PDWM4350U PDWM4360U
LCD
PDWM4350U
PDWM4360U
Thank you for purchasing this Wireless Microphone System. Please
1.FOREWORD.................................................................................2
read the instructions carefully to ensure proper use and operation of the product.
Also, keep the instructions for future reference.
2.INTRODUCTION...........................................................................2
This professional wireless microphone system operates on high-efficiency,
3.SYSTEM FEATURES.....................................................................2
low-consumption discharging techniques. Performance features include
independent developed mobile frequency compression, expander circuitry,
4.SYSTEM TYPE..............................................................................2
image frequency limiting circuits, a multiple checked silent and noise-free
circuit system, antenna diversity receiving circuit & switch impact noise
5.FOUR CHANNEL RECEIVER FEATURES.........................................3
defeat circuits. Resis reverberation circuit and changed output control.
Passes Q.C. code standards.
6.TRANSMITTER FUNCTION & FEATURES......................................4-5
SYSTEM FEATURES
7.TRANSMITTER BATTERY INSTALLATION........................................6
8.BODYPACK TRANSMITTER CONNECTION......................................7
9.SYSTEM CONNECTIONS...............................................................8
10.TROUBLE SHOOTING...................................................................9
11.SPECIFICATIONS....................................................................9-10
12.OPTIONAL ACCESSORIES..........................................................10
System Composition
PDWM4350U
Receiver
PDWM4360U
Receiver
(2) Handheld Mics
(4) Handheld Mics
(2) Belt-Pack Transmitters
AC Power Adapter
(2) Lavalier Mics
Rack Mount Kit
(2) Headset Mics
Batteries
All UHF Series Systems offer a variety of exceptional features including:
1. Multiple System Use: Up to several UHF systems can be used in the same
performance space. Each system must be set at a different frequency.
(Frequency marked on the back of the receiver).
2. Simultaneous Output Use: Unbalanced 1/4" phone plug and balanced XLR
output connectors may be used simultaneously to different external devices.
3. Range: UHF Series transmitters will work at a distance of up to 50 meters
(about 164 ft.) from the receiver.
4. Noise Squelch: Squelch circuit analyzes signal strength and quality so that it
can reduce the likelihood of noise burst due to environmental RF (Radio
Frequency) noise.
5. Low Battery Warning Light: A red light on the body-pack and hand-held
transmitters warns the user that there is less than one hour of battery life
remaining.
AC Power Adapter
Rack Mount Kit
Batteries
1
2
FOUR CHANNEL RECEIVER FEATURES
1
8
ON
6
2
5
6
5
5
6
5
6
2
4
3
5
ON
6
1
7
3
4 10 7
3
4 10
10 4
3
7 10 4
3
7
Front Panel
8
11
9
9
9
9
12
8
Rear Panel
1.Power Button: Power ON/OFF the receiver.
2.Power Indicator: Indicate the power ON/OFF.
3. LCD Information Display: Show the receiver frequency channel ect.
4.Down Function Button: Sets channel data.
5.Up Function Button: Sets channel data.
6."AF"Audio Level Indicator: Indicate the wireless system audio signal level.
7."RF" signal Indicator:It glows when the Receiver receive RF signal from
Transmitter.
8.Antenna.
9.XLR Balanced Output Jack: Connect the audio cable from this jack to
the input port of amplifier, mixer.
10.Volume Knob: Adjust the volume output of receiver.
11.1/4" Audio Output Jack: Connect the audio cable from this jack to the
input port of amplifier, mixer.
12. Power Jack: Connect the AC/DC adapter to receiver.
3
1. Grille: Protects the cartridge and help reducing the breath sounds and wind
noise.
2. LCD Information Display: Show the transmitter frequency channel ect.
3.Down Function Button: Sets channel data.
4.Up Function Button: Sets channel data.
5.Power and Audio Mute Switch.
6.Battery Cover: Open it to install the battery.
4
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Handheld Microphone: Open the battery cover,
Insert the supplied batteries into battery jar in polarity and cover the battery
cover.
4
1
5 2
3
6
Push down
to open.
7
8
9 10
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip: Attach the transmitter to the belt.
4. Audio Input Jack: it is suitable for lavalier system/headset system.
5. Low Battery Indicator: Red light glows when it is lack of power and should
renew the battery.
6. LCD Information Display: Show the transmitter frequency channel ect.
7. Gain Adjusting Volume: Adjust the transmitter audio input gain.
8.State Setting Switch: Set the using state of lavalier system(L)/headset
system(H) /guitar system(G).
9.Up Function Button: Sets channel data.
10.Down Function Button: Sets channel data.
2. Battery Installation of Bodypack Transmitter:Push open the battery cover,
Insert the supplied batteries into battery jar in polarity and close the battery
cover.
Push down
to open.
5
6
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connect the connecter of supplied
lavalier microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless lavalier system(L).
2. Headset Microphone Connection: Connect the connecter of supplied
headset microphone to the connecting jack of transmitter(shown as below)
Set the transmitter work state in wireless headset system(H).
SYSTEM CONNECTION
1. Receiver Power Connection: Connect the DC connector of supplied AC/DC
adapter into the DC power input of receiver. Plug the AC input connecter into an
AC120/60Hz or AC220V/50Hz outlet. (Shown as below)
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown
as below)
3. Audio Connection: Connect the corresponding output of receiver by supplied
1/4" phone jack audio cable or your XLR cable to the input of power amplifier,
mixer.
3.Guitar Cable Connection: Connect the connecter of supplied guitar cable
to the connecting jack of transmitter and the other connecter to guitar(shown
as below), set the transmitter work state in wireless guitar system(G).
7
8
13-15
1000mA
394MM X 205MM X 52MM
X2
7
238MM X 50MM X 50MM
X2
673
697.975
7
164
50
8
100MM X 65MM X 30MM
9
10
PDWM4350U
PDWM4360U
UHF Wireless Microphone System with (2) Handheld Mics, (2) Belt Pack
Transmitters, (2) Lavalier Mics and (2) Headset Mics, Adjustable Frequencies
Wireless Microphone System, UHF Quad Channel, 4 Handheld Microphones,
Rack Mountable
UHF Band Receiver System
Quad Frequency Channel Design (Channel 1, 2, 3, 4)
Broad Frequency Response Range & Low Distortion
High Signal/Noise Ratio Performance
RF Signal & AF Signal LED Indicators
LCD Digital Display with Channel & Frequency Readout
Independent Channel Adjustable Volume Controls
Easy-to-Use Touch Button Controls
Detachable Dual Antennas
Rack Mountable System
UHF Band Receiver System
Quad Frequency Channel Design (Channel 1, 2, 3, 4)
Broad Frequency Response Range & Low Distortion
High Signal/Noise Ratio Performance
RF Signal & AF Signal LED Indicators
Radio Frequency and Audio Frequency
LCD Digital Display with Channel & Frequency Readout
Independent Channel Adjustable Volume Controls
Easy-to-Use Touch Button Controls
Detachable Dual Antennas
Rack Mountable System
Includes (4) Handheld Microphones
System Receiver:
RF Frequency Range: 673-698MHz
Image & Spurious Rejection: >70dB
Receiving Sensitivity: -105dBm
Signal/Noise Ratio: >85dB
Border Upon Channel Rejection: >70dB
T.H.D.: <0.5%
Audio Output Level: 0-300mV
Power Requirements: 13-15V DC nominal 1000mA
Dimensions: 39.4 x 20.5 x 5.2cm
Handheld Mics:
Frequency Range: 673-698MHz
RF Output: 10dBm
Modulation Type: FM
Max Deviation: 40KHz
Spurious Emission: >55dBc
Power Requirements: 2 x AA (1.5V)
Dimensions: 23.8 x 5 x 5cm
System Receiver:
RF Frequency Range: 673 - 697.975MHz
Image & Spurious Rejection: >70dB
Receiving Sensitivity: -105dBm
Signal/Noise Ratio: >85dB
Border Upon Channel Rejection: >70dB
T.H.D.: <0.5%
Audio Output Level: 0-300mV
Power Requirements: 13-15V DC nominal 1000mA
Dimensions (L x W x H): 15.51'' x 8.07'' x 2.04''
Microphones:
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Frequency Stability: 0.002%
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered: Requires 2 x 'AA' Batteries
Body-Pack Transmitters:
Frequency Range: 673-698MHz
RF Output: 10dBm
Modulation Type: FM
Max Deviation: 40KHz
Spurious Emission: >53dBc
Power Requirements: 2 x AA (1.5V)
Dimensions: 10.5 x 6.5 x 3cm
11
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising