Atrust m220
Zero Client
Atrust m220
Atrust m220 is a zero client designed as an endpoint of a shared resource system, such as a MultiPoint Server™ or
Userful MultiSeat™ Linux system. The solution enables a host server to power multiple and independent stations.
Each station only consists of one station hub (zero client) with a keyboard, mouse, and monitor connected, allowing
multiple users to share the computing power of one single server. Simply through an Ethernet connection, the server
provides each station user with a familiar and independent Windows® experience.
2
3
1
4
6
5
1 Power LED
6 LAN Port
2 Microphone Port
7 USB Port
3 Headphone Port
8 USB Port
Indicates the status of power.
Connects to a microphone.
Connects to a set of headphones or a speaker
system.
4 DC IN
Connects to an AC adaptor.
5 Power Switch
Press to turn on/off the client.
7
9
10
8
Connects to a host server through a Gigabit switch.
Connects to a mouse.
Connects to a keyboard.
9 VGA Port
Connects to a monitor.
10 Kensington Lock Slot
Attach your m220 to a permanent object with the
Kensington slot and a security cable.
Atrust m220 Features
Low total cost of ownership
Additional computing access is as simple as adding more I/O
devices. The total cost of ownership is then drastically
reduced.
Slim and quiet design
m220 is feather light weighing only 156g. The slim design
allows it to be mounted to the back of a monitor with a VESA
mount. Together with its fanless design, m220 helps create a
simple and noiseless workplace environment.
Simple setup
LAN-based connection
Easy management and maintenance
m220 connects to the host server through the Ethernet
interface. This connection type exceeds the length limit of a
USB connection and provides more flexibility in the layout of
a MultiPoint Server system.
Just attach a keyboard, mouse, and monitor to your m220,
connect it to the host server, and then perform the initial
setup. A station is ready for use right away.
Since all computing tasks are performed on a server, all
hardware and software issues are significantly reduced on the
client side. All user management, software installations, system
management, and upgrades are done on a single server.
Atrust m220
System
Processor
SOC DL-125
Graphics
Maximum resolutions
Supports up to 1280 x 1024 / 1440 x 900
I/O Interfaces
Video
VGA-type video output (D-sub 15)
I/O ports
1 x VGA
2 x USB A type (for keyboard and mouse)
1 x Gigabit Ethernet (for the host server)
1 x headphone
1 x microphone
1 x DC IN
1 x Kensington lock slot
Networking
Host connection
10/100/1000Mb Ethernet
Dimensions / Weight
Dimensions
(W) 120 x (D ) 80 x (H) 28mm
Weight
156g (approximate, AC adaptor excluded)
Environment
Cooling
Fanless
Operating noise
No noise
Operating temperature
0℃ ~ 35℃
Non-operating temperature
-30℃ ~ 60℃
Operating humidity (Rh)
10% ~ 90% (non-condensing)
Non-operating humidity (Rh)
5% ~ 95%
AC Adaptor
Operating / Output voltage
100 ~ 240 VAC / +5V DC
Rated line frequency
50 ~ 60 Hz
Rated output current (max)
2A
Energy Consumption
Idle power
Around 3.4W
Server OS Support
Windows® MultiPoint™ Server 2011
Userful MultiSeat™ Linux 2011
Regulatory
CB, FCC, CE, BSMI, NRTL
© 2011 Atrust Computer Corp. The information contained herein is subject to change without notice. Atrust shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows are trademarks of the Microsoft group of companies. To learn more, visit www.Atrustcorp.com.
Option
VESA Mount Kit (W) 114 x (D) 60 x (H) 6 mm
2011 V.02
Atrust Computer Corp.
3F, 361 Fusing 1st Rd., Gueishan, Taoyuan County 333, Taiwan
T.+886-3-3288837
F.+886-3-3288973
sales@atrustcorp.com
www.atrustcorp.com
R35471
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising