number
Clear
Part Number
Black
Length
0031307
0031398
7.75
0031306
14"
14"
1/4
0031391
Mounting
Hole Dia
Width
Bundle
Diameter
#10
.184
1/16 - 1-3/4"
50 lb
#10
.184
1/16 - 4"
50 lb
.184
3/16 - 3-3/12
120 lb
4-40
Loop
Tensile
WIRE TIES
Ty-fast Self Locking Cable Ties
·
·
·
·
The economical way to secure
One-piece all nylon 6/6 construction
Curved tip with finger grips for easier insertion and to assist in pulling cable ties tight
Meets all applicable military specifications
Miniature / Intermediate Cable Ties
Part Number
Bundle
Diameter
Loop
Tensile
Clear
1/16 - 7/8"
18 lb.
Clear
1/16 - 1-1/4
18 lb
Length
Width
Color
0031355
3.6"
.100
0031356
5.57"
.140
0031365
3.6"
.100
Black
1/16 - 7/8"
18 lb
0031366
5.57"
.140
Black
1/16 - 1-1/4
18 lb
Standard Cable Ties
Part
Number
Length
Width
Color
Bundle
Diameter
Loop
Tensile
0031357
7.34"
.184
Clear
1/16 - 1-3/4"
50 lb
0031358
11.4"
.140
Clear
1/16 - 3"
50 lb
0031359
14.3"
.184
Clear
1/16 - 4"
50 lb
0031367
7.34"
.184
Black
1/16 - 1-3/4"
50 lb
0031368
11.4"
.140
Black
1/16 - 3"
50 lb
0031369
14.3"
.184
Black
1/16 - 4"
50 lb
Heavy Duty Ties
Part
Number
Length
Width
Color
Bundle
Diameter
Loop
Tensile
0031371
14"
.300
Black
3/16 - 4-1/16”
120 lb
0031372
24"
.340
Black
3/16 - 7-3/16”
175 lb
0031373
36"
.340
Black
3/16 - 11”
175 lb
Cable Tie Assortment Pack
·
·
·
·
·
Contains 3 of the most popular sizes; 3” (200), 7” (100) and 11” (100) ties
Ties are made of 6/6 nylon for maximum strength and flexibility
Notched for easy pre-tightening assembly
Available in clear or UV resistant black
Refillable compartments stay closed to prevent spillage
Part Number
Color
0031360
Clear
0031370
Black
4-41
WIRE TIES
Four Way Mounting Base
·
·
·
Four way adhesive mounting base
Use with standard intermediate and miniature cable ties
May be screw mounted with # 8 screw
Part No
Size
Color
0036290
1-1/8 x 1-1/8
Natural
Push-Mount Base
·
Snaps into any standard 1/4" predrilled hole
·
·
Stays in place if cable tie must be removed for rewiring
Low profile for areas of limited space
Part No
0036293
Max Tie Size
.184
Max Load
50 lbs.
Panel Thickness
7/64
Masonry and Brick Mounting Base
·
·
·
Made of special impact resistant black nylon
Not affected by ultraviolet light
No adhesives or epoxy required
Part No
0036291
Max Tie Size
.500
Hole in Masonry
3/8"
Adhesive Cable Clips
·
·
Hold wire or cable in place backed with foam adhesive
Supports cable vertically or horizontally
Part No
Max Cable OD
Clip Length
Color
0036156
1/4
1"
Gray
0036157
5/16
1-3/4"
Gray
0036158
3/8
2"
Gray
4-42
WIRE TIES
Double Loop Cable Ties
·
·
Two heads allow double looping
Saves time and the cost of an extra tie
Part No
Length
Width
Max Bundle
0031389
15-1/4
3/16
2" x 2"
0031390
15-1/2
5/16
2" x 2"
Releasable Ties
·
·
Reusable one piece design
Black nylon UV weather resistant
Part No
Length
Width
Tensile
Max Bundle
0031301
5-1/2
9/32
50 lb
1/4" x 1-1/2"
0031302
9-3/4
9/32
50 lb
1/4" x 1-1/2"
Universal Clamp
·
·
·
·
Fasten cables, hoses, or tubing to structural frames in seconds
One- piece design, fast and convenient to use
Eliminates inventory of wire & loom clips, bolts and nuts-lowers costs
Locking grooves maintain tight grip
Part No
0031308
Clamping
Range
1/16 to 2-3/8
Length
Color
9-5/8
Black
Min
Tensile
65 lb
One Piece Mounting Clamp
·
·
·
·
Single piece design reduces installation time
Top cover uses unique fully adjustable ratchet design
Made of light weight nylon classified to UL 94V-2 flammability rating
Combined screw or pressure sensitive adhesive mount, uses #8 screw
Part No
Max Clamping
Thickness
Min Clamping
Thickness
Max
Height
0036294
13/64"
29/64"
7/8
4-43
FUSES
Circuit Breakers
Amps
Part Number
10
5120025
20
5120026
30
5120027
20
5120028
30
5120029
15
5120005
20
5120006
30
5120007
40
5120008
20
5120030
30
5120031
40
5120032
10
5120009
15
5120010
20
5120011
30
5120012
10
0035801
15
0035802
20
0035803
25
0035804
10
0035805
15
0035806
20
0035807
25
0035808
30
0035809
10
0035810
15
0035811
20
0035812
25
0035813
30
0035814
Type
Reset
Tong Style
Glass Fuse Replacement
Automatic
Plug-in Style
ATO/ATC Replacement
Automatic
Post Style
Standard
Automatic
Post Style Horizontal
Mounting Strip
Snap-In
Glass Style Fuses
Automatic
Plug-in Style
Mini Fuses
Automatic
Plug-in Style
ATC Fuses
Automatic
Plug-in Style
Maxi Fuses
4-44
Automatic
FUSES
ATC / ATO Fuses
·
Color coded for quick identification
Amps
Color
Part No.
3
Violet
0035027
4
Pink
0035028
5
Tan
0035029
7-1/2
Brown
0035030
10
Red
0035031
15
Blue
0035032
20
Yellow
0035022
25
Clear
0035025
30
Green
0035026
Mini-Fuse
·
Color coded for quick identification
Amps
Color
Part No.
3
Violet
0035627
4
Pink
0035628
5
Tan
0035629
7-1/2
Brown
0035630
10
Red
0035631
15
Blue
0035632
20
Yellow
0035622
25
Clear
0035625
30
Green
0035626
Maxi-Fuse
·
Color coded for quick identification
Amps
Color
Part No.
20
Yellow
0035720
30
Green
0035730
40
Orange
0035740
50
Red
0035750
60
Lt Blue
0035760
70
Amber
0035770
80
Clear
0035780
4-45
FUSES
Glo-lite Fuses
Is the fuse good? Are you SURE? Not unless you remove it
and look, or get the multi meter out. These fuses allow you to
know at a glance, literally, if the fuse is good or if it's not .
There's no mistakes or guess work, when the LED in the
head of the fuse is lit up, that fuse no longer has a circuit
through it.
Day or Night when a fuse blows the Glo-lite
Fuse indicates immediately which fuse needs
replacing!
·
·
Saves time and effort…locating a blown fuse can be very time consuming with over 100 fuses in newer vehicles
Eliminates guesswork and testing..makes trouble-shooting
a snap, even in the dark! No wasted time looking for additional blown
fuses when you thought there was only one.
Ideal for troublesome circuits where fuses often blow.
·
Easy identification of blown fuses in hard to reach locations.
·
Color-coded fuses instantly let you know the right amperage of the fuse to be replaced
·
·
·
Built to exacting OEM specifications.
Replaces standard fuse styles, available in ATO/ATC, ATM Mini-Fuses
NOTE: Make certain that the key is in the "on" position to verify that the fuse is blown.
·
Part No
Style
Amps
Color
Part No
Style
Amps
Color
0035303
ATM
3
Violet
0035403
ATC
3
Violet
0035305
ATM
5
Orange
0035405
ATC
5
Orange
0035307
ATM
7.5
Brown
0035407
ATC
7.5
Brown
0035310
ATM
10
Red
0035410
ATC
10
Red
0035315
ATM
15
Blue
0035415
ATC
15
Blue
0035320
ATM
20
Yellow
0035420
ATC
20
Yellow
0035325
ATM
25
White
0035425
ATC
25
White
0035330
ATM
30
Green
0035430
ATC
30
Green
1930222
1930224
ATM GLO-LITE ASSORTMENT (80 PCS)
1930223
ATC GLO-LITE ASSORTMENT (80 PCS)
ATC/ATM GLO-LITE ASSORTMENT (160 PCS)
4-45
FUSES
ATC / ATO Fuse Tap-in
Part Number
Size
Type
0035505
1/4” Male Tab
ATC
0035509
1/4” Male Tab
Mini
ATC/ATO Fuse Block
·
Stackable with bolt holes for mounting to stationary object
·
Black nylon construction, includes brass terminals
Part Number
Description
0035506
4 Way Fuse Block
ATC/ATO Fuse Holders
·
·
Holds blade type fuses from 3-30 AMP
IN line mounting using lead wires
Part Number
Amps
Color
Lead Wire
0035507
3-20
Yellow
16 GA
0035508
3-30
Black
12 GA
ATC/ATO Fuse Holder
·
·
·
Self- stripping design requires no wire stripping
Installs with a common plier
For use with 18-16-14 gauge wire
Part Number
Amps
Color
0035500
3-20
Blue
4-47
FUSES
ATC/ATO Fuse Holders
·
·
Deluxe water tight body with water resistant cap.
Manufactured with standard 6” GPT wire.
Part Number
Description
0039642
16 gauge, 10 amp
0039643
12 gauge, 30 amp
Mini Fuse Holder (For Mini Fuses)
·
·
Perfect waterproof fuse holder designed for applications where moisture is a problem.
Cap has positive snap action for tight fit
Part Number
Amps
Lead Wire
0039640
30 amp, 32 volt max.
4”, 12 gauge GPT wire
Maxi Fuse Holder
·
·
Fire wall mounting hole permits 2 or more holders to be mounted together.
Cover comes with a removable strap.
Part Number
Amps
Lead Wire
0039641
20 to 60 amps
5”, 6 gauge GPT Wire
Add- a- Circuit
·
·
·
Plugs into an existing fuse holder
Still protects original circuit, but provides an additional wire lead
Comes with a butt connector installed to wire lead
Part No
Type
0035510
ATC/ATO ADD-A-CIRCUIT
0035511
ATM-MINI FUSE ADD-A-CIRCUIT
4-48
10 Amp Maximum on new circuit
FUSES
Glass Fuses
Part Number
Amps
AGC
1
0035009
2
0035010
3
0035011
4
0035013
5
0035014
6
SFE
AGA
AGW
AGX
GBC
0035007
0035001
0035008
0035002
7-1/2
0035033
0035003
8
0035020
9
0035004
10
0035015
14
0035005
15
0035016
20
0035017
25
0035018
30
0035019
0035034
0035006
0035035
0035021
0035012
Glass Fuse Clip
·
Makes instant connections in fuse block for add-on accessories,
CB’s, tape decks or radios
·
Use in-line fuseholder to protect new accessory
Part Number
Description
0032635
1/4 “ Male Tab
4-48
FUSES
In-Line Fuse Holders
·
·
Nylon twist lock construction allows easy fuse removal and replacement
For all AGC fuses to 30 amps and SFE-20
Part Number
Fuse Size
Mounting
Connection
0030722
Universal
In-line
#14 Lead Wire in Loop
15” Length
0035503
1/4 X 1-1/4"
In-line
#12 Lead Wire in Loop
12” Length
Waterproof Fuse Holder
·
One piece, molded thermoplastic
·
·
High visibiltiy yellow
Fuse holder uses sizes 12 to 18 gauge (not included)
Part Number
Rating
0035502
Rated 30 Amps, 32volts
Adjustable Fuse Holder
·
·
·
·
Simple lead crimp assembly
Fuse holder snap locks together for fuse sizes 1/4" diameter x 7/8", 1" , or 1-1/4" length
Made of high visibility yellow nylon
For use with 12 through 18 gauge wire (Not included)
Part Number
Rating
0035501
Rated To 30 Amps, 32 Volts
Dual Purpose Fuse Puller
Part Number
0035504
Description
·
Pulls and installs both blade type fuses
and glass type fuses
·
Durable single piece design
4-49
SWITCHES
Heavy Duty Toggle Switches
·
·
·
6-24 volt systems, 50 AMP
Posi-touch 1" long bat handles chrome plated
Mounting stem 15/32" diameter
Part Number
Function
Description
5120017
On - Off S.P.S.T
2 Position / 2 Screw Terminals
5120023
Mom On - Off - Mom On S.P.D.T.
3 Position / 3 Screw Terminals
Switch Has Normal Off Position
5120024
Fused 30 Amp On - Off S.P.S.T
Permits Operating 2
Accessories
2 Position / 3 Male Blade
Terminals 1/4" Wide
Regular Service Toggle Switches
·
·
·
·
6 - 24 volt systems, 35 AMP
U.L. listed at 20 AMP. 125V AC., 10 AMP 250V A.C.
15/32" diameter, 3/8" long mounting stem
Knurled face nut, hex back nut
Part Number
Function
Description
5120018
On - Off S.P.S.T
2 Position / 2 Screw Terminals
5120020
On - Off - On S.P.D.T.
3 Position / 3 Screw Terminals
5120019
On - On S.P.S.T
2 Position / 2 Screw Terminals
4-50
SWITCHES
Push Pull Switches
Part Number
Function
5120001
Off - On S.P.S.T
5120003
Off - On- On With
15 Amp Fuse
Description
·
·
·
·
2 Position
·
Mounting stem 5/8" long x 15/32"
diameter
·
·
3 Position
·
·
12 Volt operation
Extra heavy duty
6-28 Volt DC operation - 75 AMPS
Heavy duty die-cast body chrome
plated knob
Fused - push pull switch with
ivory plastic knob
1/2" long , 7/16" diameter,
5 terminals
Auxiliary Switches
Part Number
Function
5120013
Off-Hi-Lo
5120022
Push Type
Momentary-On Start
Switch
Description
·
·
·
·
Universal push-pull 3 position,
·
Mounting stem 7/16", 5/8" long,
ivory plastic handle
·
Rated 60 Amps At 12v, 40 Amps
At 24v
·
All silver contacts for superior conductivity
·
Housing rolled over insulator to
seal out moisture, dust
·
Mounting stem 5/8" long, 5/8" dia.
over all length 1-13/16
Heavy duty truck heater switch,
12 Volt-5 AMPS
2-speed 3 ohm resistor, 2 screw
terminals, bakelite base
4-51
SWITCHES
Axle Switches
Part Number
Description
5120015
·
·
·
·
Two speed heavy duty axle switch
·
3 Female terminals to receive bullet terminals
·
Large red knob
2 Position both on controls
High and low axle ranges
Die-cast body protected with rubber
cover
Automatic Terminal Block Switch
Part Number
Description
5120016
·
·
Controls two speed electric axle shift
Fiber insulator base with o’ring assembled to studs
Sectional Terminal Block
·
Black nylon base six (6) 105o brass male tab terminals
·
·
·
·
Sections snap together, no mounting channel required
#8 or #10 fillister head mounting screw required every 10 blocks
All tabs conform to NEMA standard DC2-1976 & UL 310
Terminal block conforms to NEMA standard ICS 4-1977 and UL 1059
Part
Number
Tab
Size
Rated
Voltage
Rated
Current
5120033
1/4"
300
40 AMPS
4-52
FLASHERS
Heavy Duty Flashers
·
·
·
·
·
Tested, approved, certified to comply with D.O.T. 108, and SAE specifications
Variable load design for extra capacity for trailer towing
Certified for 1 to 6 lamp loads
Will flash 2 to 3 turn signal lamps - 2 to 6 hazard warning lamps
Vane type construction requires less installation space
Part No
Description
0035051
2 terminals 12 volts
0035052
3 terminals 12 volts
Heavy Duty Electronic Flashers
·
Average life 800 hours - 5,000,000 flashes - based on application and usage
·
·
·
Load rating: 25 AMP, 1-10 LAMPS, 12 VOLT
Time to 1st flash: less than 0.75 seconds
Frequency: 60 to 120 flashes per minute
·
·
·
·
·
Designed to conform to DOT 108, SAE, AAMVA and Title 13 California Highway Patrol
Compact size for easier installation in tight spaces
Brass terminals for improved corrosion resistance and better conductivity
Heavier contacts for 15% longer life
Heat resistant black thermoplastic base and tinted cover
Part No
Description
0035053
2 Terminal, 12 Volt Flasher
0035054
3 Terminal, 12 Volt Flasher
4-53
BATTERIES/FLASHLIGHT
Industrial Grade Batteries
·
·
·
·
Alkaline industrial grade batteries provide greater life and more power than zinc-carbon batteries
Formulated to exceed the every day demands of tough industrial applications
Quality construction guaranteed against leakage
Longer storage life, dependable performance
Part No
Description
0039201
“D” Size Cell
0039202
“C” Size Cell
0039203
“AA” Size Cell
0039204
“AAA” Size Cell
0039206
9 Volt
0039207
6 Volt Heavy Duty
Industrial Grade Flashlight
Part Number
0039205
Description
·
·
Deep ribbed tube for sure grip
·
·
·
·
·
High impact plastic lens
Resists grease oil, corrosion and rough
handling
Spare bulb holder
Switch guard
Front and end loading
Ring hanger
4-54
TOOLS
Self Adjusting Stripper & Crimper
Pat Number
0031909
Description
·
·
·
·
Automatically strips wire insulation
Wire range 22 to 10 AWG
Crimps insulated terminals from 22 -10ga
Wire cutter blades cut wire sharp and
smooth
Terminal Crimping Tool
Part Number
0031908
Description
·
·
·
·
·
Made of heat treated alloy steel
·
Cut-off dies for mild steel and non-ferrous
screws
Cushioned vinyl grip handles
Crimping dies for 22-10 AWG terminals
Wire stripping stations for 22-10 AWG
Crimping station and wire cutters are located at the top of the tool
Stripping and Cutting Tool
Part Number
5150250
Description
·
·
·
Cuts with one end, strips with the other
Self-adjusts to wire sizes 24 to 14 AWG
For use on multiple strand primary wires
4-55
CONTACT US
$16 with the purchase of one of the
following assortments:
1930341 Krimp a Seal Terminals
3930341 Krimp a Seal Refill
1930101 Nylon Terminal Assortment
3930101 Nylon Terminal Refill
0031908
MULTI-PURPOSE CRIMP TOOL
Multi-Purpose hand tool that crimps, cuts and strips wire
●
●
●
●
●
●
Crimping, cutting, stripping and rethreading tool
Heat treated steel with padded vinyl handles
Wire cutter is located at tip for easy access
Wire stripper makes a complete cut of wire insulation with one stroke
Cuts, crimps and strips 26 to 10 gauge wire and crips ignition
terminals
Cuts and rethreads 4040, 6-32, 8-32, 10-24 and 10-32 machine
screws
$12 with the purchase of one of the
following assortments:
SELF-IGNITING BUTANE MICRO TORCH
1930341 Krimp a Seal Terminals
3930341 Krimp a Seal Refill
0930161 Sealform HS Tubing
3930161 Sealform HS Tubing Refill
●
●
●
●
●
Butane powered micro torch
Produces flame temperatures up to 2400°F
Hundreds of uses ranging from heat
shrinking to soldering
A must for every tool kit
Self-igniting mechanism with a “lock-on”
feature
0031905
SELF-IGNITING BUTANE CANNISTER TORCH
$26 with the purchase of one of the
following assortments:
●
1930341 Krimp a Seal Terminals
3930341 Krimp a Seal Terminal Refill
0930161 Sealform HS Tubing
3930161 Sealform HS Tubing Refill
1930204 Heavy Wall HS Tubing
1930204 Heavy Wall HS Tubing Refill
●
●
●
●
●
●
●
0031906
Built-in self-igniting system with safety
lock that ensures the switch is not turned
on when not in use
Built-in "refillable" plastic fuel tank
Wide, stable base is perfect for handsfree use
Temperature up to 2500°F/1300°C
2-hour continuous run time for perfect
continuous heat applications
Adjustable flame that will produce a
broad or pinpoint flame
Meets Consumer Products Safety
Commission (CPSC) Child Safety
Requirements
Use to heat materials, ignite materials,
pinpoint torch, shrink tubing, solder and
desolder, terminate specialty connectors
and more
BULBS
Miniature Light Bulbs
·
·
Specifically designed to meet the needs of fleet service
12 volt
Part
Number
Industry Bulb
No.
Figure
No.
Candle
Power
Part
Number
Industry Bulb
No.
Figure
No.
Candle
Power
0035101
53
4
1
0035115
1003
3
15
0035103
57
4
2
0035116
1004
1
15
1034
1
32
0035106
67
4
4
0035117
0035104
89
4
6
0035118
1073
3
32
1141
3
21
0035105
90
13
6
0035120
0035128
97
4
4
0035121
1154
1
32
1156
3
32
1
32
0035129
158
2
2
0035122
0035139
168
2
3
0035123
1157
0035110
194
2
2
0035124
1157A
1
-
1176
1
32
0035130
194A
2
-
0035125
0035111
198
1
32
0035138
1893
5
2
1895
4
2
0035112
199
3
32
0035126
0035113
211-2
6
12
0035131
2057
1
32
2057A
1
32
7
32
0035114
293
4
2
0035132
0035140
561
12
12
0035133
3057
0035141
906
2
6
0035134
3057NA
7
24
3156
7
32
0035142
912
10
12
0035135
0035143
921
10
21
0035136
3157
7
32
0035137
3157NA
7
24
4-56
BULBS
Tuff-skin Safety Bulbs
·
·
·
·
·
Shatterproof - silicone safety coating resists bulb breakage from thermal shock and impact when dropped
Multiple filament supports - provides maximum vibration protection withstands power surges
4,000 hour average life
Brass base - prevents socket corrosion
130 Volt rating, UL listed
Part No
Watts
Volts
0035203
75
120
0035204
100
120
Rough Service Bulbs
·
Reinforced filament supports - provide resistance to shock and vibration
·
·
·
3,500 hours average life
Brass base prevents socket corrosion
130 Volt rating, UL listed
Watts
Volts
Part No.
Unit
50
120
0035200
12
75
120
0035201
12
100
120
0035202
12
4-57
Work Lights
Stubby II Rough Service
Fluorescent Work Light
• 13 watt rough service fluorescent bulb
•
•
•
•
illuminates with over 75 watts of light
Clear outer tube with end light
magnifier shines like a flashlight
Cool Operation
Safe for use around flammable liquids
High impact, shock resistant industrial
design
Made in U.S.A
Part No
Description
5141300
STUBBY II WITH 1' CORD
5141325
STUBBY II WITH 25' CORD
5141340
STUBBY II WITH 40' REEL
5141350
STUBBY II WITH 50' CORD
5141395
STUBBY II HEAD KIT ONLY
5141394
MAGNETIC MOUNT
5141393
13 WATT ROUGH SERVICE BULB
WORK LIGHTS
Retractable Cord Reel Work Light
3 Conductor SVT, 300 volts grounding
·
Complete with all hardware for easy wall or ceiling mounting in workshop
or garage. Work light has safety grounded metal lamp guard and includes
switch and side outlet.
Part No
Length
AWG
AMPS
WATTS
COLOR
5140583
20 Ft
18/3
7
875
Orange
Fluorescent Work light Retractable Reels
2 Conductor SVT
·
Energy saving and cool burning with convenient plug -in ballast
Part No
Length
AWG
AMPS
WATTS
COLOR
5140584
20 Ft
18/2
7
875
Yellow
Plastic Guard Work Lights
3 Conductor SJT, 300 volts grounding with switch & receptacle
Part No
Length
AWG
AMPS
WATTS
COLOR
5140306
50 Ft
16/3
13
1625
Orange
Metal Guard Work Lights
3 Conductor SJT, 300 volts grounding
Part No
Length
AWG
AMPS
WATTS
COLOR
5140307
25 Ft
14/3
15
1875
Yellow
5140308
50 Ft
14/3
15
1875
Yellow
Fluorescent Work Lights
3 Conductor SJT, grounded with switch and receptacle
Part No
Length
AWG
AMPS
WATTS
COLOR
5140310
15 Ft
18/3
10
1250
Black
4-58
CORD, PLUGS & SWITCHES
4-59
CORD, PLUGS & SWITCHES
All-Weather Extension Cords
3 Conductor SJEOW, 300 volts Grounding
Arctic Blue TM all weather TPE- Rubber Extension Cords are designed for use by
contractors and industrial personnel, providing an all weather cord set made for
outstanding performance at temperatures from -58 o F to 221o F. One-third lighter
than ordinary cords, Arctic Blue TPE-rubber cords provide superior resistance to
sunlight, ozone, cracking oils and chemicals and are outstanding in resistance to
abuse, rough handling and wear
Part No
Length
AWG
Amps
Watts
0030570
25 ft
14/3
15
1875
0030571
50 ft
14/3
15
1875
0030572
100 ft
12/3
15
1875
All-Weather Triple Tap
3 Conductor SJEOW, 300 Volts Grounding
Part No
Length
AWG
Amps
Watts
0030574
25 ft
12/3
15
1875
0030573
50 ft
12/3
15
1875
Shock Safe In-line G.F.C.I. Lighted-End Outdoor Cords
Molded-on and bonded vinyl plugs and connectors, in-line mechanical G.F.C.I.
Centrally placed along the cord, and test and reset buttons.
Part No
Length
AWG
AMPS
WATTS
COLOR
5140585
3 Ft
12/3
15
1875
Yellow
Portable Cord Reel
Provides tangle-free portable storage for extension cords
Part No
Color
5140580
Black
Cord Winder
Provides tangle-free storage for extension cords in a compact heavy duty frame.
Part No
Color
5140581
Black
4-60
CORD, PLUGS & SWITCHES
Outdoor Portable Power Cord
·
·
·
Vinyl Jacketed 2 & 3 Conductor SJTW, 300 volts grounding
Designed for heavy duty service, portable tools, small motor and power extensions.
UL listed, OSHA acceptable
Part No
Length
AWG
VOLTS
COLOR
0030553
50 Ft
16/2
300
Black
0030540
50 Ft
16/3
300
Black
0030541
50 Ft
14/3
300
Black
0030542
50 Ft
12/3
600
Black
Standard Duty Black Rubber Wiring Devices
Part No
NEMA No
Rating
Description
Cord
Dia.
1540002
5-15R
15A - 125V
Connector
U-Ground-Black
.25 - .60
1540001
5-15P
15A - 125V
Plug U-Ground-Black
.25 - .60
Add-A-Cord Plug
Part No
1540586
Description
·
·
·
·
·
3-prong grounded 3-way convenience plug
Heavy duty injection molded plug
Ideal product when circuits are scarce
Wide variety of uses
Easy to use
4-61
CORD, PLUGS & SWITCHES
Hospital Grade High Abuse Grounding Receptacles
·
·
·
·
·
·
All devices are UL listed, meet FED. SPEC - WC-596E
Green dot on face, housing is constructed of high impact resistant lexan
Unique one piece construction grounding strip
Break off fins for easy two circuit conversion
Large head brass terminal screws backed out and staked
Use only copper or copper clad wire with these devices
Part Number
Color
Description
Rating
1540017
Ivory
Duplex
15A-125V
5-15R
1540018
Red
Duplex
Emergency
15A-125V
5-15R
Hospital Grade Plugs & Connectors
·
·
Compact design with clear lexan husk permits wiring connections to be seen
·
·
NEMA number and rating on face
I- bean cord clamps accommodate all wire sizes
·
Speed screws for easy assembly
Individual wire compartments with pressure terminal clamps for easy wiring
Part Number
Description
Rating
1540030
Plug
15A-125V
NEMA 5-15P
1540031
Connector
15A-125V
NEMA 5-15P
1540032
Plug
20A-125V
NEMA5-20P
Kwiklok Plugs & Connectors
·
·
KWIKLOK cord grip has no screw or plates to take apart and put back, simply insert cord into the end and
turn the cap locking and sealing the cord into place
UL approved and C.S.A. approved, yellow nylon dead front construction completely shockproof
Part Number
Cord
Range
Description
Rating
1540003
#18/3 TO #10/3
Plug
15A-125V 5-15P
1540004
#18/3 TO #10/3
Connector
15A-125V 5-15P
4-62
CORD, PLUGS & SWITCHES
Industrial Heavy Duty Grounding Toggles
·
·
·
·
·
·
Supplied with both screw and E-Z wire pressure terminals for fast installation
Large head screws staked and backed out take up to # 10 wire
Back pressure terminals take #12 or #14 solid copper wire
Steel strap riveted to 2 piece completely enclosed housing
15A, 120-277V AC, 1/2 HP-120V AC, 2HP -240V AC
Use only copper or copper clad wire with these devices
Part Number
Color
Description
Rating
1540015
Brown
Single Pole
15A-120V-277V
1540016
Ivory
Single Pole
15A-120V-277V
Industrial Straight Blade Grounding Receptacle
·
·
Supplied with both side screws and back E-Z wire pressure terminals
·
·
All power contacts are double wipe
Mounting strap goes through the receptacle body for extra strength
·
·
15A, 125 VOLT - NEMA 5-15R
Use only copper or copper clad wire with these devices
E-Z wire terminals take #12 or #14 wire, side screw takes #10.
Part Number
Color
Description
Rating
1540013
Brown
Duplex
2-Pole 3-Wire
15A-120V
1540014
Ivory
Duplex
2-Pole 3-Wire
15A-120V
Lexan Wall Plates
·
High impact construction resists chipping, cracking will not conduct electricity
Part Number
Description
Color
1540022
Switch Plate
Brown
1540023
Switch Plate
Ivory
1540020
Receptacle Plate
Brown
1540021
Receptacle Plate
Ivory
4-63
WIRE NUTS
Ranger Wire Nuts
·
·
·
·
·
Tough nylon construction
Wing design makes assembly fast and easy
UL listed under STANDARD 467 for use as grounding connectors
Live spring action gives vibration resistant connections
Deep skirt allows insulation to reach further into the connector
Part No
Color
22
20
18
16
14
12
10
8
0031400
Yellow
5-7
3-6
2-6
1-4
1-4
1-3
1
1
0031399
Red
4-10
2-10
2-7
1-6
1-5
1-3
1-2
Scotchlok 2 Wire Connectors
·
·
·
·
Grips quicker pulls on faster, for a solid secure connection every time.
Unique spring design expands to accept a wide range of wire sizes.
·
Rounded wings make the connector easier to grip and provide maximum torque
·
UL LISTED 600 Volts Max Building Wire 1000 Volts Max signs
Large throat design and extended skirt allow just three sizes to cover the entire 600 volt wire range.
The long skirt provides flexible protection for conductors but bends readily & conforms to take up less room
Part Number
Color
Stranded Or Solid
0031460
Org/Blue
2 #22 - 2 #12
0031461
Red/Yel
2 #18 - 2 # 8
0031462
Blue/Gray
4 #14 - 5 #10
Vinyl Scotchlok Wire Nuts
·
·
·
·
Flexible compact fully insulated connection
Torque fins for secure grip and fast installation
Deep skirt allows insulation to reach further into the connector
UL LISTED 600 Volts Max Building Wire 1000 Volts Max signs
Part Number
Color
AWG
0031401
Blue
12-6
0031402
Grey
14-8
0031403
Red
16-10
0031404
Yellow
18-12
4-64
WIRE NUTS
Twist Lock Wire Nuts
·
·
Requires no pre-twisting
UL & C.S.A. Listed
Part Number
Color
Stranded AWG
Volts
1540005
Grey
22-16
300
1540006
Blue
22-14
300
1540007
Orange
22-14
600
1540008
Yellow
18-10
600
1540009
Red
18-10
600
4-65
CIRCUIT TESTERS
Ultimate AC Sensor
Traces electrical circuits, prevents shock
Part Number
0031900
Description
·
·
·
·
·
·
·
·
·
Detects 50-600 VOLTS A.C.
Probe glows cherry red in presence of A.C. voltage
Sounds audible beep if AC voltage is present
Senses electromagnetic field through insulation
No contact with conductor wire required
No ON/OFF switch therefore it is alwarys ready to use.
Will not beep when it comes in contact with a static field.
Energizer alkaline batteries included
UL listed
DC Voltage Detector
Part Number
0031901
Description
·
·
Detects 6-50 Volts DC current
·
·
Pen sized unit easy to handle and store
·
Sharp rust proof stainless steel tip penetrates heavy wire
easily
·
·
20 gauge heavy duty heat resistant test lead wire
If DC current is present, LED light will glow red and a
buzzing sound will be emitted by the DC detector.
Large clip fits both large and small ground connection
points
Ideal for Automotive, Marine, Telecommunications, Aviation, Farm Equipment, Industrial Controls, Heavy equipment, Trucks & RV’s and any other 6-50 Volt DC System
Scotchcode Wire Marker
·
·
·
Compact easy to use
Convenient rolls - precise cutoff no waste
Refillable
Part Number
Description
Marker Numbers
0039100
Unit With
#0-9
0039105
Refill
#0-4
0039109
Refill
#5-9
4-66
DUAL-LOK
Dual-Lok Recloseable Fasteners
·
·
·
·
·
·
5 times stronger than conventional Velcro type products
Adhesive backing adheres instantly to most surfaces
Press to close, peel or pull to open
Replaces other mechanical fasteners such as clips, snaps, and small screws
Fasteners do not require precise alignment
Cycle life exceeds 1000 closures
Part Number
Description
Color
Size
Disengagement
Strength
0033560
Very high bond
Clear
2 Rolls 1" x 14.7 Ft
38 lb / sq in
0033541
General Purpose
Black
2 Rolls 1" x 14.7 Ft
50 lb / sq in
Dual-lok Discs
·
·
·
Can be attached with pop rivets or screws
Recessed holes for mechanical attachment
Will work in temperatures up to 200o F
Part Number
Description
Size
0033542
Black
13/16 Dia
Scotch Cable and Wire Tie Wrap
·
·
·
·
For temporary and permanent applications
Incorporates flexibility, a thin profile, and superior strength for a unique cable bundling, wire harnessing and
fastening system
Secures quickly and easily, remains locked without slipping and can be reused for maximum efficiency.
Excellent for wire bundling, cable fastening, fiber optic installations, securing electrical and electronic components and a variety of applications, permanent or temporary
Product Number
Size
Description
0039632
3/8”
Perforated 8” - 75 pieces
0039634
1/2”
Perforated 8” - 75 pieces
0039635
Dispenser for 3/8” and 1/2” Roll
4-67
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising