PER-C40C

PER-C40C
Mini PCI Module
PER-C40C
Notice
This guide is designed for experienced users to setup the
system in the shortest time.
Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working
on it. Do not make connections while the
power is on, because a sudden rush of power
can damage sensitive electronic
components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap
at all times. Place all electronic components
on a static-dissipative surface or in a
static-shielded bag when they are not in the
chassis
Part No. 2007C40C10
Printed in Taiwan
April. 2005
PER-C40C Quick Installation Guide
1
Mini PCI Module
PER-C40C
A Message to the Customer
Fist of all, thank you for purchasing PER-C40C Mini PCI
module. This Quick Installation Guide will help you on the
process of the installation. Please read it thoroughly before
you start to install it. The product comes with a two year
limited warranty except for improper use. Therefore, we
strongly suggest that you read and refer to the Quick
Installation Guide before any installation. You may visit
AAEON website for the latest version of the instruction guide.
Please refer to Http://www.aaeon.com
PER-C40C Quick Installation Guide
2
Mini PCI Module
PER-C40C
Product Warranty
AAEON Customer Services
All products in AAEON are designed according to the strictest
specifications to ensure that these products will retain reliable
performance in typical industrial environments. Whether
your purchase from AAEON is made for use in the laboratory
or the factory facility, you can be assured that every purchase
in AAEON will provide reliability and stability of operation.
Your satisfaction is our primary concern. Here is a guide for
AAEON's customer services. To ensure you get full benefits
of our services, please follow the instructions below step by
step.
Technical Support
We want you to get the maximum performance from your
products. If you run into technical difficulties, we will always be
here for you. For the most frequently asked questions, you
can easily find solutions in your product documentation. The
guide is specific in detail so please refer to it first. Therefore,
we suggest strongly that you can read it before asking for
customer service over the phone. If you still cannot find the
answer, gather all questions you can think of and have the
product at hand before giving a call to your dealer. All dealers
of AAEON are well-trained and ready to provide you as much
PER-C40C Quick Installation Guide
3
Mini PCI Module
PER-C40C
supports as they can. Based on the customer service
problems we have encountered, most of them are minor and
able to be easily solved over the phone. In addition, free
technical support is available from AAEON engineers during
office hours. We are always pleased to give advice regarding
any installation and operation for AAEON products.
PER-C40C Quick Installation Guide
4
Mini PCI Module
PER-C40C
Ordering Information
PER-C40C-A10
Mini PCI 2-Port RS-232 Module Rev.A1.0
PER-C40C-A10-01
Mini PCI 4-Port RS-232 Module Rev.A1.0
2 RS-232 Ports
PER-C40C-A10
4 RS-232 Ports
V
PER-C40C-A10-01
V
Packing List
1 PER-C40C Mini PCI Module
2 or 4 RS-232 Cable
1 CD-ROM for QIG (in PDF format) and drivers
PER-C40C Quick Installation Guide
5
Mini PCI Module
PER-C40C
Content
A Message to the Customer .............................................. 2
Product Warranty ............................................................. 3
Ordering Information ........................................................ 5
Packing List ..................................................................... 5
1.1 Features .................................................................... 7
1.2 Specifications ............................................................. 7
1.3 Connector Locations ................................................... 8
1.4 Mechanical Drawing.................................................... 9
1.5 Connector List .......................................................... 10
1.6 Four 5x2 Box Header (CN1,CN2, CN3,CN4) ............... 10
1.7 Driver Installation and Module set up .......................... 11
PER-C40C Quick Installation Guide
6
Mini PCI Module
PER-C40C
1.1 Features
Supports 2 or 4 RS-232 ports
1.2 Specifications
• Form factor
Mini PCI Type IIIA
(50.8mm x 59.6mm)
UART Chipset
OXFORD OXmPCI952 or
OXmPCI954
Power Request
+3.3V
Operation Temp.
0°C~60°C
PER-C40C Quick Installation Guide
7
Mini PCI Module
PER-C40C
CN2
CN1
2
1
CN4
CN3
CN2
CN1
1.3 Connector Locations
2
1
CN4
CN3
2
1
2
1
U2
1
U1 U3
1
U5
1
1
U4
IC1
1
MPCI1
1
PER-C40C Quick Installation Guide
8
Mini PCI Module
PER-C40C
50.95
51.44
37.47
9.53
23.50
1.4 Mechanical Drawing
CN2
CN1
6.50
1.00
CN4
CN3
38.29
2
1
2
1
2
1
2
1
U2
1
U1 U3
1
1
20.00
O4.00
U5
1
20.00
U4
IC1
1
4.00
MPCI1
1
59.75
0.00
3.75
5.80
0.00
PER-C40C Quick Installation Guide
9
Mini PCI Module
PER-C40C
1.5 Connector List
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Connectors
Label
CN1
Function
COM1: RS-232 Serial Port
Connector
CN2
COM2: RS-232 Serial Port
Connector
CN3
COM3: RS-232 Serial Port
Connector
CN4
COM4: RS-232 Serial Port
Connector
1.6 Four 5x2 Box Header (CN1,CN2, CN3,CN4)
Pin
Signal
Pin
Signal
1
DCD
2
SIN
3
SOUT
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI
10
N.C
PER-C40C Quick Installation Guide
10
Mini PCI Module
PER-C40C
1.7 Driver Installation and Module set up
The PER-C40C supports Linux and Windows XP platforms. It comes
with a CD-ROM that contains all drivers and utilities that meet your
needs. When your platform is Windows XP please following the
sequence below to install the drivers, when your system is Linux,
you don’t need to install the driver just process the Mini PCI RS-232
module set up in Linux
Installing Mini PCI RS-232 drivers in Windows XP
Once the card is installed and the computer is restarted, Windows
will detect the board and attempt to load the drivers for it.
1. Windows will detect a “PCI Serial Port”. Select “Install
from a list or specific location (Advanced)” as the shown of
figure 1. Click “Next.”
Figure 1
2. Select “Search for the best driver in these locations.”, next
select “Include this location in this search:” and then click
PER-C40C Quick Installation Guide
11
Mini PCI Module
PER-C40C
“Browse” to open the “CD-ROM/Driver/PER-C40C Mini
PCI RS-232 Module driver V1.0 for Windows” file as
shown in figure 2 . Click “Next.”
Figure 2
3. Windows has found an updated driver for this device as
shown in figure 3. Click “Next.”
Figure 3
4. The “Completing the Found New Hardware Wizard” dialog
PER-C40C Quick Installation Guide
12
Mini PCI Module
PER-C40C
Appears as shown in figure 3, click “Finish.”
5. Repeat the above process for the second, third, fourth,
fifth AAEON PCI Communications Port.
6. Please re-start your Windows.
Finalizing Mini PCI RS-232 module settings
Check your Windows System/Device Manager to confirm proper
installation of Mini PCI RS-232 drivers:
Multifunction adapters
AAEON OX16PCI954 PCI UARTs
AAEON OX16PCI95x PCI bridge
Ports(COM & LPT)
4-port Mini PCI module will show 4 AAEON PCI
Communications Port and 2-port Mini PCI module will show 2
AAEON PCI Communications Port as the figure 4 shows 4
ports Mini PCI module
Figure 4
PER-C40C Quick Installation Guide
13
Mini PCI Module
PER-C40C
Mini PCI RS-232 module set up in Linux
If the module is a 4-port Mini PCI, you don’t need to proceed with the
set up process, you can use it directly. 2-port Mini PCI module
please use following the sequence below to set up the module.
1. Open the Terminal screen and make a
cat /proc/tty6/driver/serial command to check your
COM port settings.
As the screen showing, use 16550A to be UART prefix is
the system COM ports, and we can see this system have
2 COM ports, leave each other ttyS0, ttyS1.
2. Make lspci -v command to find OXmPCI952 IRQ and I/O
address
PER-C40C Quick Installation Guide
14
Mini PCI Module
PER-C40C
As the screen showing, we can find ”Serial controller:
Oxford Semiconductor Ltd:” this alphabetic string then to
see the next line have IRQ number and the next have
I/O address
3. Open the file: /etc/rc.local and add two commands
setserial /dev/ttySX1 port IOADDR1 irq Y uart 16950 baud_base 115200
setserial /dev/ttySX2 port IOADDR2 irq Y uart 16950 baud_base 115200
In above command line X1,X2 is the COM port number
and it must be beyond beforehand. So in this case X1 is 4,
X2 is 5. Besides, Y is IRQ number . Finally, we can set the
I/O address individually.
setserial /dev/ttyS4 port 0xe000 irq 9 uart 16950 baud_base 115200
setserial /dev/ttyS5 port 0xe100 irq 9 uart 16950 baud_base 115200
4.
Please re-start your computer.
5. Make cat /proc/tty/driver/serial command to see if the
display is as following, if yes you already set it up.
PER-C40C Quick Installation Guide
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising