Cisco Catalyst 3020 Blade Switch for HP c-Class

Cisco Catalyst 3020 Blade Switch for HP c-Class
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Overview
The Cisco Catalyst 3020 Blade Switch for HP c-Class BladeSystem provides HP customers with an integrated switching
solution from Cisco Systems. This solution provides Cisco resiliency, advanced security and enhanced manageability to the
server edge while dramatically reducing cabling requirements. The Catalyst 3020 Blade Switch capitalizes on your current
Cisco network infrastructure to reduce the total cost of implementation and ownership. By utilizing the advanced Cisco endto-end management framework, customers can simplify current and future deployments reducing implementation and
management costs.
Flexible to fit your needs - The Catalyst 3020 Blade Switch is designed with sixteen internal 1Gb downlinks and eight 1Gb
RJ-45 copper uplinks. Up to four uplinks can be optionally configured as fiber SX links. Two uplinks can optionally be
configured as internal cross-connects.
Figure 1 Catalyst 3020 Front View
1.
2.
3.
4.
5.
Switch Module
Release latch
UID LED
SFP Module Port LED
SFP Module Ports for SX Fiber
6.
7.
8.
9.
10
Gigabit Ethernet Port LEDs
Gigabit Ethernet RJ-45 Ports
Health LED
Mode Button
Switch LED Panel
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 1
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Models and Options
Models
Cisco Catalyst 3020 Blade Switch for HP
Options
1000Base SX Fiber SFP Module
410916-B21
378929-B21
At A Glance
Performance
Wire speed switching on sixteen internal 1Gb ports.
Wire Speed switching on eight external 10/100/1000BASE-T ports. (Two of these ports can be used as crossconnects to provide failover protection).
Four external 10/100/1000 SFP based ports that can be configured in lieu of the 10/100/1000BASE-T ports to support
Fiber SX SFP modules from Cisco Systems.
One external console port.
Management
CiscoWorks Software that includes multilayer feature configurations such as routing protocols, ACLs, and QoS
parameters.
IOS CLI support providing a common user interface and command set with all Cisco routers and Cisco Catalyst
desktop switches.
The Catalyst Blade Switch 3020 supports an embedded Remote Monitoring (RMON) software agent for enhanced
traffic management, monitoring and analysis.
Security
VLAN - Virtual Local Area Network is a logical network topology configured on top of a physical network topology
which conserves bandwidth and improves security by limiting traffic to specific groups of devices.
Supports Cisco's Identity-Based Networking Services (IBNS) which prevents unauthorized network access and insures
that users get only their designated privileges.
Compatible with Cisco Secure Access Control Server (ACS) so that user security profiles and authentication follow the
user regardless of where they connect on the network.
Access Control Lists (ACL's) are maintained in hardware for maximum performance and can be used to guard against
denial-of-service and other attacks.
802.1x Port Security recognizes the MAC address of the device connecting to it and will set rights or limitations based
on predefined security thresholds.
Compatibility
HP ProLiant Servers
ProLiant BL c-Class
Server Blade
Enclosures
ProLiant BL c-Class
Media Options
HP ProLiant BL460c Server Blade
HP ProLiant BL480c Server Blade
HP BladeSystem c7000 Enclosure
Cisco Fiber SX SFP Module
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 2
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Models and Options
Required Network
Cabling
10Base-T
100Base-TX
1000Base-T
1000Base-SX
HP Service and
Support Offerings
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of resellers and service providers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under the warranty or
available for an additional fee. Enhancements to warranty services are available through HP Care
Pack services or customized service agreements.
NOTE: The Cisco Catalyst Blade Switch 3020 Limited Warranty includes 1 year Parts, 1 year
Labor, 1-year on-site support and 3-years software updates.
Care Pack services provide a range of life cycle support options that let you choose the service
levels that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24
hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials
and VMware-based IT solutions helping to deliver high level of application availability.
Response times range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services for c-Class server blades, cover the server blade and the c-Class blade
enclosure that the server blade is installed in as well as interconnects, power enclosure with
power supplies and power distribution.
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please
visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 3
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Related Options
Service and Support
Offerings (HP Care
Pack Services)
NOTE: The HP Care Pack services for ProLiant BL c-Class server blades, cover the server blade
and all HP branded hardware options qualified for the server, purchased at the same time or
afterwards, internal to the servers.
Hardware Support Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UE458E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UE459E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
UE460E
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support
UE473E
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP Supported Ethernet devices
covered include the Ethernet Pass-Through Module, Fibre Channel PassThrough Module, Cisco Catalyst 3020 Blade Switch and GbE2c Ethernet Blade
Switch.
Hardware Support Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Upfront Fixed Installation & Start-up Services
HP BladeSystem c-Class Infrastructure Installation & Startup service, Electronic
HP BladeSystem Enhanced Network Installation & Start-up service, Electronic
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/bladesystemservices
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
UE477E
UE478E
UE479E
UE480E
UE602E
UE603E
Page 4
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Shipping Dimensions
Length
Width
Height
Shipping Weight
Product Specifications Performance
Hardware
Connectors and
Cabling
352.55mm (13.88 in)
270.00mm (10.63 in)
120.65mm (4.75 in)
2.0Kg (4.4lbs)
48 Gbps switching fabric
Forwarding rate based on 64-byte packets: up to 36 Mpps
128 MB DDR SDRAM and 32 MB Flash memory
Configurable up to 8192 MAC addresses
Configurable up to 1000 IGMP groups and bridging entries
Configurable maximum transmission unit (MTU) of up to 9018 bytes
(jumbo frames)
Gigabit Ethernet uplink ports (Up to 8 external)
8 external 10/100/1000BASE-T RJ-45 ports. Two of these ports
can be configured to provide an internal crossover connection to
an associated additional Cisco Catalyst Blade Switch 3020
4 external 10/100/1000 SFP or 10/100/1000BASE-T combo ports.
The SFP cage supports Gigabit Ethernet Fiber SX SFP modules
from Cisco Systems.
Management console port:
Indicators
RJ-45-to-DB9 cable for PC connections
Total of 18 LEDs on the face place
12 LEDs for uplink port status
4 Switch status LEDs
2 HP specific LEDs to indicate Health and UID status
Dimensions
Length
10.5in (267.7mm)
Width
7.5 in (92.79mm)
Height
1.1 in (27.94mm)
Weight
1.27Kg (2.8 Lbs)
Environmental Ranges Temperature Range
Operating Temperature 0 to 40 C
Storage Temperature
-25 to 70 C
Operating Relative
10 to 85%
Humidity
(non-condensing)
Storage Relative
5 to 95%
Humidity
(non-condensing)
Power Specification
12V @ 5A (60 W)
Product Specifications Security Features
Software
IEEE 802.1x allows dynamic, port-based security, providing server
authentication.
IEEE 802.1x with VLAN assignment allows a dynamic VLAN
assignment for a specific server, regardless of where the server is
connected.
IEEE 802.1x and port security are provided to authenticate the port and
manage network access for all MAC addresses, including those of the
server.
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 5
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Spanning Tree
Features
Trunking Features
VLAN Features
Quality of Service
Features
IEEE 802.1x with an ACL assignment allows for specific identity-based
security policies, regardless of where the server is connected.
IEEE 802.1x with Guest VLAN allows servers without 802.1x clients to
have limited network access on the Guest VLAN.
Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized
data flows from being bridged within VLANs.
Port-based ACLs (PACLs) allow security policies to be applied on
individual switch ports.
SSH Protocol (v2), Kerberos, and SNMPv3 provide network security by
encrypting administrator traffic during Telnet and SNMP sessions. SSH,
Kerberos, and the cryptographic version of SNMPv3 require a special
cryptographic software image due to U.S. export restrictions.
Secure Sockets Layer (SSL) provides a secure means to use Webbased tools such as HTML-based device managers.
Private VLAN Edge provides security and isolation between switch
ports, helping to ensure that users cannot snoop on other users' traffic.
Bidirectional data support on the Switched Port Analyzer (SPAN) port
allows Cisco Secure Intrusion
IEEE 802.1D Spanning-Tree Protocol support for redundant backbone
connections and loop-free networks simplifies network configuration and
improves fault tolerance.
Per-VLAN Rapid Spanning-Tree (PVRST+) allows rapid spanning-tree
convergence on a per-VLAN spanning-tree basis, without requiring the
implementation of spanning-tree instances.
IEEE 802.1s Multiple Spanning-Tree Protocol (MSTP) allows a
spanning-tree instance per VLAN and enables each VLAN to use a
different uplink allowing better utilization of uplinks.
IEEE 802.1w Rapid Spanning-Tree Protocol (RSTP) provides rapid
spanning-tree convergence independent of spanning-tree timers.
Unidirectional Link Detection (UDLD) and Aggressive UDLD allow
unidirectional links to be detected and disabled to avoid problems such
as spanning-tree loops.
Cisco UplinkFast and BackboneFast technologies help to ensure quick
failover recovery, enhancing overall network stability and reliability.
PVST+ allows for Layer 2 load sharing on redundant links to efficiently
use the extra capacity inherent in a redundant design.
Dynamic Trunking Protocol (DTP) enables dynamic trunk configuration
across all switch ports.
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast
EtherChannel® groups or Gigabit EtherChannel® groups to link to the
upstream switch/router, or server blades
Link Aggregation Control Protocol (LACP) allows the creation of
Ethernet channeling with upstream switches that conform to IEEE
802.3ad. This feature is similar to Cisco EtherChannel technology and
PAgP.
4096 VLAN IDs are supported.
VLAN1 minimization allows VLAN1 to be disabled on any individual
VLAN trunk link.
VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on
VTP trunks by flooding broadcast traffic only on trunk links required to
reach the destination devices.
Wire rate performance for highly granular QoS functions. E.g. Granular
rate limiting
Asynchronous data flows upstream and downstream from the end
station or on an uplink are easily managed using ingress policing and
egress shaping.
802.1p CoS and DSCP field classification are provided, using marking
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 6
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
and reclassification on a per-packet basis by source and destination IP
address, source and destination MAC address, or Layer 4 TCP/UDP
port number.
Rate limiting is provided based on source and destination IP address,
source and destination MAC address, Layer 4 TCP/UDP information, or
any combination of these fields, using QoS ACLs (IP ACLs or MAC
ACLs), class maps, and policy maps.
Up to 64 aggregate or individual policers per port are allowed.
Cisco control-plane and data-plane QoS ACLs on all ports help to
ensure proper marking on a per-packet basis.
4 egress queues per port enable differentiated management of up to 4
traffic flows
Shaped Round Robin scheduling helps to ensure differential
prioritization of packet flows by intelligently servicing the egress queues.
Weighted Tail Drop (WTD) provides congestion avoidance at the
ingress and egress queues before a disruption occurs.
Strict priority queuing guarantees that the highest-priority packets are
serviced ahead of all other traffic.
The Cisco Committed Information Rate (CIR) function guarantees
bandwidth in increments as low as 8 Kbps.
Management Features Cisco IOS CLI support provides a common user interface and command
set with all Cisco routers and Cisco Catalyst desktop switches.
Cisco Service Assurance Agent (SAA) support facilitates service-level
management throughout the LAN.
VLAN trunks can be created from any port, using either standardsbased 802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN
architecture.
Up to 1005 VLANs per switch and up to 128 spanning-tree instances
per switch are supported.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration
across all switches.
IGMP snooping provides fast client joins and leaves of multicast
streams and limits bandwidth-intensive video traffic to only the
requestors.
Remote Switch Port Analyzer (RSPAN) allows administrators to
remotely monitor ports in a Layer 2 switch network from any other
switch in the same network.
For enhanced traffic management, monitoring, and analysis, the
Embedded Remote Monitoring (RMON) software agent supports 4
RMON groups (history, statistics, alarms, and events).
Layer 2 traceroute eases troubleshooting by identifying the physical
path that a packet takes from source to destination.
All 4 RMON groups are supported through a SPAN port, which permits
traffic monitoring of a single port, a group of ports from a single network
analyzer, or RMON probe.
The Domain Name System (DNS) provides IP address resolution with
user-defined device names.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering
software upgrades by downloading from a centralized location.
Network Time Protocol (NTP) provides an accurate and consistent
timestamp to all intranet switches.
Multifunction LEDs per port for port status; and switch-level status LEDs
for system.
CiscoWorks Features CiscoWorks network-management software provides management
capabilities on a per-port and per-switch basis, providing a common
management interface for Cisco routers, switches, and hubs.
SNMP v1, v2c, and v3 and Telnet interface support deliver
comprehensive in-band management, and a CLI-based management
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 7
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
console provides detailed out-of-band management.
Cisco Discovery Protocol versions 1 and 2 enable a CiscoWorks
network-management station for automatic switch discovery.
Management and
Standards Support
Management
BRIDGE-MIB (RFC1493)
Information Base (MIB) CISCO-CDP-MIB
Support
CISCO-CLUSTER-MIB
CISCO-CONFIG-MAN-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENVMON-MIB
CISCO-FLASH-MIB
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO IP-STAT-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB
CISCO-PING-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB
CISCO-TCP-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB
ENTITY-MIB
ETHERLIKE-MIB
IF-MIB (in and out counters for VLANs are not supported)
IGMP-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB (per the agent capabilities specified in the CISCORFC1213-CAPABILITY.my)
RFC1253-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
Standards
IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
IEEE 802.1D Spanning-Tree Protocol
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 8
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
1000BASE-SX
RMON I and II standards
Safety and
Compliance
Safety Certifications
UL/CUL Recognition to UL/CSA 60950-1
TUV to EN 60950-1
CB report and certificate to IEC 60950-1 with all country deviations
CE Marking
Electromagnetic
FCC Part 15 Class A
Emissions
EN 55022 Class A (CISPR22 Class A)
Certifications FCC Part
VCCI Class A
15 Class A
AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
MIC Class A
CE Marking
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Cisco, CiscoWorks, and Cisco Catalyst are US registered trademarks of Cisco Systems Corporation.
Windows is a US registered trademark of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 12515 Worldwide QuickSpecs — Version 1 — 6.14.2006
Page 9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising