User Manual
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User Manual
AD440
Contents
1Important
3
2 Your Docking Speaker
4
3 Get started
6
4Play
7
5 Specifications
8
6 Troubleshooting
8
7Notice
9
Introduction4
What's in the box
4
Overview of the main unit
5
Connect power
Play from iPod/iPhone
Play from an external audio device
Charge the iPod/iPhone
Amplifier
General information
6
7
7
7
8
8
EN
2
1Important
•
•
•
•
•
•
•
•
•
3
Follow all instructions.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like.
Apparatus shall not be exposed to
dripping or splashing.
EN
•
•
Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•• Never remove the casing of this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
2 Your Docking
Speaker
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, and other external audio
devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC power adaptor
• Quick start guide
• Safety sheet
EN
4
Overview of the main unit
a
b
d
c
e
g
f
a
b
• Start or pause play.
• Mute sound.
c VOLUME + / • Adjust volume.
d Dock for the iPod/iPhone
e MP3-LINK
• Connect an external audio device.
f Battery compartment
g DC IN
• Connect AC power.
5
EN
3 Get started
Option 2: Battery power
Caution
Always follow the instructions in this chapter in
sequence.
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Remove batteries if they are exhausted or will not be
used for a long time.
Connect power
•• Batteries contain chemical substances, so they should
be disposed of properly.
This docking speaker can be powered by either
AC power or batteries.
1
2
Option 1: AC power
3
Open the battery compartment.
Insert 4 x 1.5V AA/UM3/LR6 batteries
with correct polarity (+/-) as indicated.
Close the battery compartment.
Caution
•• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
•• The type plate is located at the bottom of the device.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Note
•• You can hear incontinuous beep sound if the battery is
low. Then replace the batteries.
DC IN
EN
6
4Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod classic
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
Play from an external audio
device
Note
•• Make sure that no iPod/iPhone is docked in the speaker.
1
Listen to the iPod/iPhone
1
2
3
4
5
Place an iPod/iPhone in the dock.
Play audio on the iPod/iPhone.
To adjust volume, press VOL +/-.
To mute, press .
To play or pause, press
2
Connect an MP3 link cable (not supplied)
to:
• the MP3 LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
Press
to play music on the device (see
the device's user manual).
.
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
7
EN
5Specifications
Amplifier
Total Output Power
Signal to Noise Ratio
MP3 Link
Warning
4W per channel x 2
> 62 dBA
650mV RMS
General information
Power supply
-AC Power Adaptor
-Battery Power
Operation Power
Consumption
Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit
6Troubleshooting
Model: AS110-080AE130 (Philips);
Input: 100-240 V ~,
50/60Hz, 0.5A;
Output: 8.0 V 1.3 A
4X1.5V AA/UM3/LR6
15 W
<0.5 W
265 x 94 x 74 mm
0.9 kg
•• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/support). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•• Make sure that the AC power adaptor of
the device is connected properly.
•• Make sure that there is power at the AC
outlet.
•• Make sure that the batteries have been
installed correctly.
No sound
•• Adjust the volume.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
EN
8
7Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
9
EN
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AD440_12_UM_V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising