Velocitykvm T-4200 Module 24 Datasheet
MODULAR KVM EXTENSION - Velocitykvm T- Series 4200
Velocitykvm T-Series
Module 24
Two DVI Displays
Module 24
Extension Options Include:
USB 2.0 and USB 1.0 HID
USB 1.0 HID (ONLY)
Fiber Options Include:
Single-Mode
Multi-Mode
Powered by
MRTS Technology
Velocitykvm T-Series Module 24 (transmitter shown)
Extend Two Single-Link DVI Sources, USB 1.0 and 2.0 up to 40 Kilometers
The Velocity T-Series Module 24 is an interface option, designed for use in the Velocitykvm
T-Series 4200 modular chassis (T-4200 sold separately). This module supports two single-link
DVI displays, PS2, full duplex stereo audio, stereo emitter, and serial (RS-232). Depending on your
requirements, module model options feature either USB 1.0 HID and USB 2.0 or USB 1.0 HID
(only). Using multi-mode or single mode fiber, it allows users to locate a DVI monitor and
peripherals via fiber from just a few meters up to 40 kilometers (24 miles) away from the
controlling computer securely and without the loss of resolution.
Powered by Thinklogical’s cutting edge, patent-pending MRTS (Multi Rate Transmission System)
technology, the module transports every frame of a DVI video stream seamlessly, with no
compression, or dropped frames. In addition, all high speed peripherals function with no
latency making it ideally suited for a wide range of applications in the broadcast and
post-production field, as well as command and control centers, universities, air traffic control,
energy production and exploration, and any other commercial KVM applications.
tm
www.thinklogical.com
MODULAR KVM EXTENSION
- Velocitykvm
Series 4200
KVM EXTENSION
- VelocityT-Series
Module Features
Module 24 leverages standard SFP+ transceivers and requires three fibers for multi-mode and single-mode configuration.
Two fibers are dedicated to the video and USB while the third fiber is the back channel for the USB and DDC. The DDC
(Display Data Channel) or EDID (Extended Display Identification Data) information is provided to the CPU by either a
generic table stored inside the transmitter, or the displays table via an active link between the receiver and transmitter.
Designed for use in the Velocitykvm T-4200 chassis
(sold separately)
Multi-mode and single-mode models are available
with LC type fiber connectors
Supports all single-link DVI video resolutions
Flawless image quality with no frame dropping
Extends two DVI displays
Supports USB 1.0 HID and USB 2.0 (model available
with USB 1.0 HID only)
MRTS technology 6.25Gbps allows for full frame rate
transmission of uncompressed DVI
Requires three fiber optic cables
Flawless image quality with no frame dropping
Single-mode or multi-mode fiber options extend
signals up to:
- 750 meters using SX+ multi-mode fiber
- 1000 meters using eSX+ multi-mode fiber
- 40 kilometers (24 miles) using single-mode fiber
Full keyboard and mouse emulation through the
transmitter, full duplex stereo audio, serial RS-232
DDC2B/EDID compliant
Stereo emitter for active 3D applications
Simple plug and play
Fully compatible with Thinklogical's KVM VX Router
line of products
A dry contact annunciator provides an alarm warning
in the event of a power failure or a unit overheating
Velocitykvm T-Series Module 24 -transmitter, multi-mode, USB 2.0 and USB 1.0 HID model
Velocitykvm T-Series Module 24 - receiver, multi-mode, USB 2.0 and USB 1.0 HID model
www.thinklogical.com
MODULAR KVM EXTENSION
- Velocitykvm
Series 4200
VIDEO
EXTENSIONT-- Series
The Modular KVM Extension System – Ideal Rack Space Saving Solution
The Velocitykvm T-4200 chassis has a versatile modular design which is equipped with dual, hot-swappable interface
modules. This flexible design of the chassis makes it an ideal solution for a variety of applications, serving as a transmitter,
receiver, or even a transceiver.
T-4200 chassis module options include:
Module 4 – One single-link DVI display, PS2, full duplex stereo audio, stereo emitter, serial (RS-232), USB 1.0 HID and USB
2.0 or USB 1.0 HID (only)
Module 5 - One single-link DVI or RGB display, PS2, full duplex stereo audio, stereo emitter, serial (RS-232), USB 1.0 HID and
USB 2.0 or USB 1.0 HID (only)
Module 8 - One dual-link DVI, PS2, full duplex stereo audio, stereo emitter, serial (RS-232), USB 1.0 HID and USB 2.0 or
USB 1.0 HID (only)
Module 24 - Two single-link DVI displays, PS2, full duplex stereo audio, stereo emitter, and serial (RS-232) , USB 1.0 HID and
USB 2.0 or USB 1.0 HID (only)
Velocitykvm T-4200 Chassis Equipped with Two Module 24 Interfaces - System Application Example
Application Description: Two functional source computers connected to one Velocitykvm T-4200 transmitter chassis
equipped with dual module 24 interface components, which extends video and peripheral signals to two separate
Velocitykvm-24 (stand alone) receiver destinations at separate workstation locations. Signals are routed through two
Thinklogical VX160 routers.
www.thinklogical.com
MODULAR KVM EXTENSION - Velocitykvm T- Series 4200
VIDEO EXTENSION - Series
Specifications
Video Resolution
Operating Temp.
Humidity
Dimensions
Compliance
DVI-D all single-link DVI resolutions
0°-50°C; (32°-122°F)
5-95% RH, non-condensing
Height: 1.592” (4 cm)
Depth: 7” (17.8 cm)
Width: 7.406" (18.8 cm)
(Tolerance: ± .039"; .100cm)
Weight: 1.5 lbs (0.68 kg) per unit
Shipping Weight: 9 lbs (4.08 kg)
17 watts per plug-in module
Single-mode and multi-mode over three fibers (for fewer fiber counts contact Thinklogical)
Fiber is available, not supplied
Up to 50 meters using 62.5/125um, type OM1; Up to 350 meters using 50/125um, type OM2
Up to 750 meters using 50/125um, type OM3; Up to 1000 meters using 50/125um, type OM4;
Up to 40 kilometers using 9/125um, type OS2 (single-mode)
Approvals for US, Canada, and European Union
Warranty
12 months from date of shipment - extended warranties available
Weights
Power Consumption
Optical Cable
Optical Distance
Connectors
Transmitter
Video
Audio MIC
Audio LINE
Serial Port
USB 1.0 (HID)
USB 2.0
PS2 Keyboard
PS2 Mouse
Software Updates
Fiber Connectors
DVI-D (4)
3.5mm Jack
3.5mm Jack
DB9 Female
USB B
USB B
MiniDIN 6 Female
MiniDIN 6 Female
USB B (2)
LC for Single-Mode and Multi-Mode
Cables Included: DVI-D single-link male to male, 6.5 feet
Audio Kit:
6 pin MiniDIN male to male, 6 feet (2)
USB A-B cable, 6 feet (2)
3.5mm male to 3.5mm male to 3.5mm male plug, 6 feet (2)
DB9 male to DB9 Female cable, 6 feet (1)
BNC male to BNC male cable, 50Ω, 6 feet (1)
Receiver
Video
Audio MIC
Audio LINE
Serial Port
USB 1.0 (HID)
USB 2.0
PS2 Keyboard
PS2 Mouse
Software Updates
Fiber Connectors
Cables Included:
DVI-D (4)
3.5mm Jack
3.5mm Jack
DB9 Male
USB A (4)
USB A (4)
MiniDIN 6 Female
MiniDIN 6 Female
USB B (2)
LC for Single-Mode and Multi-Mode
USB A to USB B cable, 6 feet
www.thinklogical.com
MODULAR
KVM
EXTENSION
- Velocity
Series T- Series
MODULAR
KVM
EXTENSION
- Velocitykvm
MODULAR
KVM EXTENSION
- Velocitykvm
T- Series 4200
Velocitykvm T-Series Module 24 Ordering Information
VELOCITY 24 MODULE
Part Number and Description
VTM-U00024-LCRX
VTM-U00024-LCTX
VTM-H00024-LCRX
VTM-H00024-LCTX
Velocity KVM T-Series Extender Receiver, Dual Head Single Link DVI, RGB, USB 2.0, KMAS, LC
Velocity KVM T-Series Extender Transmitter, Dual Head Single Link DVI, RGB, USB 2.0, KMAS, LC
Velocity KVM T-Series Extender Receiver, Dual Head Single Link DVI, RGB, USB 1.0 (HID ONLY), KMAS, LC
Velocity KVM T-Series Extender Transmitter, Dual Head Single Link DVI, RGB, USB 1.0 (HID ONLY), KMAS, LC
SINGLE-MODE OPTICS OPTION
VOP-S06 Velocity 24 T-Series Optics Option for Transmitter or Receiver, Single-Mode, Three Fibers, 40KM, LC
MULTI-MODE OPTICS OPTION
VOP-M30 Velocity 24 T-Series Optics Option for Transmitter or Receiver, Multi-Mode, Three Fibers, 1000M, LC
tm
100 Washington Street
Milford, CT 06460 USA
Contact a Thinklogical Sales Representative at
sales@thinklogical.com or (203) 647-8700
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising