MONITOR Print - Printing from a BYOD laptop or tablet. File

MONITOR Print - Printing from a BYOD laptop or tablet. File
MONITOR Print - Printing from a BYOD laptop or tablet.
Web Print
RECOMMENDED WIFI NETWORK = UNITEC E-LEARN
Step 1 – In a web browser address bar, enter the Monitor (MPrint) website:
http://mprint.unitec.ac.nz
Step 2 - Login using your Unitec login and password.
1. To print a document that you may have found a link to on the internet, open the
document, right click the link and copy the URL. If the url does not highlight (or your
device doesn’t have a mouse), select all (highlights URL), then select copy.
2. In the URL field (picture above) left click to paste the link and click Submit. This URL
should look something like www.somewhere.com/some_document.pdf
3. The properties of your job are displayed beside Current attributes. To change these for
the job, highlight the job, then click the Change Job Attributes button at the bottom left.
Note: The default is Black & White, Two-Sided. In Current Activity (bottom tab) it will
show in the status column that your job is processing. Once it has changed to Waiting
for release you can swipe your ID card at a printer and release your print job.
4. Remember to log out (top left).
Step 3 – Choose a print option.
There are 3 ways to print, choose one and follow the instructions below for that option.
Option 1:
Option 2:
Option 3:
File Print
Web Print
Send Email Attachment
Send Email Attachment
Browse a file on your device and select
To print a webpage or document with the URL
Use email to print an email or email attachment
File Print
1. Click the Select files button.
2. Use the browser that opens to choose the file you want to print. Click the file or select
multiple by holding Ctrl on the keyboard, then click Open.
3. The properties of your job are displayed beside Current attributes. To change these for
the job, highlight the job, then click the Change Job Attributes button at the bottom left.
Note: The default is Black & White, Two-Sided. In Current Activity (bottom tab) it will
show in the status column that your job is processing. Once it has changed to Waiting
for release you can swipe your ID card at a printer and release your print job.
4. Remember to log out (top left).
1. Enter your email address (if not already visible), to register for sending print jobs.
2. Change the Current attributes of the print job if required by pressing the Change Job
Attributes button at the bottom left. Note: The default is Black & White, Two-Sided.
3. In your email system (eg; Outlook) create an email addressed to mprint@unitec.ac.nz
4. The attachment will be processed for printing if included. If no attachment exists, then
the body of the email will be processed for printing. Note: If you want both the email
message and attachment, send two emails: one with the attachment, and one without.
5. Once you have sent the email to mprint, you can swipe your ID card at a copier and
release your print job.
6. Remember to log out (top left).
Ask IMS Help Desk 815-4321 ext 8484 askims@unitec.ac.nz
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising