multi- functional wireless amplifier sh-360d

multi- functional wireless amplifier sh-360d
MULTIFUNCTIONAL
WIRELESS
AMPLIFIER
SH-360D
“High Performance, Delivered”
Front
Back
SH-360D
Specifications
Features
Speaker Specification
Digital power AC 90V ~264V current overload/
short circuit protection.
Speaker: 8” 100 W/4Ω
External Speaker: 4Ω~16Ω(120W)
Automatic Switch to Activate Build in Speaker or external
Speakers
CD/SD/USB is integrated into the same playback system; button
locators designed for easier control.
CD tracks can be directly recorded onto the SD card or the USB
device for storage or playback.
Power Requirements:
AC: 90 ~264V/50HZ-60HZ
DC: BATT / 12V-1.2A
Current Consumption: 100W
WM-208 / WM- 209 Wireless transmitter:
3.7V- 2100mA Rechargeable lithium battery (Sanyo Japan)
Charger: AC90V~264V/ OUT- DC 4.2V
MP3 WMA System CD/SD/USB
Sample rate: 44.1KHz
Bite rate: 320Kbps
Matching Transmitter
WM208 Handheld Microphone / WM209 Bodypack
Wireless System
Supporting 48 KHz, 16-bit 2 Channels,
Uncompressed audio transmission
UHF FSK Wireless Link
Digital Volume Control
Low current consumption
Dimension & Weight
240(D) x 265(W) x 414(H) mm
9.4”(D) x 10.4”(W) x 16.2”(H) inches
9.5 Kg / 20.9 lbs
The CD playback incorporates two shock-resistant designs: the
digital electronic shock-resistance design and the mechanical
rotary crane system.
The wireless transmitter (WM-209) can be connected to IPOD/
IPAD/IPHONE or any MP3 audio sources and played back at the
host through wireless transfer.
Professional standard timbre, vigorous low-frequency, clear
mid-range, and detailed high-frequency; incomparable by other
products of similar class…
Professional stage performance speaker system, powerful sound
pressure and wide listening angle.
AUX input, MIC input, or any audio sources can be recorded to the
SD card or USB device for storage or playback.
TALK - While music is playing, the voice priority button can be
switched on; the music will automatically mute for approximately
2 seconds and will resume if there is no voice input.
UHF frequency /fully digitalized CMOS processing.
UHF wireless transmitter (WM-209) and the lavalier capacitive
microphone (FWM-49H) combine into the optimal timbre.
The volume of the UHF handheld wireless microphone (WM-208) /
body-pack/ (WM-209) can be adjusted manually while in use.
WM-208/ WM-209 have 9999 groups built-in which will not be
interfered by external signals; groups could be manually set.
Every group in the host receiver is equipped with Diversity A/B RF
dual receiver antenna systems.
Ideal Applications
• Trade Show
• In & out door activities
• Convention Centre
• Religious Service
• Shopping Centres
• Street Artist Performance
The wireless microphone will automatically scan the surrounding
environment after powered on, so it will not be interfered by
external noises.
Built-in DC-18V/3.2A rechargeable battery with over-charge
current protection; it can also be connected to an external
DC/18V~36V.
This brochure is printed with recycled paper & Soy Ink
Amplifier Requirements
INPUT IMPEDANCE & SENSITIVITY
Reference 1KHz -1OdB Line Output Load=100K OHM
CD: 47KΩ/ -10dBV (316mV)
AUX: 20KΩ/ -14dBV (200mV)
MIC/1~3: 5KΩ/ -50dBV (3.2mV Unbalance)
Wireless/1~2: 10KΩ/ -14dBV (200mV)
FREQUENCY RESPONSE
LOAD=100KΩ Reference at line output
CD: 17 - 16K Hz +2/-3dB (TCD781 TRK1,4,16)
AUX: 20 - 20K Hz +2/-3dB (INPUT=-14dBV)
MIC/1~3: 20 - 15K Hz +2/-3dB (INPUT=-50dBV)
Wireless/1~2: 20 - 20K Hz +2/-3dB (INPUT=-14dBV)
THD+N
W/20kHz LPF A-WEIGHTED
LOAD=100KΩ, Reference at line output
CD: Less than 0.05% (TCD782 TRK2)
AUX: Less than 0.05% (INPUT=1KHz -14dBV)
MIC/1~3: Less than 0.08% (INPUT=1KHz -50dBV)
Wireless1~2vLess than 0.05% (INPUT=1KHz -14dBV)
MAXIMUM INPUT
1KHz, THD=1% LOAD=100K OHM, Reference at line output
CD: More than +6dBV
AUX: More than +2dBV
MIC/1~3: More than -30dBV
Wireless1~2: More than +5dBV
MAXIMUM POWER OUTPUT
AUX 1KHz -10dB
Speaker Out: more than 100W LOAD 6ΩTHD=10%
MINIMUM HUM
W/20KHz LPF
Speaker Out: Less than 2mV
S/N RATIO
W/20KHz LPF, Reference at line output
CD: more than 80dB (TCD782 TRK2)
AUX: more than 70dB (INPUT=1 KHz -14dBV)
MIC/1~3: more than 65dB (INPUT=1 KHz -50dBV)
Wireless1~2: more than 70dB (INPUT=1 KHz -14dBV)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising