INSITE 8.1.2 Features Notes

INSITE 8.1.2 Features Notes
INSITE 8.1.2 Features Notes
The latest INSITE information can be found on the website at http://insite.cummins.com
For technical support, please send an email to servicetoolsupport@cummins.com or call
800-433-9341, Option 2 within the U.S. Outside the U.S call 812-377-8136, Option 2.
To locate the nearest distributor, visit the Distributor locator.
Table of Contents
1
2
3
4
5
6
7
8
9
General Information ........................................................................................................................... 2
1.1
Upgrade capability ........................................................................................................................ 2
New Base Features ........................................................................................................................... 2
2.1
Windows 10 now supported ......................................................................................................... 2
2.2
Quick Access to Features and Release Notes Documents ............................................................ 2
2.3
Expired license notification ........................................................................................................... 2
2.4
PowerSpec..................................................................................................................................... 2
2.5
Cummins Remote Desktop Help ................................................................................................... 2
2.6
ECM Code Search .......................................................................................................................... 2
2.6.1 Save feature ................................................................................................................................. 2
2.6.2 Save from network drive.............................................................................................................. 3
New Diagnostic Tests ........................................................................................................................ 3
New Advanced ECM Data ................................................................................................................ 3
4.1
Stop Start Service Inhibit............................................................................................................... 3
New Features and Parameters ........................................................................................................ 3
5.1
Predictive Cruise Maximum Offsets.............................................................................................. 3
5.2
Cruise Control On Off Switch ........................................................................................................ 3
5.3
Adaptive Cruise Usage Demand.................................................................................................... 3
5.4
Inducement Timers ....................................................................................................................... 3
5.5
Stop Start Battery Management ................................................................................................... 4
5.6
Air Intake Restriction Diagnostics and Derate .............................................................................. 4
Languages Supported: ...................................................................................................................... 4
Operating System Support................................................................................................................ 5
Recommended PC Requirements ................................................................................................... 5
Minimum PC Requirements .............................................................................................................. 5
1
1 General Information
1.1 Upgrade capability
Upgrade from INSITE 8.1.1 or 8.1.1 SP1.
2 New Base Features
2.1 Windows 10 now supported
Full INSITE support for PC’s utilizing the Microsoft Windows 10 operating system is
now available.
2.2 Easy Access to Features and Release Notes Documents
Feature and Release notes are now accessible from links in the INSITE Help menu.
2.3 Expired license notification
The first time that INSITE is launched after the license has expired, a message will be
displayed that the license has expired. INSITE can still connect to an ECM, but it will
be in read only mode.
2.4 PowerSpec
This feature has been removed from the Tools menu.
2.5 Cummins Remote Desktop Help
This feature has been added to the Help menu. This link (www.LogMeIn123.com) will
open an internet location that will be needed when an INSITE Electronic Tools
Support representative would like to remote into your computer.
2.6 ECM Code Search
2.6.1 Save feature
This feature was changed to allow the same ECM code to be saved more than once
in a calendar day.
2
2.6.2 Save from network drive
This feature was changed so that ECM codes found on a network drive can be saved
to the Calibration Workspace.
3 New Diagnostic Tests
No New Diagnostic Tests have been implemented.
4 New Advanced ECM Data
NOTE: These will only be displayed if they are supported by the calibration.
4.1 Stop Start Service Inhibit
This feature allows the automatic stop start functionality of a vehicle to be temporarily
disabled.
5 New Features and Parameters
NOTE: These will only be displayed if they are supported by the calibration.
5.1 Predictive Cruise Maximum Offsets
In uphill and downhill grades, this feature adjusts the cruise control within the speed
range set by the Maximum Positive and Maximum Negative offset values.
5.2 Cruise Control On Off Switch
This feature allows the Cruise Control On/Off Switch to be used as an input to the
Cruise Control feature.
5.3 Adaptive Cruise Usage Demand
This feature enables the Usage Demand switch.
5.4 Inducement Timers
This feature monitors the amount of time the engine has been at the different levels of
inducement as well as being able to set an offset of the collective times.
3
5.5 Stop Start Battery Management
This feature provides the ability to select the number of battery sensors installed in
the Stop-Start system.
5.6 Air Intake Restriction Diagnostics and Derate
This feature will allow a torque derate to be set when this diagnostic feature is active.
6 Languages Supported:
English
Limited Translation:
Chinese (Simplified)
Czech
Danish
Dutch
Finnish
French
German
Greek
Indonesian
Italian
Hungarian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Spanish
Swedish
Turkish
4
7 Operating System Support
Windows® 7 32-bit and 64-bit
Windows® 8 32-bit and 64-bit
Windows® 8.1 32-bit and 64-bit
Windows® 10 32-bit and 64-bit
NOTE: INSITE 8.1 is not supported on the following Operating Systems:
Windows® 7 Starter Edition or Basic Edition
Windows® 8 RT Edition
Windows® 8.1 RT Edition
8 Recommended PC Requirements
COMPONENT
REQUIREMENTS (Recommended for new hardware purchases)
Platform:
Operating System:
Processor:
RAM Memory:
Hard Drive:
Media Device:
Display:
Keyboard:
Pointing Device:
IBM or 100% Compatible
Windows® 8 32-bit
2.1 GHz or greater dual-core
4 GB or greater
2 GB or greater available disk space
Dual Layer - Double Density DVD-ROM
Minimum Resolution 1024 x 768
101 Key Enhanced
Windows® Compatible Device
PC’s that will be used for Virtual College training will require multimedia and
sound capability
Adobe Acrobat Reader v9.0 and later
Windows® Compatible
Multimedia:
Other Software:
Printer:
Internet
Connection:
Available Ports:
DSL / Broadband high-speed
Two USB 2.0 Ports
9 Minimum PC Requirements
COMPONENT
REQUIREMENTS (for minimum performance)
Platform:
Operating System:
Processor:
RAM Memory:
IBM or 100% Compatible
Windows® 7 32-bit
2 GHz
2 GB
5
Hard Drive:
Media Device:
Display:
Keyboard:
Pointing Device:
Multimedia:
Other Software:
Printer:
Internet
Connection:
Available Ports:
2 GB available disk space
DVD-ROM
Minimum Resolution 1024 x 768
101 Key Enhanced
Windows® Compatible Device
Any Windows® Compatible Sound Device
Adobe Acrobat Reader v9.0 and later
Windows® Compatible Device
DSL / Broadband high-speed
See datalink adapter manufacturer for port specifications
JEM Created: INSITE 8.1.2 October 2015
Document 6733-NEWF-07 Version 2.0.0
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising