PRELIMINARY Tech Spec for the OneLINK Bridge

PRELIMINARY Tech Spec for the OneLINK Bridge
Tech Spec
OneLINK Bridge
HDBaseT Camera Interface
North America: 999-9595-000
Europe and UK: 999-9595-001
Australia and New Zealand: 999-9595-009
Features
n
n
n
n
n
n
n
n
n
Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
Incorporates Vaddio’s market-leading AV Bridge functionality, connecting professional AV equipment to PC
applications via USB 3.0 media stream delivery
Simple, clutter-free camera installation – power, control, video, and streaming over one Cat-5e or better cable
Extends installation distance for HDBaseT cameras up to 100 m (328 ft)
Simultaneous IP streaming (RTSP format with H.2.64 compression) with AAC audio, uncompressed USB 3.0
video with PCM audio, HDMI 1.4b video, and 3Gb/s HD-SDI video outputs
Two balanced audio inputs - line level or mic level; two balanced audio outputs, line level
Control via web interface, Telnet, or RS-232 serial API
Pushbutton controls for on-screen display of IP and MAC address and for reboot
Status lights to show activity – USB, Network, Source, and OneLINK
Connector Panel
n
n
n
n
n
n
n
n
n
48 VDC 1.38 AMP – Connect only the power supply provided with the unit. Do not use the OneLINK power
supply with other products.
OneLINK Digital A/V Interface – Connect to the HDBaseT camera or conferencing system for power,
network, control, video, and audio
HDMI – Video from the connected camera or conferencing system
USB 3.0 – Uncompressed video output with PCM audio for conferencing applications
HD-SDI – Video output from the camera
Network – IP streaming and control
RS-232 – Control pass-through to the camera
Audio I/O Line Out 1 and Line Out 2 – Far-end audio from conferencing application
Audio I/O Mic/Line In 1 and Mic/Line In 2 – Microphone inputs
What's Included
n
n
n
n
n
n
OneLINK Bridge camera interface
48 VDC, 1.36 A power supply with AC cord set(s)
3-position, 3.5mm Phoenix connector plugs (4)
USB 3.0 cable, 6ft (1.8 m) Type A to Type B
RS-232 adapter (RJ-45F to DE-9F)
Quick-Start Guide
Document Number 411-0009-10 Rev 1 – May 2017
Tech Spec for the OneLINK Bridge HDBaseT Camera Interface
Connections
Specifications
Video outputs
Simultaneous HDMI, USB 3.0 and HDSDI
Audio inputs
Two mic/line-level channels with
Resolution and
frame rate
Audio outputs
Up to 1080p/60 (full HD)
Two balanced line-level audio outputs
noise/echo cancellation; phantom power
available
Mixing
10X8 audio mixer; audio is routable through all outputs
USB 3.0
Streaming
Uncompressed video with PCM audio
IP Streaming
RTSP format with H.264 video
compression and AAC audio
compression
Control Features
Web interface for configuration via browser
Telnet API for third-party external control
USB Human Interface Device (HID) for room audio controls
Operating
Environment
Storage
Environment
Dimensions
32°F to 104°F (0 °C to +40°C), 15% to 80% relative humidity, non-condensing
Weight
1.7 lb (0.8 kg)
-4°F to 140°F (-20° to +60° C), 15% to 80% relative humidity, non-condensing
Height 1.72 in. (4.4 cm); Width 8.375 in (21.3 cm); Depth 6.0 in. (15.2 cm)
Specifications are subject to change without notice.
Power
48 VDC, 1.36 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising