Elematic - Cable ties Accessories

Elematic - Cable ties Accessories
CABLE TIES & ACCESSORIES
...max capacity!
Elematic Cabling Systems, with a production of cable ties
all the year, 24 hours a day, 7 days a week is one of the
worldwide top producers of polyamide cable ties.
A certified system (ISO 9001:2008), conformed to
European Standards, guarantees the application of severe quality parameters on all stages, from the design to
the production and after-sales service.
CABLE TIES & ACCESSORIES
CABLE TIES & ACCESSORIES
HOW TO CHOOSE
A CABLE TIE
How to choose the right cable tie
The most important characteristics of a cable tie are:
• the raw-material they are made of (weather, chemicals and heat resistance)
• the tensile strength they can stand (tear strength)
• the min and max diameter they can bundle
• the shape of the tie in case of particular applications
• the flammability rating
Hereby a few suggestions on how to choose the right cable tie for your
application.
Resistance to chemical agents
Chemical agents as powders, liquids or gases can deteriorate the raw material
cable tie are made of, or extract some components from the plastic compound. The
mechanical properties of the cable tie can deteriorate as a consequence of the
interaction with several compounds. In this case the performance of the product
could not meet the required standards.
UV and weather resistant cable ties
All polymers including the polyamides used for the production of cable ties are
sensitive to UV radiation.
The most common additive used for protecting polyamides from UV radiation is
carbon powder commonly known as “carbon black”.
Natural Cable Ties (Elematic codes 52xx) have low resistance to UV
radiation and therefore are not suggested for outdoor applications.
Black Cable Ties (Elematic codes 53xx) are additivated with carbon black.
They have improved weather and UV radiation resistance and are better suitable
for outdoor applications, but this is not enough to protect the material from the
damage due to the UV-radiation for a long time. For these needs the weather
resistance cable ties could be used.
Tests performed in should labs give for black cable ties a resistance till 150 hours
QUV-B radiation following ISO 4892 norm. This can be compared to ca. 3 years
outdoor resistance on average exposure to South-European areas.
We underline that particular environmental situations as combination of exposure
to chemical agents and UV radiation, exposure to very warm, humid and sunny
weather, etc., can change dramatically the performance of the product. Our
indications should therefore be used only as a reference. In case of specific
needs, please contact our technical department.
Weather Resistant Cable Ties (Elematic codes 53xx UV) are made of
a specially additivated compound to provide an extra weather resistance so that
they are optional for outdoor applications.
Tests performed in recommended labs give for weather resistant cable ties a
resistance till 600 hours of QUV-B radiation following ISO 4892 norm. This can
be compared to ca. 10 years outdoor resistance on average exposure to SouthEuropean areas.
12
HOW TO CHOOSE
A CABLE TIE
Heat resistance and self-extinguishing cable ties
All polymers including also polyamides used for the production of cable ties
are sensitive to high temperatures.
Exposure to high temperatures can break the chemical bonds of the
polymer causing degradation and loss of mechanical resistance.
Polyamide products can therefore become fragile and sensitive to
vibrations.
The max suggested installation temperature for standard cable ties is
60°C, while the max service temperature for continuous use is 85°C.
Heat Resistance Cable Ties (Elematic codes 53xx T) are made of
a specially additivated compound to provide an extra heat resistance
(max service temperature for continuous use up to 125°C).
Polymers are also sensitive to low temperatures. Application of
polyamide 6.6 cable ties is possible till around -10°C. Standard
polyamide becomes very brittle at temperatures below -40°C (min.
suggested service temperature for continuous use).
Heavy-duty Cable Ties (Elematic “Belturing Plus” range) provide
an extra resistance to cold temperature (installation possible till -30°C)
and an excellent resistance to UV radiation, therefore they are
suggested also for external applications and long term exposure under
the sunlight and UV action.
Self-extinguishing cable ties (Elematic codes 52xx V0) are
made of polyamide 6.6 with additives that gives the auto extinguishing
performance; the halogen and phosphorus free material avoids toxic
emission in event of fire and conforms to UL-94 V0 and GW 960 °C
standards.
Tear resistance
The tear resistance is the most important parameter for choosing the
right cable tie for a specific application.
The technical data sheets of Elematic cable ties give the minimum
guaranteed tear resistance for all sizes.
Elematic cable ties are tested following the main international standards
as EN 50146 and IEC 62275 using dedicated equipment and with a
constant rate of 25 mm/min.
The strength causing the collapse of the cable tie is given in Newton (N).
The standard testing conditions are 23°C and 50% of relative humidity.
It is important to underline that the values arising from those laboratory
tests may not be representative of the resistance to the loads of real
installations, due to the presence of external factors (high humidity,
vibrations, high temperatures, etc.).
We therefore suggest to apply a safety factor of at least 2. This safety
factor should be chosen depending on the application conditions.
In case of severe working conditions, at high temperatures, high
humidity, vibrations… this safety factor should be increased up to 5.
General indications for cable ties installation (2,2-4,8 mm)
Cable Ties width (mm)
Tool setting (daN)*
2,2
2,5÷2,6
3,6
4,5÷4,8
0<daN<3
3<daN<6
6<daN<10
10<daN<13
*1 daN 1kg
For more details concerning specific requirements, please ask our
technical department.
13
HOW TO CHOOSE
A CABLE TIE
Flammability rating of Cable Ties
The UL 94 test (flammability of plastic materials for parts in devices and
appliances) enables to compare plastic materials in terms of their burning
behaviour. It gives indication either on the relative speed of burning, or on the
ability to extinguish or not to propagate fire.
The classification starts with the lowest level HB till the highest V0
(best self-extinguishing value).
HB (Horizontal Burning) - Test description
Sample size
125 ± 5 x 13 ± 0.5 mm
Thickness
0.8; 1.6; 3.2; 6 mm
Bar having marked lines at 25 and 100 mm from its end
Pre-treatment
48 hours / 23 ± 2 °C / 50 ± 5% RH
Burner
Bunsen Ø 9.5 mm 100 mm length
Flame height
20 ± 1 mm
Contact time
30 s
The material is classified HB if the burn rate measured between the 2 marks,
does not exceed:
38.1 mm/min for 3.2 mm testbar thickness;
63.5 mm/min for <3.2 mm testbar thickness;
In both cases the testbar should stop burning before reaching the 100 mm mark.
VO-V1-V2 (Vertical Burning) - Test description
Sample size
125 ± 5 x 13 ± 0.5 mm
Thickness
0.8; 1.6; 3.2; 6 mm
Pre-treatment
One set of 5 testbar conditioned for 48 hours / 23 ± 2 °C / 50 ± 5% RH;
One set of 5 testbar conditioned for 168 hours at 70 ± 1 °C
Burner
Bunsen Ø 9.5 mm 100 mm length
Flame height
20 ± 1 mm
Number of flame applications
2 x 10 s
A flame is applied 2 times on 5 testbars obtaining 10 values per set of testbars.
Two sets of sample, differently conditioned are tested for a total of 20 values.
Classification
V0
V1
V2
Maximum burning time single specimen (s)
≤ 10
≤ 30
≤ 30
Maximum burning time total of 5 specimens (s)
≤ 50
≤ 250
≤ 250
Afterflame plus afterglow time for each individual specimen after the second flame application (s)
≤ 30
≤ 60
≤ 60
Afterflame or afterglow of any specimen up to the holding clamp
No
No
Yes
Cotton indicator ignited by flaming particles or drops
No
No
Yes
All standard Elematic polyamide 6.6 cable ties are made of UL 94-V2 classified
raw material.
Coloured masterbatches are compliant to RoHS directive and are there fore
prepared without Lead, Chrome or Cadmium, due to this reason colour can
slightly change depending on moulding condition.
14
Special Cable Ties (Elematic codes 52xx V0 are made of a specially additivated compound
to provide an extra self-extinguishing power (UL 94-V0).
R E S I S TA N C E T O C H E M I C A L A G E N T S
O F P O L YA M I D E 6 . 6
Chemical
Agent
Agent
Conc.
Conc.
%
Acetaldheyde - aqueous solution
40
Acetamide - aqueous solution
50
Acetic acid - aqueous solution
10
Acetic acid - concentrated
Acetic anhydride - concentrated
Acetone
100
Acrylonitrile
100
Aluminium chloride - aqueous solution
10
Aluminium sulphate - aqueous solution
10
Ammonia
10
Ammonia - gaseous
Ammonium chloride - aqueous solution
10
Amyl acetate
100
Amyl alcohol
100
Aniline
100
Barium chloride - aqueous solution
10
Benzaldehyde
100
Benzoic acid - aqueous solution
saturated
Benzol
100
Benzyl alcohol
100
Bitumen
Boric acid - aqueous solution
10
Butane
Butyl acetate
100
Butyl alcohol
100
Butyric acid
100
Calcium chloride - aqueous solution
20
Calcium chloride - aqueous solution
10
Camphor
100
Chlorine - gaseous
100
Chlorine water
Chlorobenzene
Chlorobromomethane
Chloroform
100
Chromic acid - aqueous solution
10
Chromic acid - aqueous solution
1
Citric acid - aqueous solution
10
Cyclohexane
100
Cyclohexanol
100
Decaline
Diacetone alcohol
Ethyl acetate
100
Ethyl alcohol
96
Ethyl chloride
100
Butyl phthalate
Carbon sulphide
100
Carbon tetrachloride
Caustic potash - aqueous solution
5
Caustic potash - aqueous solution
50
Caustic potash - aqueous solution
10
Caustic soda - aqueous solution
5
Caustic soda - aqueous solution
50
Caustic soda - aqueous solution
10
Copper salts - aqueous solution
10
Copper sulphate - aqueous solution
10
Dichlorofluoroethylene
Diethanolamine
Dimethylformamide
100
Ethyl ether
100
Ethyl glycol
Formaldehyde - aqueous solution
30
Formamide
Heptane
Hexane
Hydrogen sulphyde - aqueous solution saturated
Isooctane
% Resist.
Resist.
D
G
P
P
S
G
G
G
G
G
L
G
G
G
D
G
L
D
G
L
D
D
G
G
D
D
S
G
G
P
D
G
D
P
P
D
L
G
G
G
G
G
D
D
G
G
G
G
D
G
G
D
G
G
G
G
G
G
G
G
G
D
G
D
P
G
G= Good resistance without noticeable variations in weight and/or volume
D= Discrete resistance with significant variations in weight and/or volume
resulting from prolonged contact.
Chemical
Agent
Agent
Lead stearate
Magnesium hydroxide
Magnesium salts - aqueous solution
Mercury
Methylethylketon
Ferric Chloride - aqueous solution
Formic acid - aqueous solution
Formic acid - aqueous solution
Glycol butylene
Hydrochloric acid - aqueous solution
Hydrochloric acid - aqueous solution
Hydrochloric acid - aqueous solution
Hydrogen peroxide - aqueous solution
Hydrogen peroxide - aqueous solution
Hydrogen peroxide - aqueous solution
Hydrogen peroxide - aqueous solution
Isopropyl alcohol
Lactic Acid - aqueous solution
Lactic Acid - aqueous solution
Lead acetate - aqueous solution
Magnesium chloride - aqueous solution
Mercuric chloride - aqueous solution
Methyl acetate
Methyl alcohol
Methyl chloride
Nitric acid
Oleic acid
Oxalic acid - aqueous solution
Petrol
Phosphoric acid - aqueous solution
Phthalic acid - aqueous solution saturated
Potassium bichromate - aqueous solution
Potassium bromide - aqueous solution
Potassium carbonate
Propyl alcohol
Salicylic acid
Sodium bromide - aqueous solution
Sodium carbonate - aqueous solution
Sodium chloride - aqueous solution
Sodium disulphate - aqueous solution
Sulphuric acid - concentrated
Sulphuric acid - aqueous solution
Sulphuric acid - aqueous solution
Tartaric acid
Tartaric acid - aqueous solution
Thionyl chloride
Vinyl chloride
Water (sea, river, potable, distilled)
Zinc chloride
Methyl-isobutylketon
Mineral oil
Naphtha solvent
Nitrobenzol
Nitromethane
Octyl phthalate
Ozone
Perchloroethylene
Phenol - aqueous solution
Potassium nitrate - aqueous solution
Sodium hypochlorite - aqueous solution
Sodium nitrate - aqueous solution
Sodium nitrate - aqueous solution
Sodium phosphate - aqueous solution
Sodium sulphate - aqueous solution
Trichloroethylene
Zinc oxide
Conc.
Conc.
%
100
10
10
10
85
10
100
36
10
2
30
3
1
0,5
90
10
10
10
6
100
100
100
100
10
10
5
10
100
100
10
10
10
10
98
10
2
10
100
10
100
100
10
5
10
10
10
% Resist.
Resist.
G
G
G
G
G
G
S
P
D
S
P
L
P
P
P
L
D
P
D
D
G
P
G
D
L
P
G
D
G
P
D
D
D
G
D
G
D
G
G
G
S
P
L
D
G
P
G
G
D
G
G
G
D
D
G
P
P
S
G
G
P
G
G
G
D
G
L= Limited resistance: It is possible to use the material in case of short contact.
P= Poor resistance; the material is strongly attacked.
S= Soluble
15
U S E A N D I N S TA L L AT I O N
OF CABLE TIES
MANUAL INSTALLATION OF STANDARD CABLE TIES
Insert the tip of the tie.
Tighten manually the tie till
complete fixing of the cables.
Avoid sharp bending of the tie:
it will not improve the fixing
strength.
Cut the exceeding part of the tie,
with a few mm of safety length.
TOOL INSTALLATION OF STANDARD CABLE TIES
Set the max tension of the tool
depending on the size of the tie.
Grip the tie with the tool.
Tighten the tie till complete fixing
of the cables.
Cut the exceeding part
of the tie.
TOOL INSTALLATION OF BELTURING CABLE TIES
Insert the tip of the tie and tighten
a short segment.
16
Use the tool for tightening the tie
around the cables.
Tighten the tie till complete
fixing of the cables.
Cut the exceeding part of the tie
with the tool, leaving at least one
centimeter of safety length.
QUALITY SYSTEM
Quality System
ISO 9001:2008
The company is certified ISO 9001:2008 for the design and manufacturing of
cable ties and fixing systems with engineering polymers. Trading of fixing,
cabling systems and electrical power tools. This certification guarantees that all
the steps of our company processes, from development to delivery, are
controlled following detailed procedures.
ISO 14001:2004
The company has obtained ISO 14001:2004 certification for the activity:
design and manufacturing of cable ties and fixing systems with engineering
polymers through injection moulding process. Trading of fixing and cabling
accessories.
Voluntary product certifications through international approval
societies
UL – File E86244
Elematic Cable Ties are recognized by the Underwriters Laboratories Inc.
following the norm UL 1565 “Wire positioning devices” for the continuous use
at a max temperature of 85°C.
R.I.Na. Certificate ELE158207CS
Italian Naval Register omologation following the norm IEC EN 60092-101
“Electrical installation in ship”.
GL Germanisches Lloyd certificate Nr. 99 332 – 97 HH
Certifies the mechanical properties and the flame resistance of the Elematic
cable ties.
DNV - File E6996
Guarantees that the Elematic cable ties comply the “Det Norske Veritas“
standards for the securing of cables in the naval constructions and offshore,
for indoor and outdoor installations.
LLOYD’S REGISTER – Type Approval Certificate N° 09/00025
Certifies the mechanical properties and the flame resistance of Elematic
cable ties in the shipbuilding and offshore applications.
BUREAU VERITAS - Certificate n° 13190/B1 BV
This homologation, according to IEC 60092 – EN 50146 normative,
assures that Elematic Cable Ties are made in accordance to “Bureau
Veritas” standards for the fixing cables in shipbuilding.
Self declarations
CE marking
Elematic certifies the conformity of its cable ties to the European instruction
73/23/CEE and following modification 93/68/CEE.
CEI EN 50146 - CEI - IEC 62275
Elematic cable ties are internally tested following the European Norm “Cable
Ties for Electrical Installation“. The results are in accordance with the
requirements of the regulation.
RoHS - WEEE - ELV
Material used for Elematic cable ties & Accessories are compliant to European
directives regarding:
• RoHS - restriction on hazardous substances (2002/95/CE),
• WEEE - waste of Electrical and Electronic Equipment (2002/96/CE),
• ELV - life vehicles (2000/53/CE).
REACH (2006/1907/CE)
In our products there are no substances in the “Candidate list of authorization”
published in October 2008 and updated on 13th January 2010.
17
WIRING SYSTEMS-INDEX
CABLE TIES & ACCESSORIES
POLYAMIDE 6.6 STANDARD CABLE TIES
COLSPEED - BELTURING PLUS CABLE TIES
Page
20
23 - 24
COLSTEEL CABLE TIES
26
SPECIAL CABLE TIES
28
CABLE TIES ACCESSORIES
31
FIXING ACCESSORIES
37
NYLON, POLYESTER AND FIBREGLASS DUCT RODS
46
CABLE CONNECTORS
TERMINAL BLOCKS
56
PREINSULATED COPPER TERMINALS
62
TWIN TERMINALS - COPPER TERMINALS
65
INSULATED CRIMPING TERMINALS
68
HEAT SHRINKABLE BUTT CONNECTOR
74
COPPER LUGS
75
CABLE PROTECTION
WIRING SPIRALS
80
BRAIDED SLEEVES
81
PVC TUBING SLEEVES
84
HEAT SHRINKABLE TUBING
86
NEOPRENE SLEEVES
113
ELECTRICAL INSULATION TAPES
114
CABLING TOOLS
18
TOOLS FOR CABLE TIES
120
CRIMPING TOOLS
118
TOOLS FOR TERMINALS
122
CABLE STRIPPERS AND CUTTERS
127
T E C H N I C A L PA R A M E T E R S
TECHNICAL PARAMETERS
OF RAW MATERIALS
Material
Working
Colour
temperature
UL-rating
Moisture absorption
Characteristics
flame
23°C 50% U.R.*
Saturation
Polyamide 6.6
-40°C ÷ 85°C
natural / black
UL 94-V2
2,7%
8,5%
Polyamide 6.6 injection moulding grade.
Good resistance to bases, oils, greases,
fuel, oil derivates.
Polyamide 6.6
Heat stabilized 6.6
-40°C ÷ 125°C
natural / black
UL 94-V2
2,7%
8,5%
Polyamide 6.6 heat-stabilized for
endurance applications to high temperatures.
Polyamide 6.6
UV stabilized
-40°C ÷ 105°C
black
UL 94-V2
2,7%
8,5%
Polyamide 6.6 UV
for improved weather resistance.
Polyamide 6.6
Self-extinguishing
-40°C ÷ 85°C
natural
UL 94-V0
2,7%
8,5%
Self-extinguishing polyamide
(halogen and phosphor-free).
Belturing Plus
-45°C ÷ 85°C
black
UL 94-HB
0,6%
1,2%
Polyethylene HD
-40°C ÷ 100°C
white
UL 94-HB
-
-
Good resistance to UV rays and weather.
Improved shock resistance.
Reduced moisture absorption.
High-density polyethylene.
Good shock resistance.
Polyethylene LD
-50°C ÷ 90°C
natural/black
white
UL 94-HB
UL 94-V2
-
-
Polyamide 6
-10°C ÷ 65°C
black
UL 94-HB
3,0%
9,5%
Polypropylene
-10°C ÷ 105°C
natural
UL 94-HB
-
-
Resistant to high temperatures, without
any absorption of humidity.
Good resistance to bases and weak acids.
ABS
-10°C ÷ 60°C
natural / black
UL 94-HB
0,3%
-
ABS injection moulding grade.
Good shock resistance, good resistance
to inorganic salts, bases, alcohols
and hydrocarbides.
Good heat resistance.
Low moisture absorption.
PVC
-10°C ÷ 70°C
natural
UL 94-V0
-
-
Rigid PVC. Low resistance to
organic compounds and solvents.
Good aging resistance. No moisture absorption.
-5°C ÷ 85°C
transparent
ULV 94-V0
-
-
Low resistance to chemical agents
and solvents. Good UV resistance.
Polycarbonate
Low-density polyethylene.
Good shock resistance.
Polyamide 6 for moulding injection.
*R.H.=relative humidity
19
CABLE TIES & ACCESSORIES
STANDARD CABLE TIES
Characteristics:
Applications
Material:
Humidity absorption:
Polyamide 6.6
2,7%
(50% relative humidity)
• Working temperature
• Tightening temperature
• Max admissible point
• Melting temperature
-40°C ÷ 85°C
-10°C ÷ 60°C
+110°C for short time
+256°C
Limit Oxygen Index (LOI):
Flammability rating:
27%
UL 94 class V2.
Tested according to EN 50146
• High resistance to bases, oils, greases, oil derivatives.
• Limited resistance to acids.
• Not resistant to phenols and to chloride solvents.
• Halogen-free resins.
• UV resistance (black color).
EC Directives:
The raw material used to produce our cable ties is
compliant with EC Directives:
2000/53/EC (ELV)
2002/95/EC (RoHS)
2002/96/EC (WEEE)
2003/11/EC
• Electrical installations.
• Industrial Wiring.
• Automotive.
• Panel building.
• Special applications.
Characteristics
• Our Cable Ties are made exclusively of
polyamide 6.6 so that they do not cause
issues of material separation during
recycling or interferences in electronic
equipments.
• In the black cable ties the added carbon
black gives an UV resistance according
to ISO 4892 (QUV-B 150 hours),
compared to 3 years of outdoor exposure
under the sunlight and UV action.
Benefits
• Smooth rounded edges make them easier
to be handled and safer to be installed.
• Bent rounded tip allows easier insertion
through the head of the cable ties.
• Low friction coefficient of the material.
Tools for cable ties, see pages 120-121.
Our cable ties are constantly tested in our
laboratories following important international
standards. Particular extreme cable ties uses, weather
conditions or even unsuitable applications might
nevertheless vary some of the data we declare.
Therefore, in case of specific enquiries or problems,
do not hesitate to contact us. We will be pleased to
share our experience with You.
20
File E 86244(M)
N° 99 332 - 97 HH
ELE/7998/1
E-6996
CABLE TIES & ACCESSORIES
Polyamide 6.6 cable ties width 2,2 ÷ 12,5 mm
2.2
2.5
2.6
3.6
2.6
4.5
4.8
7.8
9.0
12.5
Code
Code
Dimensions
Ø Bundle
Tensile strength
Natural
Black
(mm)
max (mm)
(kg)
(N)
Bag
Carton
pcs
pcs
5201/CE
5301/CE
2,2x75
15
6,12
60
100
20.000
5201E
5301E
2,2x75
15
6,12
60
1.000
100.000
5203/CE
5303/CE
2,5x98
21
8,16
80
100
15.000
5203E
5303E
2,5x98
21
8,16
80
1.000
50.000
5203/B2
5303/B2
2,5x98
21
8,16
80
20.000
20.000
5205/CE
5305/CE
2,5x135
32
8,16
80
100
12.000
5205E
5305E
2,5x135
32
8,16
80
1.000
30.000
5206/CE
5306/CE
2,6x160
40
8,16
80
100
10.000
5206E
5306E
2,6x160
40
8,16
80
1.000
30.000
5207/CE
5307/CE
2,6x200
52
8,16
80
100
8.000
5207E
5307E
2,6x200
52
8,16
80
1.000
25.000
5209/CE
5309/CE
3,6x140
35
13,26
130
100
7.000
5209E
5309E
3,6x140
35
13,26
130
1.000
25.000
5214/CE
5314/CE
3,6x200
50
13,26
130
100
7.000
5214E
5314E
3,6x200
50
13,26
130
1.000
20.000
5210/CE
5310/CE
3,6x290
80
13,26
130
100
4.500
5210E
5310E
3,6x290
80
13,26
130
500
15.000
5208E
5308E
3,6x370
103
13,26
130
100
4.000
5212/CE
5312/CE
4,5x120
24
22,44
220
100
8.000
5212E
5312E
4,5x120
24
22,44
220
1.000
20.000
5211/CE
5311/CE
4,5x160
40
22,44
220
100
6.000
5211E
5311E
4,5x160
40
22,44
220
1.000
18.000
5213/CE
5313/CE
4,8x178
45
22,44
220
100
5.000
5213E
5313E
4,8x178
45
22,44
220
1.000
15.000
5215/CE
5315/CE
4,8x200
50
22,44
220
100
4.000
5215E
5315E
4,8x200
50
22,44
220
1.000
14.000
5216/CE
5316/CE
4,8x250
68
22,44
220
100
4.500
5217E
5317E
4,8x290
78
22,44
220
100
3.500
5219E
5319E
4,8x360
100
22,44
220
100
3.000
5218E
5318E
4,8x390
106
22,44
220
100
7.000
5220E
5320E
4,8x430
115
22,44
220
100
6.000
5221E
5321E
7,8x120
25
55,08
540
100
4.000
5223E
5323E
7,8x180
45
55,08
540
100
2.500
5225E
5325E
7,8x240
63
55,08
540
100
2.000
5226E
5326E
7,8x300
80
55,08
540
100
1.500
5227E
5327E
7,5x365
100
55,08
540
100
1.500
5229E
5329E
7,5x450
130
55,08
540
100
3.000
5231E
5331E
7,5x540
158
55,08
540
100
2.000
5233E
5333E
7,8x750
220
55,08
540
100
2.000
5234E
5334E
9,0x780
233
71,4
700
100
1.300
5235E
5335E
12,5x225
57
110
1.080
50
2.000
5237E
5337E
12,5x500
143
110
1.080
50
1.000
5239E
5339E
12,5x720
213
110
1.080
50
1.000
5241E
5341E
12,5x850
255
110
1.080
50
1.500
5243E
5343E
12,5x1000
302
110
1.080
50
1.000
*The nominal dimensions can slightly change according to the utilized mould.
COLOURED CABLE TIES - polyamide 6.6 width 2,5 ÷ 4,8 mm
5203/C *E
5209/C *E
5214/C *E
5215/C *E
5217 *E
♦
♦
♦
2,5x98
3,6x140
3,6x200
4,8x200
4,8x290
♦
21
32
50
50
78
8,16
13,26
13,26
22,44
22,44
80
130
130
220
220
100
100
100
100
100
15.000
7.000
7.000
4.000
3.500
* R=Red, G=Yellow, V=Green, B=Blue
Minimum order quantity: 1 carton. Other coloures and dimensions available on request.
21
CABLE TIES & ACCESSORIES
CABLE TIES ROTATING DISPLAY - (with fixed hooks)
Code display: 8312500
Height: 76 cm - Width: 26 cm - Depth: 26 cm
This cable ties display can contain 7 different dimensions of cable ties (from
cod. 5x01/CE up to 5x27E) for a max quantity of 5 cable ties bags for hook.
CABLE TIES FLOOR DISPLAY - (with moving hooks)
Code display 8222200
Height: 202 cm - Width: 54 cm - Depth: 36 cm
This cable ties floor display, with moving hooks, can contain 30 different
dimensions of cable ties for a max quantity of 7 cable ties bags for hook.
Composition of the cable ties floor display
Cable ties composition: 8222212
5203/CE
n. 7 bags 100 pcs.
2,5x135 mm
natural
5205/CE
n. 7 bags 100 pcs.
2,5x135 mm
natural
5207/CE
n. 7 bags 100 pcs.
2,6x200 mm
natural
5208E
n. 7 bags 100 pcs.
3,6x370 mm
natural
5209/CE
n. 7 bags 100 pcs.
3,6x140 mm
natural
5210/CE
n. 7 bags 100 pcs.
3,6x290 mm
natural
5214/CE
n. 7 bags 100 pcs.
3,6x200 mm
natural
5216/CE
n. 7 bags 100 pcs.
4,8x250 mm
natural
5219E
n. 7 bags 100 pcs.
4,8x390 mm
natural
5225E
n. 7 bags 100 pcs.
7,8x240 mm
natural
5303/CE
n. 7 bags 100 pcs.
2,5x98 mm
black
5305/CE
n. 7 bags 100 pcs.
2,5x135 mm
black
5307/CE
n. 7 bags 100 pcs.
2,6x200 mm
black
5308E
n. 7 bags 100 pcs.
3,6x370 mm
black
5309/CE
n. 7 bags 100 pcs.
3,6x140 mm
black
5310/CE
n. 7 bags 100 pcs.
3,6x290 mm
black
5314/CE
n. 7 bags 100 pcs.
3,6x200 mm
black
5316/CE
n. 7 bags 100 pcs.
4,8x250 mm
black
5319E
n. 7 bags 100 pcs.
4,8x390 mm
black
5325E
n. 7 bags 100 pcs.
7,8x240 mm
black
WIRING AND FIXING SYSTEMS FLOOR DISPLAY
Code display 8221701
Height: 225 cm - Width: 103 cm - Depth: 56 cm
Floor display with hooks and shelves.
For further information, please contact our sales department.
22
CABLE TIES & ACCESSORIES
COLSPEED CABLE TIES
Characteristics:
Applications
Material:
Humidity absorption:
Polyamide 6.6
2,7%
(50% relative humidity)
• Working temperature
• Tightening temperature
• Max admissible point
• Melting temperature
-40°C +85°C
-10°C +60°C
+110°C for short time
+256°C
Limit Oxygen Index (LOI):
Flammability rating:
27%
UL 94 class V2.
• Electrical installations.
• Industrial Wiring.
• Automotive.
• Panel building.
• Special applications.
• Exterinal application.
Characteristics
• The flat head, the high surface and the
closing system with external teeth of these
Cable Ties, make them particularly suitable
for applications on suspended lines,
avoiding problems of insulation damage.
• In the Colspeed cable ties the added
carbon black gives an UV resistance
according to ISO 4892 (QUV-B 150
hours), compared to 3 years of outdoor
exposure under the sunlight and UV action.
Tested according to EN 50146 and EDF HN 33 S 62
• High resistance to bases, oils, greases, oil derivatives.
• Limited resistance to acids.
• Not resistant to phenols and to chloride solvents.
• Halogen-free resins.
• UV resistance.
Benefits
EC Directives:
The raw material used to produce these cable ties is
compliant with EC Directives:
2000/53/EC (ELV)
2002/95/EC (RoHS)
2002/96/EC (WEEE)
2003/11/EC
• Ensure a permanent installation.
• Bent “tooth”.
• Bent rounded tip for the safest application.
• Smooth rounded edges make them easier
to be handled and installed.
Tools for cable ties, see pages 120-121.
Code
Dimension
Black
(mm)
Head
Ø Bundle
max (mm)
Tensile strength
(kg)
(N)
Bag
Cartoon
pcs
pcs
6501E
8,8X200
TS
40
36,72
360
100
4.500
6502E
8,8X290
TD
70
55,08
540
100
3.000
6503E
8,8X380
TD
100
55,08
540
100
2.000
• TS = single head • TD = double head
23
CABLE TIES & ACCESSORIES
BELTURING PLUS CABLE TIES
Characteristics:
Applications
Humidity absorption:
<1%
• Working temperature
• Tightening temperature
• Max admissible point
da -45°C a +85°C
da -30°C a +60°C
+120°C for short time
Limit Oxygen Index (LOI):
22% (EN ISO 4589-1and ASTM D 2863-00)
Flammability rating:
UL 94 class HB.
Halogen-free resins.
Tested according to EN 50146 and EDF HN 33 S 62
• High UV resistance.
• High resistance to bases, oils, greases, oil derivatives.
• Limited resistance to acids.
• Not resistant to phenols and to chloride solvents.
• Halogen-free resins.
EC Directives:
The raw material used to produce these cable ties is
compliant with EC Directives:
2000/53/EC (ELV)
2002/95/EC (RoHS)
2002/96/EC (WEEE)
2003/11/EC
• Electrical installations.
• Industrial wiring.
• Automotive.
• Panel building.
• Special applications.
• Outdoor uses.
Characteristics
The flat head, the high surface and the
closing system with external teeth of these
Cable Ties make them particularly suitable
for applications on suspended lines, avoiding
problems of insulation damage.
Benefits
• Highly withstands climatic changes,
also in sea-areas.
• High UV resistance.
• Halogen-free resins.
Tools for cable ties, see pages 121.
TEMPORARY
INSTALLATION
(RELEASABLE
CABLE TIE)
24
DEFINITIVE
INSTALLATION
85°C
-30°C
60°C
UV
CABLE TIES & ACCESSORIES
RoHS
conforme
G
N
I
UR
T
L
BE
US
L
P
-45°C
85°C
-30°C
Belturing Plus Cable Ties - SINGLE HEAD
Code
60°C
6449XE
Ø Bundle
Tensile strength
Bag
Carton
(mm)
max (mm)
(Kg)
(N)
pcs
pcs
115x6
25
28,56
280
100
9.000
45
28,56
280
100
6.000
78
28,56
280
100
4.800
6450XE
180x6
US
L
6452XE
290x6
P
G
6454XE
IN 360x6
6447XE
132x9
R
U
T
6451XE
180x9
L
E
B
UV
RoHS
conforme
Dimension
100
28,56
280
100
1.500
27
39,78
390
100
4.800
40
39,78
390
100
4.800
Belturing Plus Cable Ties - DOUBLE HEAD
Code
Dimension
Ø Bundle
Tensile strength
Bag
Carton
(mm)
max (mm)
(Kg)
(N)
pcs
pcs
6453XE
260x9
62
55,08
540
100
2.800
6448XE
300x9
80
55,08
540
100
1.500
6455XE
360x9
93
55,08
540
100
1.500
6456XE
510x9
140
55,08
540
100
1.000
6457XE
760x9
220
55,08
540
100
800
A very practical box that can easily be hung to
your belt. Its convenient upper opening, very
easy to be reclosed, allows the quickest
picking-up of the product and the best
protection from dust.
25
CABLE TIES & ACCESSORIES
Cable ties COLSTEEL
Cable ties made in stainless steel 304 with ball lock system.
Characteristics:
Material:
Operating temperature:
Stainless steel 304
-80 °C ÷ 538 °C.
Uninflammable.
Resistance to external agents:
resistance to acid, oils, greases, chemicals, solvents.
• High resistance to the seawater and to corrosive atmosphere.
• Excellent resistance to UV rays.
• Stainless steel 316 on request.
• Outstanding
26
CABLE TIES & ACCESSORIES
Applications
Characteristics
Benefits
For heavy duty applications and where a
great resistance to corrosion, high
temperature, fire, chemicals and
atmospheric agents are required. These
cable ties are particularly used in
shipbuilding, mining, oil rigs, food
industry, theatre, cinemas and exhibition
halls.
• High resistance to corrosion.
• High tensile strength.
• No absorption of humidity.
• High resistance to very high temperature
and flame.
• High resistance to atmospheric agents
and UV rays.
• Out standing chemical and corrosion
resistance.
• The ball lock system allows a little effort
and permit the closing adjust in
continuous.
• It is possible to lock the cable ties by
hand or with the dedicated tool (code
5407).
• The easy closing system allows to save
time during the installation.
• They can be put like fire assurance when
other plastic cable ties are used (i.e. in
the ship technological plants).
• The absence of flashes and cutting
edges avoid damages on the cable
electrical insulation.
Stainless steel cable ties
Cod.
Dimensions
(mm)
ø Bundle
max (mm)
Thickness
(mm)
6701
6703
6706
6708
6710
6712
6719
6720
6722
6724
6726
6728
4,6x127
4,6x201
4,6x266
4,6x362
4,6x521
4,6x838
7,9x201
7,9x266
7,9x362
7,9x521
7,9x838
7,9x1067
25
50
67
102
152
254
50
67
102
152
254
305
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
Tensile strength
(Kg)
(N)
Bag
pcs
46
46
46
46
46
46
114
114
114
114
114
114
100
100
100
100
50
50
100
100
100
50
50
50
450
450
450
450
450
450
1118
1118
1118
1118
1118
1118
Tool for cable ties
Cod.
5407
L
Weigth
Packaging
(mm)
(gr.)
pcs
178
560
1
Tool for stainless steel cable ties with width up to 7,9 mm. Made in a strong
metallic structure, it allows to adjust the tightening strength with the screw under
the handle. When the set tension is reached, the blade cuts off the tail of the ties
without effort and flashes.
27
CABLE TIES & ACCESSORIES
SPECIAL CABLE TIES
Cable ties available on request. Minimum order quantities are applied.
These cable ties, made of polyamide 6.6
with additives, can be used for operating
temperatures up to 125°C /145°C for
short time.
Operating temperature: -40°C ÷ 125°C
Flammability rating: UL-94 V2.
These cable ties are made with a special
compound that assures an UV resistance
according to ISO 4892 (QUV-B 600
hours), compared to 10 years of outdoor
exposure under the sunlight and UV
action.
Operating temperature: -40°C ÷ 105°C
Flammability rating: UL-94 V2.
These cable ties, made of polyamide 6.6
with additives, can be used where the
auto extinguishing performance is
required. They conform with UL-94 V0
and GW 960°C standards and the
halogen and phosphorus free material
avoids toxic emission in event of fire.
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V0.
28
HEAT RESISTANT cable ties (-40°C +125°C)
Code
Code
Dimension
Ø Bundle
Natural
Black
(mm)
max (mm)
Tensile strength
Bag
Carton
(N)
pcs
pcs
5203/C TE
5303/C TE
2,5x98
21
5209/C TE
5309/C TE
3,6x140
32
8,16
80
100
40.000
13,26
130
100
5214/C TE
5314/C TE
3,6x200
50
25.000
13,26
130
100
20.000
5215/C TE
5315/C TE
4,8x200
5217 TE
5317 TE
4,8x290
50
22,44
220
100
13.000
78
22,44
220
100
5227 TE
5327 TE
7,5x365
10.000
100
55,08
540
100
3.500
(kg)
UV AND WEATHER RESISTANT cable ties (UL 94 - V2) - for outdoor use
Code
Black
Dimension
Ø Bundle
Bag
Carton
(N)
pcs
pcs
8,16
80
100
40.000
13,26
130
100
25.000
13,26
130
100
20.000
22,44
220
100
13.000
78
22,44
220
100
10.000
100
55,08
540
100
3.500
(mm)
max (mm)
5303/C UVE
2,5x98
21
5309/C UVE
3,6x140
35
5314/C UVE
3,6x200
50
5315/C UVE
4,8x200
50
5317 UVE
4,8x290
5327 UVE
7,5x365
Tensile strength
(kg)
SELF-EXTINGUISHING cable ties (UL 94 - V0) - GW 960°C
Code
Natural
Dimension
Ø Bundle
Tensile strength
(kg)
Bag
Carton
(N)
pcs
pcs
(mm)
max (mm)
5203/C V0E
2,5x98
21
8,16
80
100
40.000
5209/C V0E
3,6x140
35
13,26
130
100
25.000
5214/C V0E
3,6x200
50
13,26
130
100
20.000
5215/C V0E
4,8x200
50
22,44
220
100
13.000
5217 V0E
4,8x290
78
22,44
220
100
10.000
5227 V0E
7,5x365
100
55,08
540
100
3.500
CABLE TIES & ACCESSORIES
The polyamide 6.6 cable ties with
marking plate, allow a quick
identification through specific marking
on the plate.
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V2.
IDENTIFICATION CABLE TIES
Code
Dimension
(mm)
Plate
height
(mm)
Plate
width
(mm)
Ø Bundle
max
(mm)
Tensile strength
Bag
Carton
(kg)
(N)
pcs
pcs
52100-ME
2,5x100
8
25,4
52200-ME
2,5x200
8
25,4
20
8,16
80
100
10.000
50
8,16
80
100
7.500
(mm)
Plate
height
(mm)
Plate
width
(mm)
Ø Bundle
max
(mm)
Tensile strength
Bag
Carton
(kg)
(N)
pcs
pcs
52110-ME
2,5x110
9,1
20,4
52210-ME
2,5x210
9,1
20,4
20
8,16
80
100
10.000
52
8,16
80
100
7.500
(mm)
Plate
height
(mm)
Plate
width
(mm)
Ø Bundle
max
(mm)
Tensile strength
Bag
Carton
(kg)
(N)
pcs
pcs
52190-ME
4,8x190
28
13
52270-ME
4,8x270
28
13
48
22,44
220
100
5.000
68
22,44
220
100
4.000
IDENTIFICATION CABLE TIES
Code
Dimension
IDENTIFICATION CABLE TIES
Code
The nylon 6.6 releasable cable ties
allow a quick and simple release of the
ties. They are ideal for temporary
installations or when the addition or
removal of cables is required.
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V2.
Dimension
RELEASABLE CABLE TIES
Code
Code
Dimension
Ø Bundle
nat.
black
(mm)
max (mm)
Tensile strength
(kg)
(N)
Bag
Carton
pcs
pcs
5250E
5350E
7,5x200
50
22,44
220
100
7.500
5252E
5352E
7,5x250
65
22,44
220
100
5.000
5254E
5354E
7,5x350
100
22,44
220
100
4.500
* Coloured cable ties available on request.
♦R=Red, ♦G=Yellow, ♦V=Green, ♦B=Blue
29
CABLE TIES & ACCESSORIES
The Polyamide 6.6 push mount cable
ties are used for fixing cables to panels
with thickness up to 3 mm.
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V2.
“M”
PUSH MOUNT CABLE TIES
Code
Dimension
Ø Hole
(mm)
Panel
thickness
(mm)
Ø Bundle
max
(mm)
Tensile strength
Bag
Carton
(mm)
(kg)
(N)
pcs
pcs
52155-ME 3,5x150
5,2
2,7
52205-ME 4,5x200
6,3
3,0
38
13,26
130
100
7.500
50
22,44
220
100
52203-A
4,5x100
6,3
5.000
3,0
50
22,44
220
100
5.000
52204-A
4,5x150
52205-A
4,5x200
6,3
3,0
50
22,44
220
100
5.000
6,3
3,0
50
22,44
220
100
5.000
“A”
The Polyamide 6.6 cable ties with
mounting hole are used for bundling the
cables with a screw or bolt.
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V2.
The Polyamide 6.6 cable tray ties are
used for fixing the cables to the cable
tray.
CABLE TIES WITH MOUNTING HOLE
Code
Dimension
Ø Bundle
(mm)
max (mm)
(kg)
(N)
(mm)
pcs
pcs
52150-IE
3,6x150
2
13,26
130
4,5
100
7.500
52200-SE
4,8x200
50
22,44
220
5,2
100
5.000
52200-HE
7,8x200
44
55,08
540
6,5
100
3.000
52300-HE
7,8x300
75
55,08
540
6,5
100
2.000
52380-HE
7,8x380
104
55,08
540
6,5
100
2.000
Code
Dimension
Tensile strength
(kg)
Bag
Carton
Bag
Carton
(N)
pcs
pcs
5346
7,8x (24 + 270)
55,08
540
100
2.000
5347
12,6x (50 + 275)
110,16
1.080
50
1.000
* Cable Ties available on request and minimum quantiues.
30
Ø Hole
CABLE TRAY TIES*
(mm)
Operating temperature: -40°C ÷ 85°C
Flammability rating: UL-94 V2.
Tensile strength
CABLE TIES & ACCESSORIES
CABLE TIES ACCESSORIES
CABLE TIES SUPPORTS
Applications
Characteristics
Benefits
Fixing of cables and pipes.
Installation temperature: > -5°C
Polyamide 6 black (carbon black).
Available in black and white colours
(characteristics on page 19).
Very easy installation: for cable ties up to 9 mm
width. Two different types for different wall
distances.
5458
5459
5456A
5458A
WALLPLUG BASES FOR CABLE TIES polyamide 6
A
D
B
C
A
D
Code
Code
Ø Hole
Black
White
Dimensions (mm)
Bag
Carton
(mm)
A
B
C
D
pcs
pcs
5456 AE 5456 AWE
6
7,8
30,7
6,3
9,6
100
5.000
5458E
5.000
5458 WE
8
10,0
37,0
6,5
9,7
100
5458 AE -
8
10,0
37,0
6,5
9,7
100
5.000
5459E
8
10,0
37,0
13
9,7
100
4.000
-
* Grey colour on request.
B
C
Applications
Characteristics
Benefits
Fixing of cables and pipes.
Polyamide 6.6 black (carbon black).
The support is provided with M6/7
thread, can therefore be fixed with plug
cod. 566112.
(characteristics on page 19)
For cable ties up to 9 mm width. Suitable for
either countersunk or flat headed screws.
For wall plug max 8 mm.
CABLE TIE SUPPORT in polyamide 6.6 for cable ties width up to 9 mm
C
B
A
D
Code
1041301E
Dimensions (mm)
Thread
A
B
C
D
9,4
5
23
17,6
M6/7
Bag
Carton
pcs
pcs
100
10.000
THREADED WALL PLUG M6/7 in polyamide 6.6 for cable tie support
Code
566112
Length
Ø Hole
(mm)
(mm)
37
8
Thread
Bag
Carton
pcs
pcs
M 6/7
100
1.600
31
CABLE TIES & ACCESSORIES
Applications
Characteristics
Benefits
Fixing of cables and pipes.
Polyamide 6.6 black (carbon black).
(characteristics on page 19)
Fast fixing with hammer-in anchor
(our UCX Ø 5x36 mm).
For cable ties up to 9 mm width.
CABLE TIE SUPPORT in polyamide 6.6 with anchor
C
B
A
D
Code
Dimensions (mm)
1041303
Bag
Carton
A
B
C
D
pcs
pcs
9,4
5
23
17,6
100
10.000
Applications
Characteristics
Benefits
Electrical panels.
Polyamide 6.6.
(characteristics on page 19)
For cable ties width max 9 mm.
Fixing with screw or rivet.
CRADLES IN POLYAMIDE 6.6
H
F
A
C
B
32
Code
Code
Cable ties
Natural
Black
width (mm)
5498
5499
5
5496E
5497E
9
Dimensions (mm)
A
F
Bag
Carton
H
pcs
pcs
B
C
9,5
15
3,5
5
7
100
10.000
14,6
22,5
5
9,3
11
100
5.000
CABLE TIES & ACCESSORIES
Applications
Characteristics
Benefits
Electrical panels.
Polyamide 6.6.
(characteristics on page 19)
Fixing with screw or rivet.
EYELETS IN POLYAMIDE 6.6
H
F
C
Code
Code
Cable ties
Dimensions (mm)
Natural
Black
width (mm)
A
B
C
F
5460E
5461E
4,8
10
19
4,1
5
Bag
Carton
H
pcs
pcs
6
100
10.000
A
B
Applications
Characteristics
Benefits
Suspended electrical installations.
Polyamide 6.6 black (carbon black).
(characteristics on page 19)
Enables cables to be secured to posts or pipes
by passing two ties through the rectangular hole.
TWIN TIE DEVICE in polyamide 6.6
A
Code
B
1041302E
Dimensions (mm)
Bag
Carton
A
B
C
pcs
pcs
9,3
9,5
21,3
100
10.000
C
33
CABLE TIES & ACCESSORIES
Applications
Characteristics
Benefits
For use in pre-drilled or punched holes on
plates with tickness up to 3 mm.
Hole Ø 6,5 mm.
Polyamide 6.6.
(characteristics on page 19)
Suitable for applications on sheet-steel, with
cable ties up to 7,8 mm width.
ARROWHEAD CRADLE
B
C
Code
104300
F
D
E
Dimensions (mm)
Ø Fixing hole
Bag
Carton
A
B
C
D
E
F
(mm)
pcs
pcs
10
10,6
8,1
3
8
7,1
6,5
100
17.000
A
IDENTIFICATION PLATE BADGES
Applications
Characteristics
Benefits
Electrical panels, cable bundles.
Material: polyamide 6.6.
(characteristics on page 19)
Quick and economic solution for the
identification of a bundle of cables.
TYPE A
TIPO B
TIPO C
TIPO D
IDENTIFICATION PLATE BADGES*
Code
Type
Length
Width
Bag
(mm)
(mm)
(mm)
pcs
104293
A
60,5
25,2
100
104291
B
26,4
16,2
100
104292
C
40,3
20,5
100
104294
D
59,9
49,9
100
*IMPORTANT: these identification plates can be attached around a cable harness with cable ties up to 4,8 mm wide.
34
CABLE TIES & ACCESSORIES
MOUNTING BASES - SINGLE WAY
Applications
Characteristics
Benefits
They are used with cable ties, for rouling and
securing wire bundles or cables. Their thin
profile allows use in limited areas.
Material: ABS.
(characteristics on page 19)
Self adhesive bases with 2 different types of
adhesive foam: rubber base, acrylic base.
The rubber base adhesives: are
particularly
suitable
for
immediate
applications.
The acrylic base adhesive: is instead more
suitable for long period applications and
where a good UV ray resistance is required.
Easy to apply.
Suitable for cable ties up to 4,8 mm width.
Operating temperature: -10°C ÷ 60°C
Flammability rating: UL 94-HB.
mounting bases WITHOUT ADHESIVE (application with screw)
H
C
F A
B
Code
Code
Cable ties
Dimensions (mm)
Bag
Carton
Natural
Black
width (mm)
A
B
C
F
H
pcs
pcs
5421E
5423E
3,6
19
19
4,2
5422E
5424E
4,8
27
27
4,2
4
5
100
10.000
6
7,4
100
5.000
mounting bases WITH RUBBER BASE ADHESIVE
Code
Code
Cable ties
Natural
Black
width (mm)
A
B
Dimensions (mm)
C
F
Bag
Carton
H
pcs
pcs
5426 RBE 5428 RBE
3,6
19
19
4,2
5427 RBE 5429 RBE
4,8
27
27
4,2
4
5
100
10.000
6
7,4
100
5.000
Bag
Carton
H
pcs
pcs
mounting bases WITH ACRYLIC BASE ADHESIVE
Code
Code
Cable ties
Dimensions (mm)
Natural
Black
width (mm)
A
B
C
F
5426 3MVE 5428 3MVE
3,6
19
19
4,2
4
5
100
10.000
5427 3MVE 5429 3MVE
4,8
27
27
4,2
6
7,4
100
5.000
ADHESIVE DATA SHEET
Adhesive data sheet
Bonding foam
Density
500 hour static shear adhesion*
Maximum recommended weight loading*
Dynamic shear adhesion
Tensile strength
Elongation
U.V. resistance
Service temperature
Recommended application
Use
u.m.
kg/m3
kg/cm2
kg/cm2
kg/cm2
kg/cm2
rubber
acrylic
base
base
polyethylene
100
0,7
0,36
4,1
>10
>150%
not recommended
-40°C / +60°C
+15°C / +40°C
immediate
application
polyester
320
0,3
0,15
8
>20
>90%
good
-40°C / +120°C
+15°C / +40°C
application
after 24h rest
* On clean zinc metallic surfaces.
35
CABLE TIES & ACCESSORIES
MOUNTING BASES - TWO WAYS
two way mounting bases WITHOUT ADHESIVE (application with screw)
Code
H
F
A
Code
Cable ties
Dimensions (mm)
Bag
Carton
Natural
Black
width (mm)
A
B
C
F
H
pcs
pcs
5466E
5468E
3,6
19
19
4,1
4
5
100
10.000
5472E
5474E
4,8
27
27
4,8
6
6,5
100
5.000
two way mounting bases WITH RUBBER BASE ADHESIVE
C
B
Code
Code
Cable ties
Natural
Black
width (mm)
A
B
Dimensions (mm)
C
F
Bag
Carton
H
pcs
pcs
5467 RBE 5469 RBE
3,6
19
19
4,1
5473 RBE 5475 RBE
4,8
27
27
4,8
4
5
100
10.000
6
6,5
100
5.000
two way mounting bases WITH ACRYLIC BASE ADHESIVE
Code
Code
Cable ties
Natural
Black
width (mm)
Dimensions (mm)
Bag
Carton
A
B
C
F
H
pcs
pcs
5467 3MVE 5469 3MVE
3,6
19
19
4,1
4
5
100
10.000
5473 3MVE 5475 3MVE
4,8
27
27
4,8
6
6,5
100
5.000
INSTALLATION INSTRUCTION FOR SELF ADHESIVE MOUNTING BASES
12
9
3
6
1
36
Clean the surface using an
appropriate cleaner (e.g.
isopropanol/water) avoiding
to leave any residues.
2
Wait until the cleaned surface is completely dried.
3
Peel off the protective
film avoiding to touch
the adhesive.
4
Put the base on the cleaned surface pressing
down with the finger for
several seconds.
5
Wait for a certain time (minutes
in case of syntetic rubber, hours
in case of acrylate) to assure the
max adhesion to the surface.
FIXING ACCESSORIES
ELEFIX: PIPES FIXING SYSTEM
Characteristics:
Applications
• ELEFIX is the practical and fast support
for cables and pipes.
• It is available in three versions:
the grey one is recommended for
indoor applications, the black one, UV
stabilized, is indicated for the
maximum resistance against UV rays
and atmosphere agents, and the white
one is for applications needing glow
wire 960°C resistance (public
buildings, cinemas, theatres etc.).
Material:
Colours available:
Sizes available:
Width of the cable tie:
Polyamide 6.6
Grey, black UV resistant, white self-extinguishing.
Ø 16 ÷ 32 mm; Ø 40 ÷ 63 mm.
7,5 mm.
Temperature:
• Working temperature
• Tightening temperature
-40°C ÷ 85°C
-15°C ÷ 60°C
Threaded hole:
M6/7 - 1,5 mm.
Characteristics
Flammability rating:
UL 94 class V2 for grey and black ELEFIX.
UL 94 V0 for white ELEFIX.
• The two versions 16-32 mm. and 4063 mm. allow the fixing of all pipes
with a maximum diameter of 63 mm.
Max tensile strength: 360 N.
Benefits
• THE UNIVERSAL FIXING.
The ELEFIX range with its
accessories is suitable to be
fixed to any material such
as natural stone, concrete,
hollow brick, plasterboard,
composite boards and aerated concrete.
• THE ORIGINAL PACKAGING IS
FUNCTIONAL AND COMMUNICATIVE
OFFERING TO THE INSTALLERS THE
MAXIMUM COMFORT ON APPLICATION.
The box contains an empty space for placing
the case with the fixing accessories which are
more suitable for the wished application.
Such solution allows a fast and simple
replacement of the fixing products, helping and
improving the job organization and efficiency.
37
FIXING ACCESSORIES
natural
stone
solid
brick
concrete
hollow
brick
lightweight
concrete
block
hollow
brick
plasterboards
composite
boards
wood
aerated
concrete
M6/7 ANCHOR
( 85 )
( 30 )
UCX VM6 ANCHOR
( 200 )
T6/VA6-8 ANCHOR
( 350 ) (*)
( 230 ) (*)
( 100 ) (*)
SELF-DRILLING MINI DRIVA SCREW
( 30 )
( 30 )
( 90 )
( 90 )
( 60 )
( 60 )
( 30 )
( 30 )
T-CLICK SELF-DRILLING ANCHOR
( 90 )
DRIVA SELF-DRILLING ANCHOR
*
DRIVA NYLON SELF-DRILLING
38
( 60 )
*
( 40 )
( ) recommended axial load of the fixing product in Newton (N) [10 N
( 60 )
1 kg]
*
( 40 )
( 40 )
* with pre-drilling
(*) T6/VA8 anchor value
M6/7 ANCHOR
SELF-DRILLING MINI DRIVA SCREW
UCX VM6 ANCHOR
DRIVA SELF-DRILLING ANCHOR
T6/VA6-8 ANCHOR
T-CLICK SELF-DRILLING
ANCHOR
DRIVA NYLON
SELF-DRILLING ANCHOR
FIXING ACCESSORIES
A COMPLETE RANGE FOR FIXING CABLES AND PIPES
C
Black
White
UV
A
D
Indoor
GW 960°C
Grey
C
Outdoor
Self
extinguishing
B
Type
Code
Ø Pipes
Colour Applications
Dimension (mm)
(mm)
A
B
C
Tensile strength Packaging
D
(N)
Box
Carton
ELEFIX 16-32 566246 16-32
grey
internal
17,6 24,5 180
5,9
360
100
1200
ELEFIX 40-63 566251 40-63
grey
internal
17,6 40,5 280
5,9
360
100
600
ELEFIX 16-32 566247 16-32
black UV stabilized 17,6 24,5 180
5,9
360
100
1200
ELEFIX 40-63 566252 40-63
black UV stabilized 17,6 40,5 280
5,9
360
100
600
ELEFIX 16-32 566248 16-32
white GW 960° C 17,6 24,5 180
5,9
360
100
1200
ELEFIX 40-63 566253 40-63
white GW 960° C 17,6 40,5 280
5,9
360
100
600
anchor M6/7
Type
Provided with a tool for the
easiest insertion of the anchor
M6/7
Code
566112
Anchor length
Ø Plug
Min drill
(mm)
(mm)
depht (mm)
Thread
Packaging
37
8
41
M6/7
Anchor length
Ø Plug
Min drill
Thread
(mm)
(mm)
depht (mm)
35
6
45
M6
Anchor length
Ø Plug
Min drill
Dimensions
Box
Carton
100
1600
anchor UCX VM6
Type
UCX 6x35 VM6
Code
8710017
Packaging
Box
Carton
100
3.200
anchor T6/VA6-8
Type
Code
Packaging
(mm)
(mm)
depht (mm)
screw (mm)
Box
Carton
T6/VA6
565390
30
6
40
4,5x40
100
1.600
T6/VA8
565391
40
8
50
5,0x50
50
800
self-drilling MINI DRIVA SCREW
Type
MINI DRIVA
Code
565398
Anchor
Head screw
Length (mm)
size (mm)
Box
Packaging
Carton
26,5
7,5
200
1600
self-drilling anchor T-CLICK
Type
T-CLICK
Code
566301
Anchor length
Head plug
Dimension
Head screw
(mm)
size (mm)
screw (mm)
size (mm)
Box
Packaging
Carton
38
14
4,5x45
10
100
800
self-drilling anchor DRIVA
Type
DRIVA
Code
8704226
Anchor length
Head plug
Dimension
Head screw
(mm)
size (mm)
screw (mm)
size (mm)
Box
Packaging
Carton
31
13
4,5x35
9,2
100
3200
self-drilling anchor DRIVA NYLON
Type
DRIVA NYLON
Code
8704216
Anchor length
Head plug
Dimension
Head screw
(mm)
size (mm)
screw (mm)
size (mm)
Box
Packaging
Carton
30
9,5
3,0x25
8,6
200
1600
39
FIXING ACCESSORIES
ECAV
ECAV
ECAV is a plastic clip with an upper part suitable
for pipes saddle measuring from Ø 4 to 60 mm.
ECAV can be installed with a light-weight anchor.
The characteristics are:
• Made of polypropylene colour grey RAL
7035.
• Flammability rating: UL 94-HB.
• Simple interlocking of the upper part
bypressure.
• The pressure of the inside flexible tabs fix the
pipes in position, leaving room for
longitudinal movements.
• A side hook for connecting other pipe saddles
in series.
ECAV is available in many diameters and
packagings (box or industrial carton).
Type
dc min
dc max
40
Min pipe
Max pipe
Resistance of the top
diameter
diameter
part opening
Box
Carton
Code
dc/min
dc/max
daN
pcs
pcs
ECAV 8
13501008
4
8
10
200
1.200
ECAV 12
13501012
8
12
10
100
1.000
ECAV 16
13501016
12
16
23
75
750
ECAV 20
13501020
16
23
20
50
500
ECAV 25
13501025
20
25
25
50
500
ECAV 32
13501032
25
32
31
25
250
ECAV 40
13501040
32
40
40
20
200
ECAV 50
13501050
40
60
50
15
150
a
b
c
d
FIXING ACCESSORIES
ECLIP
ECLIP
ECLIP is a plastic clip for fixing or protecting
rigid, metric insulating pipes in electrical
installations, on vertical or horizontal surfaces
(from Ø 16 to 50 mm).
ECLIP can be installed with a light-weight anchor.
The characteristics are:
• Made of polypropylene colour grey RAL 7035.
• Flammability rating: UL 94-HB.
• A rounded shape to facilitate pipe
accomodation.
• An elongated hole for adjusting wall fixings.
• A side hook for connecting other pipe clamps
in series.
• A guide for laying in raceways.
ECLIP allows a fast, economic and precise fixing
of plastic pipes in the electrical applications.
ECLIP is available in many diameters and
packagings (box or industrial carton).
Pipe
Width
Box
Carton
diameter
Type
x
Code
(mm)
dc/(mm)
x/(mm)
c/(mm)
s/(mm)
pcs
pcs
ECLIP 16
13502116
16
15
10,5
17,5
16
100
1.000
ECLIP 20
13502120
20
19
12,5
19,5
16
100
1.200
ECLIP 25
13502125
25
24
15,0
11,0
16
100
1.200
ECLIP 32
13502132
32
30
20,2
26,5
16
50
600
ECLIP 40
13502140
40
38
25,0
30,4
16
50
600
ECLIP 50
13502150
50
48
32,5
35,4
16
20
200
c
dc
a
b
c
d
41
FIXING ACCESSORIES
EBAN
EBAN
Metallic perforated banding for fixing PVC
downpipes, parallel conducts and suspended
installations.
EBAN is available in 3 widths, 2 thicknesses
and in three different materials: zinc-plated
steel, stainless steel and copper.
The banding has stamped holes that can be
fixed with M4, M6, M8 thread or with an
anchor.
Packed in box
Dimensions
width x thickness
Ø Internal
Ø Hole
Q.ty
diameter
dimension
roll
Code
(mm)
(mm)
(mm)
mt
Zinc-plated steel
8412001
12 x 0,8
4,95
16
10
Zinc-plated steel
8412002
17 x 0,8
6,95
20
10
Zinc-plated steel
8412003
26 x 1,0
7,95
25
10
Stainless steel
8412102
17 x 0,8
6,95
20
10
Copper
8412011
12 x 0,8
4,95
16
10
Type
TEXTILE BAND
TEXTILE BAND
The textile band, made of polypropylene, is
suitable for floor fixings.
This product is available in a packaging of 10
rolls of 10 meters each.
Dimensions
Q.ty
box
Description
Textile band in rolls of 10 mt
Code
(mm)
pcs
8412120
15x0,8
10 rolls
MANUAL NAIL SETTING TOOL
Impact nail setting tool for fixing conduit
clips to concrete.
Ergonomic handle.
Simple and quick installation without predrilling.
Q.ty
box
Description
manual setting tool
Code
pcs
8412123
1
Steel nail for fixing conduit clips to concrete,
without pre-drilling.
Q.ty
box
Description
Steel nail - 18 mm. length
42
Code
pcs
8412122
200
FIXING ACCESSORIES
ACCESSORIES FOR FIXING
Applications
Characteristics
Benefits
Bundle of cables.
Material: polyamide 6.6 natural and black.
(characteristics on page 19)
Easily releasable and reusable product.
Working temp.: -10°C÷85°C.
Flammable rate: UL 94-V2.
TWIST LOCK
B
A
Code
Code
A
B
Bag
Carton
Natural
Black
(mm)
(mm)
pcs
pcs
1043105
1043106
22,9
5,1 - 7,6
1.000
25.000
1043108
1043109
26,2
7,6 - 10,2
1.000
20.000
1043111
1043112
30,5
10,2 - 12,7
1.000
15.000
1043113
1043114
34,5
13,5 - 16,0
1.000
10.000
1043115
1043116
39,4
17,8 - 20,3
1.000
6.000
Applications
Characteristics
Benefits
Adhesive cable clamps for round cables.
Material: PA 6.6
(characteristics on page 19)
Self adhesive bases with 2 different types of
adhesive foam: rubber base, acrylic base.
The rubber base adhesives: are
particularly
suitable
for
immediate
applications.
The acrylic base adhesive: is instead more
suitable for long period applications and
where a good UV ray resistance is required.
Safe mount of a round cable on the surface
without a screw or bolt.
Easy and fast application thanks to the
adhesive base.
Working temp.: -40°C÷85°C.
Flammable rate: UL 94-V2.
CABLE CLAMPS WITH RUBBER BASE ADHESIVE FOR ROUND CABLES
Code
B
C
D
A
E
Natural
Code
Dimensions (mm)
Bag
Carton
Black
A
B
C
D=E
pcs
pcs
5430 RBE
5431 RBE
10
5
4,9
19
100
10.000
5432 RBE
5433 RBE
12,3
12
12
26
100
5.000
5436 RBE
5439 RBE
16
15
18
26
100
4.000
CABLE CLAMPS WITH ACRYLIC BASE ADHESIVE FOR ROUND CABLES
Code
Code
Natural
Black
Dimensions (mm)
A
Bag
Carton
B
C
D=E
pcs
pcs
10.000
5430 3MVE
10
5
4,9
19
100
5432 3MVE
12,3
12
12
26
100
5.000
5436 3MVE
16
15
18
26
100
4.000
43
FIXING ACCESSORIES
Applications
Characteristics
Benefits
Adhesive cable clamps for flat cables.
Material: PVC.
(characteristics on page 19)
Self adhesive bases with rubber base
adhesive, that are particularly suitable for
immediate applications.
Safe mount of a flat cable on the surface
without a screw or bolt.
Easy and fast application thanks to the
adhesive base.
Working temp.: -10°C ÷ 70°C
Flammability rating: UL 94-V0.
C
ADHESIVE FLAT RIBBON CABLE CLAMPS (PVC)
Code
A
B
Dimensions (mm)
Bag
Carton
Natural
A
B
C
pcs
pcs
AFC-20
20
26
9,6
100
4.000
AFC-25
25
26
9,6
100
5.000
AFC-30
30
26
9,6
50
5.000
CRAMP WITH STEEL NAIL
Applications
Characteristics
Benefits
Cramp with steel nail for round and flat
cable.
Material: HD Polyethilene with high thermic
resistance. (characteristics on page 19).
Nail in hardened and galvanized steel.
The nail in steel allows an easy and fast
installation in all solid surfaces.
The practical rigid packaging allows the
transport of the product without dispersion.
Working temp.: -40°C ÷ 100°C
Flammability rating: UL-94 HB.
CRAMP WITH STEEL NAIL FOR FLAT CABLE - Box
Code
B
44
White
A
Code
Cramp dimension
Cable nr
x section
(mm2)
Nail dimension
Carton
Grey
A x B (mm)
13620001
13630001
5,8x3,5
13620002
13630002
8x2
2x1,5-3x1
2x22
100
13620003
-
10x3,5
3x1,5-3x2,5
2x22
100
2x1
(mm)
pcs
2x22
100
FIXING ACCESSORIES
CRAMP WITH STEEL NAIL FOR ROUND CABLE - Box
Ø
Code
Code
Cramp dimension
Cable nr
Nail dimension
Carton
White
Grey
Ø (mm)
x section (mm2)
(mm)
pcs
13620004
13630004
4
1x1-2x0,5
2x20
100
13620005
13630005
5
2x0,75
2x22
100
13620006
13630006
6
2x1
2x22
100
13620007
13630007
7
2x1-2x1,5
2x27
100
13620008
13630008
8
2x2,5
2x27
100
13620009
13630009
9
3x2,5
2x27
100
13620010
13630010
10
2x4
2x30
100
13620012
13630012
12
3x6
2x35
100
13620014
13630014
14
4x6
2x35
100
13620017
13630017
17
3x10
2x40
50
13620018
-
6
TV antenna
2x30
100
Carton
CRAMP WITH STEEL NAIL FOR FLAT CABLE - Bag
B
A
Code
Code
Cramp dimension
Cable nr
Nail dimension
White
Grey
A x B (mm)
x section (mm2)
(mm)
pcs
13622001
13632001
5,8x3,5
2x1
2x22
100
13622002
13632002
8x2
2x1,5-3x1
2x22
100
13622003
13632003
10x3,5
3x1,5-3x2,5
2x22
100
CRAMP WITH STEEL NAIL FOR ROUND CABLE - Bag
Ø
Code
Code
Cramp dimension
Cable nr
Nail dimension
Carton
White
Grey
Ø (mm)
x section (mm2)
(mm)
pcs
13622004
13632004
4
1x1-2x0,5
2x20
100
13622005
13632005
5
2x0,75
2x22
100
13622006
13632006
6
2x1
2x22
100
13622007
13632007
7
2x1-2x1,5
2x27
100
13622008
13632008
8
2x2,5
2x27
100
13622009
13632009
9
3x2,5
2x27
100
13622010
13632010
10
2x4
2x30
100
13622012
13632012
12
3x6
2x35
100
13622014
13632014
14
4x6
2x35
100
13622017
13632017
17
3x10
2x40
50
13622018
-
6
TV antenna
2x30
100
45
ACCESSORIES
CABLE PULLING DEVICE
Characteristics:
Elematic Cabling Systems offers an extensive range of duct
rods made by fibreglass, polyester and nylon (Perlon)
materials. It has a range of accessories and spare parts which
enables the electricians the widest choice for their
requirements. The new range ELETWIST in twisted polyester is
offered into lengths from 10 to 30 m (diameter 4,5 mm),
extendable with the dedicated accessory, while the nylon
products range complete the selection with lengths from 10 to
25 meters and a 4 mm diameter. The range of fibreglass rods,
with practical winders, offers products of length from 20 to
200 m, with diameters from 3 to 11 mm; All our duct rods are
equipped with interchangeable terminals and can be used
with a wide range of accessories, including the appropriate
repair kit (fibreglass probes) that provide an easy and
economic solution to the problem, allowing the continued
work on site without wasting time.
HOW TO CHOOSE THE RIGHT DUCT ROD:
The main characteristics of the duct rods are their length and
diameter.
FOR THE LENGTH: is recommended to choose a duct rod 3 to
5 meter longer than the duct in which you have to insert the
cables.
FOR THE DIAMETER: it defines the pushing power and, at the
same time, the maximum
distance that can be reached in the duct.
Increasing the diameter size, the reachable distance rises,
decreasing the turning radius
curvature and enabling the easiest cable insertion. It means that
it is very important to choose the right dimension, in order to
get the maximum benefits of fibreglass material.
ADVISED USE
Type
Fibreglass
Fibreglass
Twist
Nylon
46
ø rod
(mm)
3
4,5
6
9
11
4,5
4
ø Pipes
( mm)
16-32
40-60
50-80
63-125
63-150
16-32
20-25
Push
energy
+++
+++
+++
+++
+++
++
+
Introduction
+++
++
++
++
++
+++
+
Turns
min. ø mm.
160
310
400
620
770
100
100
Civil installations
Industrial installation
Break resistance
(kg)
400
1200
2000
4400
6250
250
520
Life
Pulling
Time
resistance
with
starting / ending
junction (kg)
110
170
230
340
500
130
115
+
++
++
++
++
+++
--
Advised
length (m)
3 to 5 meters more
than the tube length
20-30
50-80
40-80
60-120
120-200
15-30
10-25
ACCESSORIES
FIBREGLASS DUCT ROD
“CABLE QUICK”
Applications
• Civil installations.
Characteristics
• Fibreglass Ø 3 mm and length till 30 mt.
• Ideal for ducts with diameter till 32 mm.
• Excellent boost power.
• Min. radius curvature: 160 mm.
• Pulling resistance (with starting and ending,
terminals): 110 kg.
• Breaking strength: 400 kg.
Advantages
• Fast insertion.
• Easy wind up thanks to the practical pulling
grip tool in shockproof material.
• Wide range of accessories (Plus version).
• Intherchangeable thacaded M5 terminals.
FIBREGLASS DUCT ROD “CABLE QUICK”
Code
Ø
Length
Version
Box
(mm)
(m)
13550020
3
20
Standard
pcs
1
13550030
3
30
Standard
1
13551020
3
20
Plus*
1
13551030
3
30
Plus*
1
“CABLE QUICK“ STANDARD - 20 mt
Code 13550020
Cdt
Type
Code
pcs
Spare-fibreglass rod ø 3 mm x 20 m
13560320
1
Starting terminals with eyelet and M5 thread
13570001
1
Flexible starting terminal ø 6 mm with eyelet and M5 thread
13570002
1
Pulling grip for ø 3-6 mm fibreglass rod
13570009
1
Foam lubrificant
Free sample
1
VERSION STANDARD
*Fully accessoried.
“CABLE QUICK“ PLUS - 20 mt
Code 13551020
“CABLE QUICK“ STANDARD - 30 mt
Code 13550030
Cdt
Type
Code
13560330
1
Starting terminal with eyelet and M5 thread
13570001
1
Flexible starting terminal ø 6 mm with eyelet and M5 thread
13570002
1
Pulling grip for ø 3-6 mm fibreglass rod
13570009
1
Foam lubrificant
Free sample
1
Code
pcs
“CABLE QUICK“ PLUS - 30 mt
Code 13551030
Cdt
Code
Cdt
pcs
Spare-fibreglass rod ø 3 mm x 20 m
13560320
1
Starting terminal with eyelet and M5 thread
13570001
2
Flexible starting terminal ø 7 mm with eyelet and M5 thread
13570003
1
Flexible starting terminal ø 10 mm with eyelet and M5 thread
13570004
1
Starting/ending joint M5
13570005
2
Coupling joint
13570006
2
Cable Pulling grip M5 ø 4-6 mm
13570007
Special glue for rods
Pulling grip for ø 3-6 mm fibreglass rod
Foam lubrificant
Type
VERSION PLUS
Type
pcs
Spare-fibreglass rod ø 3 mm x 30 m
Spare-fibreglass rod ø 3 mm x 30 m
13560330
1
Starting terminal with eyelet and M5 thread
13570001
2
Flexible starting terminal ø 7 mm with eyelet and M5 thread
13570003
1
Flexible starting terminal ø 10 mm with eyelet and M5 thread
13570004
1
Starting/ending joint M5
13570005
2
Coupling joint
13570006
2
1
Cable Pulling grip M5 ø 4-6 mm
13570007
1
13570010
1
Special glue for rods
13570010
1
13570009
1
Pulling grip for ø 3-6 mm fibreglass rod
13570009
1
Free sample
1
Foam lubrificant
Free sample
1
47
ACCESSORIES
CABLE QUICK SPARE PARTS
SPARE-FIBREGLASS ROD - PULLING/PUSHING GRIP
Code
Ø
Length
(mm)
(m)
Thread
Box
pcs
13560320
Rod
3
20
M5
13560330
Rod
3
30
M5
1
1
13570009 Pulling for Ø 3-6 mm fibreglass rod
(A)
3
(C)
(B)
STARTING TERMINAL WITH EYELET -STARTING/ENDING JOINT - COUPLING
Code
13570001
Starting terminal (A)
13570005
Starting/ending joint (B)
Coupling joint (C)
13570006
Ø
Thread
Box
(mm)
≤
pcs
6
M5
3
M5
3
-
3
Thread
Box
3
(E)
(D)
(F)
FLEXIBLE STARTING TERMINAL M5
Ø
Code
(mm)
pcs
13570002
(D)
6
M5
2
13570003
(E)
7
M5
2
13570004
(F)
10
M5
2
Thread
Box
CABLE PULLING GRIP M5
Code
Ø Cable
Length
(mm)
(mm)
13570007
4-6
200
M5
1
13570008
6-9
210
M5
1
pcs
SPECIAL GLUE for rods - CABLE LUBRIFICANTS
Code
Weight
Box
(ml)
pcs
3
2
13570010
Special glue (*)
13520000
Lubrificant foam (**)
400
1
13520001
Lubrificant gel (**)
500
1
(*)• Acrylic glue (cyanoacrylate) for repaiging fibreglass duct rods.
• Light viscosity and high resistance.
• Colourless.
• Re-closable and reusable small bottle.
(**)• Lubrificant foam/gel, water base, for favouring the passage of wires and cables in the electrical ducting; it reduces of 80% the friction in
inserting the duct rods and wires on pipes.
• The innovate formula avoids the glue effect, typical of many other products. After its fast evaporation, the component remains allowing the taki
goff the wires even after a long period and a critical temperature as well.
• Working and stocking temperature: -10° C ÷ 50°.
• Chemical inert and non-toxic.
48
ACCESSORIES
FIBREGLASS DUCT RODS
Ø 4,5 ÷ 11 mm with cage
Applications
Characteristics
Avantages
Tertiary and industrial installation.
• Self energetic fibreglass ø from 4,5 to 11
mm and length till 200 mt, complete with
starting and ending terminals.
• High boost power.
• For more technical information, please see
the table et page 47.
• Fast insertion.
• Easy to wind up and to transport, thanks to
the galvanized steel cage with brake on the
hub and handhold.
• Interchangeable threaded terminals.
• Wide range of accessories.
FIBRECLASS DUCT RODS WITH STEEL CAGE
Code
Ø
Length
(mm)
(m)
Thread
Cage
Box
ø (mm)
pcs
13550450
4,5
50
M5
330
1
13550480
4,5
80
M5
330
1
13550640
6
40
M6
550
1
13550660
6
60
M6
550
1
13550680
6
80
M6
550
1
13550960
9
60
M12
630
1
13550912*
9
120
M12
1000
1
13551112*
11
120
M12
1000
1
13551115*
11
150
M12
1000
1
13551120*
11
200
M12
1000
1
* Wheeled version.
49
ACCESSORIES
GLASS FIBRE ROD SPARE
PARTS AND ACCESSORIES
SPARE FIBRE GLASS ROD
Code
Ø
Length
(mm)
(m)
Thread
Box
13560450
4,5
50
M5
1
13560480
4,5
80
M5
1
13560640
6
40
M6
1
13560660
6
60
M6
1
13560680
6
80
M6
1
13560960
9
60
M12
1
13560912
9
120
M12
1
13561112
11
120
M12
1
pcs
STARTING TERMINAL with hole
Code
Ø rod
Thread
(mm)
Box
pcs
13570011
4,5
M5
3
13570016
6
M6
1
STARTING TERMINAL made of light alloy with steel shackle
Code
Ø rod
Thread
(mm)
Box
pcs
13570012
4,5
M5
1
13570017
6
M6
1
13570021
9/11
M12
1
Thread
Box
STARTING ROLLER made of light alloy
Code
Ø rod
(mm)
50
pcs
13570013
4,5
M5
1
13570018
6
M6
1
13570022
9/11
M12
1
ACCESSORIES
STARTING/ENDING THREADED JUNCTION for fiberglass rod
Code
Ø rod
Thread
(mm)
Box
pcs
13570014
4,5
M5
3
13570019
6
M6
1
13570023
9
M12
1
13570025
11
M12
1
COUPLING JOINT for repairing rods
Code
Ø rod
Box
(mm)
pcs
13570015
4,5
3
13570020
6
1
13570024
9
1
13570026
11
1
STEEL CABLE PULLING GRIP with 1 simple eyelet
Code
Ø cables
Length
Box
(mm)
(mm)
pcs
13570027
12-15
460
1
13570028
15-19
500
1
13570029
19-25
520
1
13570030
25-31
580
1
STEEL CABLE PULLING GRIP 1250 mm, with 1-2 simple eyelets
Code
Ø cables
Length
Box
(mm)
(mm)
pcs
13570031
15-20
1250
1
13570032
20-30
1250
1
13570033
30-40
1250
1
13570034
40-50
1250
1
13570035
15-20
1250
1
13570036
20-30
1250
1
13570037
30-40
1250
1
13570038
40-50
1250
1
SPECIAL GLUE for rods
Code
13570039
Nominal capacity
Box
(ml)
pcs
24
1
51
ACCESSORIES
NYLON DUCT RODS 4 mm
Applications
Characteristics
Avantages
• Tertiary and industrial installations.
• Nylon Perlon with ø 4 mm and length till
25 mt.
• High flexibility.
• Pulling resistance (with starting and ending
connections): 115 kg.
• For more technical information see the table
et page 47.
• Efficiency and practical usage.
• Ideal for short duct section.
• Interchangeable threaded M4 terminals.
NYLON DUCT RODS ø 4 mm
Code
Ø
Length
Tensile strength
Box
Nylon
(mm)
(m)
(kg)
pcs
13510210
4
10
115
1
13510215
4
15
115
1
13510220
4
20
115
1
13510225
4
25
115
1
* Other dimensions and types available on request.
Accessories
STARTING TERMINAL M4
Code
Ø
Thread
(mm)
13510001
5
Box
pcs
M4
3
Thread
Box
FLEXIBLE STARTING TERMINAL M4
Code
Ø
(mm)
13510002
52
5
pcs
M4
2
ACCESSORIES
ELETWIST - POLYESTER
DUCT RODS Ø 4,5mm
Applications
Characteristics
Avantages
• Tertiary and industrial installations.
• Duct rod made in twisted polyester ø 4,5
from 10 to 30 meters, complete with starting
and ending terminals;
• High boost power;
- Easy insertion;
• For more technical information, please see
the table at page 47.
• Power and flexibility;
• Provided with a pulling grip to make easier
the traction;
• Interchangeable threaded M5 terminals
• Possibility to join two rods with the coupling
joint.
ELETWIST DUCT RODS ø 4,5 mm
Accessories
Code
Ø
Length
Tensile strength
Box
Nylon
(mm)
(m)
(kg)
pz.
13530410
4,5
10
130
1
13530415
4,5
15
130
1
13530420
4,5
20
130
1
13530425
4,5
25
130
1
13530430
4,5
30
130
1
STARTING TERMINAL M5
Code
Ø
Thread
(mm)
13530001
5
Box
pz.
M5
3
Thread
Box
FLEXIBLE STARTING TERMINAL M5
Code
Ø
(mm)
13530002
5
pz.
M5
2
Thread
Box
COUPLING JOINT THREADED M5
Code
Ø
(mm)
13530003
5
pz.
M5
3
STEEL CAGE FOR ELETWIST ø 4,5 mm
Code
13530004
Ø
Ø
Box
(mm)
cage (mm)
pz.
5
280
1
53
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising