EZ100PK PC/SC Smart Card Reader Installation Guide V3.0 For

EZ100PK PC/SC Smart Card Reader Installation Guide V3.0 For
EZ100PK PC/SC
Smart Card Reader
Installation Guide
V3.0
For Win2000
Version: 3.0
Date: July 31, 2001
Castles Technology Co., LTD.
Tel: 886 (2) 8665-0530
Fax: 886 (2) 8665-0531
E-Mail: casauto@casauto.com.tw
Web: www.casauto.com.tw
© Castles Techno logy Co., LTD.
All rights reserved
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Table Of Contents
WARNING ....................................................................................................................3
ABOUT THIS MANUAL .............................................................................................3
BEFORE INSTALLATION (IMPORTANT!): ...........................................................4
EZ100PK PC/SC D RIVER INSTALLATION STEP-BY-STEP .......................................5
Part 1: ...............................................................................................................5
Part2: ............................................................................................................. 12
Castles Technology Co., Ltd. A ll rights reserved.
2 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
WARNING
Information in this document is subject to change without prior notice.
No part of this publication may be reproduced, transmitted, stored in a
retrieval system, nor translated into any human or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual, or otherwise, without the prior written permission of Castles
Technology Co., LTD.
All trademarks mentioned are proprietary of their respective owners.
ABOUT THIS MANUAL
This manual describes the installation of PC/SC driver for EZ100PK IC card
reader for Microsoft Windows 2000.
Castles Technology Co., Ltd. A ll rights reserved.
3 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Before installation (Important!):
* Before installing the EZ100PK PC/SC driver, please stop the Smart
Card Service. *
Castles Technology Co., Ltd. A ll rights reserved.
4 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
EZ100PK PC/SC Driver Installation Step-by-Step
Part 1:
Step1:
Plug the reader to PS/2 port.
Step2:
Start the “Hardware Wizard”(right-click My Computer, select
Properties, select Hardware tab, and click <Hardware Wizard>)
Castles Technology Co., Ltd. A ll rights reserved.
5 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Castles Technology Co., Ltd. A ll rights reserved.
6 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step3:
When the welcome message shows, click <Next> button to continue.
Step4:
Select "Add/Troubleshoot a device", then click <Next> button.
Castles Technology Co., Ltd. A ll rights reserved.
7 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step5:
Select “Add a new device”, then click <Next> button.
Step6:
Select "No, I want to select the hardware from a list", then click
<Next> button
Castles Technology Co., Ltd. A ll rights reserved.
8 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step7:
In "Hardware Type" page, select "Other devices", then click <Next>
button.
Step8:
Click <Have Disk> button to specify where the driver is.
Castles Technology Co., Ltd. A ll rights reserved.
9 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step9:
Specify the path to “(CD-Rom Drive):\Drivers\EZ100PK\Win2k”
then click <OK> button.
Step10:
Select "EZ100PK PC/SC Smart Card Reader", then click <Next>
button.
Castles Technology Co., Ltd. A ll rights reserved.
10 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step11:
Click <Next> button to continue and follow the instruction shown in
wizard.
Finish:
Click <Finish> button to finish the part 1 installation.
Castles Technology Co., Ltd. A ll rights reserved.
11 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Part2:
Step1:
Start the “Device Manger”(right-click My Computer, select Properties,
select Hardware tab, and click <Device Manger>)
Castles Technology Co., Ltd. A ll rights reserved.
12 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step2:
Select “Keyboard” category, right click the keyboard installed, and
select “Properties”.
Step3:
Select the “Driver” tab, and click <Update Driver> button.
Castles Technology Co., Ltd. A ll rights reserved.
13 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step4:
When the welcome message shows, click <Next> button to continue.
Step5:
Select "Display a list of the known drivers for this device so that
I can choose a specific driver", then click <Next> button.
Castles Technology Co., Ltd. A ll rights reserved.
14 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step6:
Select “Show compatible hardware“, and click <Have Disk> button
to specify where the driver is.
Step7:
Specify the path to ”(CD-Rom Drive):\Drivers\EZ100PK\Win2k”,
then click <OK> button.
Castles Technology Co., Ltd. A ll rights reserved.
15 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step8:
Select "Keyboard that needs filtering for EZ100PK", then click
<Next> button.
Step9:
If “Update Driver Warning” dialog appear, click <Yes> to continue.
Castles Technology Co., Ltd. A ll rights reserved.
16 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step10:
Click <Next> button to continue.
Step11:
If “Digital Signature Not Found” dialog appear, click <Yes> button.
Castles Technology Co., Ltd. A ll rights reserved.
17 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step12:
Click <Finish> to complete the upgrade driver.
Step13:
Click <Close> button.
Castles Technology Co., Ltd. A ll rights reserved.
18 / 19
EZ100PK PC/SC Smart Card Reader Installation Guide v3.0 for Win2000
Step14:
Click <Yes> button to restart your computer.
Step15:
After system restart, you need to start the Smart Card Resource
Manager.
To start the resource manager:
1. Login with Administrator.
2. Enter My Computer / Control Panel /Administrator Tools
/Component Services
3. Find “Smart Card” service and Start it.
Step16:
Finish.
Castles Technology Co., Ltd. A ll rights reserved.
19 / 19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising