PCI Express Driver for Macintosh

PCI Express Driver for Macintosh
AJ-PCD35P_E_EJ(VQT1X46-5)_E.book
17 ページ
2012年9月24日 月曜日 午後4時39分
PCI Express Driver for Macintosh
This driver is for the P2 card on this unit.
The latest driver information can be viewed at the
following website.
http://pro-av.panasonic.net/
5
6
Installation of the PCI Express driver
For Mac OS X 10.4
1
2
3
4
5
6
7
Insert the installation CD.
Double-click the Macintosh folder on the
CD.
Double-click the Tiger folder.
Double-click the AJ-PCD35 folder.
Double-click “PCD35Driver.dmg” in the
AJ-PCD35 folder.
Double-click “PCD35Driver.pkg”.
When driver installation starts, follow the
instructions on the installation screen.
For Mac OS X 10.5/10.6/10.7/10.8
1
2
3
Insert the installation CD.
Double-click the Macintosh folder on the
CD.
For Mac OS X 10.5
Double-click the Leopard folder.
For Mac OS X 10.6
Double-click the SnowLeopard folder.
For Mac OS X 10.7
Double-click the Lion folder.
7
Double-click “P2DriveFamilyDriver
Install.dmg” in the P2 Drive folder.
Double-click “P2DriveFamilyDriver
Install.pkg”.
When the warning window advising that
[“P2DriveFamilyDriver Install.pkg” can’t be
opened because it is from an unidentified
developer.] has appeared, click the [OK]
button.
Again, click [P2DriveFamilyDriver
Install.pkg] while holding down the “Ctrl”
key, and select [Open] on the menu which
is displayed.
The confirmation window advising that
[“P2DriveFamilyDriver Install.pkg” is from
an unidentified developer. Are you sure
you want to open it?] now appears so click
the [Open] button.
When driver installation starts, follow the
instructions on the installation screen.
<Notes>
z By installing this driver, it is possible to connect
to this unit to the Macintosh using PCI Express
to transfer data at a higher rate.
z When the P2 card is removed, drag the icon
for the P2 card to Trash and confirm that the
P2 card icon disappears before executing
removal.
z Reinsert the P2 card if the P2 card icon is not
displayed.
<Reference>
Occasionally, a message regarding “Device
Removal” may be displayed when the P2 drive is
connected and the Macintosh is turned on.
The same message may also be displayed when
reinserting the P2 card because the P2 card icon
is not displayed, but this is not a malfunction.
Click “OK” and proceed to use the card.
For Mac OS X 10.8
Double-click the Mountain Lion folder.
4
Double-click the P2 Drive folder.
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising