waterproof digital depth gage digital depth gage

waterproof digital depth gage digital depth gage
WATERPROOF DIGITAL DEPTH GAGE
IP67
WATERPROOF
IT IS NECESSARY TO SET
ZERO AFTER POWER ON EACH TIME
1149-150
IP67 dust/waterproof
Resolution: 0.01mm/0.0005"
Button function: zero, on/off, mm/inch, ABS/REL, hold
Battery CR2032
Made of stainless steel
L
(mm)
Range
Accuracy
L
a
b
d
1149-150
0-150mm/0-6"
±0.03mm
240
6
16
100
1149-200
0-200mm/0-8"
±0.03mm
290
6
16
100
1149-300
0-300mm/0-12"
±0.04mm
390
6
16
150
a
b
d
Code
DIGITAL DEPTH GAGE
DATA
OUTPUT
L
a
b
d
1141-150A 0-150mm/0-6"
±0.03mm
230
6
14.5
100
1141-200A 0-200mm/0-8"
±0.03mm
280
6
14.5
100
1141-300A 0-300mm/0-12"
±0.04mm
380
6
14.5
150
1141-500A 0-500mm/0-20"
±0.05mm
585
7
15
150
4
b
L
Range
d
(mm)
Accuracy
Code
41
1141-150A
a
Resolution: 0.01mm/0.0005"
Buttons: on/off, zero, mm/inch
Automatic power off, move the digital unit to turn on power
Battery CR2032
Data output
Made of stainless steel
Optional accessory: data output system(code 7306-20,
7302-SPC1A/SPC1B, 7305-SPC2)
WIRELESS DATA TRANSFER SYSTEM
APPLICABLE FOR
OTHER BRANDS
Code
Description
7306-1
receiver
(with USB cable)
7306-20
transmitter
module
digital calipers and
digital depth gages
7306-30
transmitter
module
digital micrometers
(except 3108
and 3109)
Applicable products
receiver
7306-1
digital indicators
7306-40
transmitter
module
digital protractor
transmitter
7306-20
CONNECTION: one receiver can be connected to multi transmitters.
receiver (7306-1)
transmitter
(7306-40)
USB port
DATA COLLECTION:
1) Single collection: press the read button once to
collect the reading from measuring tool once.
2) Multi collection: press the read button once to
start collecting readings from measuring tools
continuously, press the button again to stop
collecting. Total collection times and interval
time can be adjustable.
read button
maximum transmission distance 100m
transmitter (7306-20)
transmitter
(7306-30)
measuring tools code A, B, C
DISPLAY: data can be input to
Excel as keyboard signal.
1
1
All data are displayed in the same column.
Each measuring tool can be coded
such as A, B, C, etc.
DATA OUTPUT CABLE
7302-SPC1A
7302-SPC1B
7302-SPC2A
7302-SPC3A
7302-SPC4
Connect to USB port of computer
Without software, data can be input as
keyboard signal to Excel, Word, etc.
Press the red button or foot switch (optional) to input data
Excel
red button
USB port
foot switch is optional
7304-2
Code
Description
Remark
7302-SPC1A
cable (length 2.5m)
for digital calipers and digital depth gages
7302-SPC1B
cable (length 2.5m)
for digital calipers and digital depth gages
7302-SPC2A
cable (length 2.5m)
for digital micrometers
7302-SPC3A
cable (length 2.5m)
for digital indicators
7302-SPC4
cable (length 2.5m)
for digital calipers 1103 series
7304-2
型号
foot switch with cable
(length 1.5m)
digital protractor
optional
1
2
RS232 DATA OUTPUT CABLE
USB power port
7305-SPC1A
automatic judgment
by setting tolerance
7305-SPC3
test result display (maximum value, minimum value,
total quantity of workpiece, quantity of passed and not passed,
quantity of exceed upper tolerance and exceed lower tolerance)
foot switch (optional)
7304-2
red button
RS232 port
foot switch is optional
manual
sampling
automatic
sampling
set auto sample interval and tolerance
Signal
Manual sampling and automatic sampling
Press manual sampling button in software or red button on cable or foot switch once
to collect the reading from measuring tool once
Can be used in Windows Hyperterminal
Supplied with software
Voltage required: 5-10V
Cable length 2.5m
Optional accessory: foot switch (code 7304-2, cable length 1.5m)
digital indicators
7305-SPC1A
3
7305-SPC2
digital calipers and digital depth gages
7305-SPC3
digital micrometers
1
2
DATA
3
4
5
VDD
GND
Applicable products
Code
7304-2
1
foot switch with cable (length 1.5m)
digital protractor
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising