MTX5-D
MTX Series
Matrix Processor
MTX5-D
Rear Panel
Matrix processor offers expandability and format compatibility
with an on-board Dante network port and MY card slot.
• Inputs; 8 mono (mic/line), 2 stereo (line), 16digital (via YDIF*) .
• Outputs; 8 mono (line), 16 digital (via YDIF*) .
• Can expand YDIF* equipped inputs and outputs with Exi8/Exo8 expanders.
• 16 Channel I/O on-board Dante network port for larger installations.
• MY card slot offers further expandability and compatibility with other audio formats.
• SD Card Slot for playback of MP3/WAV files stored on an SD Memory Card.
• Functions for worry-free operation; Feedback Suppressor, Auto Gain Control, Priority Ducker.
• Two useful digital processors “Reverb” and “Echo” for entertainment applications.
• Remotely control the volume and presets of multiple zones with DCP series wall mount digital controllers.
• Wireless DCP for iPhone and iPod touch is free available on the App Store.
• Equipped with Network port and GPI ports that offer compatibility with touch panel controllers such as AMX/Crestron.
• Easy setup and parameter control with MTX Editor.
*YDIF: the newly developed digital transmission format; a unique propriety Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ether cable.
OPTIONS
INPUT EXPANDER/OUTPUT EXPANDER
EXi8 Input Expander
1U
EXi8 input expanders convert analog microphone/line audio to digital and
transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be
controlled remotely from an MTX processor via Ethernet cable.
EXo8 Output Expander
EXo8 output expanders feature 8 channels of DA converters that produce
high quality analog audio by converting digital output from MTX Series
processors via YDIF.
DIGITAL CONTROL PANELS
DCP Series Digital Control Panel provide flexible external control of several functions such as preset recall, levels, and SD card playback.
All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.
DCP1V4S
1 Volume & 4 Switch equipped
Wall Mount Control panel for
MTX Series
Easy connection by CAT5 carrying
RS485 + power
Maximum 8 DCPs can be
connected to 1 MTX Series
DCP4S
4 Switch equipped Wall Mounut
Control panel for MTX Series
Easy connection by CAT5 carrying
RS485 + power
Maximum 8 DCPs can be
connected to 1 MTX Series
DCP4V4S
4 Volume & 4 Switch equipped
Wall Mounut Control panel for
MTX Series
Easy connection by CAT5 carrying
RS485 + power
Maximum 8 DCPs can be
connected to 1 MTX Series
1U
MTX Series
GENERAL SPECIFICATIONS
Memory bank
Mixing Capacity
Internal Processing
Sampling frequency rate
48kHz / 44.1kHz
Signal delay
Total harmonic distortion*1
Frequency response
Less than 3.0ms (AD-DA @48kHz)
Less than 0.05% (+4dBu, Gain:-6dB),
Less than 0.1% (+4dBu, Gain:+66dB)
20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range
Hum & noise level
107dB (Gain:-6dB)
-60dBu (Gain:+66dB), -83dBu (Gain:-6dB)
Output Channel Functions
Input terminal
PRESET: 50
Mixing Channel : 16 Mono + 3 Stereo + 2 Effect Return + 8 Insert
Output Busses : 16 Mono
Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback
suppressor (only available in ch 1-8)
Stereo CH:3-band PEQ, Comp, Auto Gain Control
Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way),
Delay, 6-band PEQ, Limiter
Priority Ducking, Ambient Noise Compensator
Input Channel Functions
ANALOG INPUT SPECIFICATIONS
(20Hz to 20kHz), Rs=150Ω
GAIN
For use with
nominal
Nominal
50-600W Mics
& 600W Lines
-62dBu
-42dBu
10kW
+10dBu
+30dBu
600W Lines
-10dBV
+10dBV
+66dB
INPUT 1-8
-6dB
Input level
Actual load
impedance
ST IN 1,2
Connector
Max.
before clip
Euroblock*
RCA Pin Jack**
ANALOG OUTPUT SPECIFICATIONS
Output terminal
Actual Source
Impedance
For use with
nominal
75Ω
10kΩ Lines
OUTPUT 1-8
Output level
Max.
before clip
+4dBu
+24dBu
Connector
Nominal
Euroblock*
DIGITAL INPUT AND OUTPUT SPECIFICATIONS
Terminal
YDIF In
Format
Level
IN/OUT
YDIF
RS-422
16 IN
Connector
RJ45
Phantom Power
+48V
YDIF Out
YDIF
RS-422
16 OUT
RJ45
Crosstalk (@1kHz)
-100dB
Primary / Secondary
Dante
1000base-T
16 IN / 16 OUT
RJ45
Heat diffusion
55.9kcal/h max
Power requirements
Power consumption
AC100V-240V 50Hz/60Hz
65W
Dimensions (W x H x D)
Weight
480 x 88 x 351mm (18.9" x 3.4" x 13.9"), 2U
6.3kg (13.9lbs)
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
CONTROL I/O SPECIFICATIONS
Terminal
Format
Level
—
0V-5V (IN16 Withstand voltage +24V)
Euroblock
—
Open Collector
Euroblock
—
DC5V
Euroblock
Network
Ethernet 100Base-TX
—
REMOTE
—
DCP
—
IN
GPI
OUT
16IN / 8OUT
+V
Connector
RJ-45
RS-232C (BAUD RATE : 38.4kbps or 115.2kbps) D-sub 9pin (Male)
—
RJ-45
BLOCK DIAGRAM
DIMENSIONS
366
4
351
unit : mm
88
480
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising