FiT RAID SUBSYSTEM

FiT RAID SUBSYSTEM
FiT RAID Subsystem
FiT RAID SUBSYSTEM
Quick Installation Guide V1.0
Thank you for purchasing FiT Series RAID subsystem. This quick installation
guide will help you to setup FiT Series RAID subsystem. If you want to setup
advanced configurations for FiT Series RAID subsystem, please refer to FiT
user’s manual for more information in CD.
Box Contents
z
FiT RAID Subsystem x 1
z
SATA to eSATA Cable Kit x 1
z
HDD Trays x 3 (for FiT300E/F only)
z
eSATA to eSATA cable x 1
z
HDD Trays x 4 (for FiT400E/F only)
z
USB2.0 Type A to B cable x 1
z
HDD Trays x 5 (for FiT500E/F only)
z
1394a to 1394b cable x 1 (for
z
Fan Module x 1
z
90W Power Adapter x 1 (for FiT300E/F
z
z
only)
Power Cord x 1
z
User’s Manual and software CD x 1
z
Quick Installation Guide
FiT300/400/500F only)
1394b to 1394b cable x 1 (for
FiT300/400/500F only)
FiT RAID Subsystems
Front View
FiT300E/F
FiT500E/F
Quick Installation Guide -
2-
FiT RAID Subsystem
FiT RAID Subsystem
Rear View
FiT400E/F
FiT300E
LED
Power
LED is “Blue” when the system is power on.
Status
Fail
LED is “Red” when system or hardware is failed.
Link/Access
LED is “Blue” when system links to a computer machine;
FiT300F
LED is blinking as “Blue” when data is accessed.
Fan Fail
LED is “Yellow” when either one of fans is failed.
FiT400F
(For FiT400E/F only)
Over Temp.
LED is “Yellow” when FiT RAID subsystem’s temperature is
(For FiT400E/F only)
over 58℃.
Disk Power
LED is “Blue” when disk is on-line.
Disk Fail
LED is “Red” when disk is off-line.
FiT400E
Quick Installation Guide -
3-
Quick Installation Guide -
4-
FiT RAID Subsystem
FiT RAID Subsystem
Quick setup
Setup RAID volume by Rotary Switch
FiT RAID Subsystem supports a RAID rotary switch at the back for setting up your RAID volume
immediately. No. 0~7 present different modes of RAID volume. By RAID rotary switch, FiT RAID
Subsystem would consume all of hard drives you inserted to create a single RAID volume. Each
RAID mode is described as below:
RAID
GUI
Modes
R5
Large
PM
R0
R1/R0
FiT500E
FiT500F
Clone
R3
Create RAID volumes via FiT Manager.
Create a RAID5 volume which requires at
least 3 x HDDs
Create a big volume without RAID feature
Create no RAID volume as JBOD mode
Create a RAID0 volume which requires at
least 2 x HDDs
Create a R1/R10 volume which requires at
least 2 or 4 x HDDs
Create a clone volume and all of hard disk is
backup to each other.
Create a RAID3 volume which requires at
least 3 x HDDs
System Requirements
Computers with eSATA3.0Gb, USB2.0 or 1394a (1394b) interfaces. Systems
support RAID volumes beyond 2TB and multiple volumes (port multiplier),
please check the compatibility list and AXUS white paper.
Quick Installation Guide -
5-
i.
Create a RAID volume
(1)
Turn the rotary switch to one of RAID modes.
(2)
Hold pressing “Set/Mute/Backup” button and power on FiT RAID Subsystem.
(3)
Release “Set/Mute/Backup” button about 5 seconds after FiT startup.
Quick Installation Guide -
6-
FiT RAID Subsystem
FiT RAID Subsystem
One Button Backup
FiT RAID subsystem provides
users an easiest way to backup
data by pushing one button. Please refer to the user’s manual for more information.
ii.
Delete a RAID volume
(1)
Turn the rotary switch to “PM” mode.
FiT RAID Subsystem supports multiple interfaces connected to the host computers. In the
(2)
Hold pressing “Set/Mute/Backup” button and power on FiT RAID Subsystem.
meantime, users can only access data via either one of following interfaces: USB2.0, eSATA and
(3)
Release “Set/Mute/Backup” button about 5 seconds after FiT startup.
the host computer.
Connect FiT to host computer
Firewire 800 (1394b). Below figure shows how interface cables connected between FiT300F and
NOTE !
Setup RAID Volume by LCM : see the FiT user’s manual
Setup RAID Volume by GUI : see the FiT user’s manual
Quick Installation Guide -
7-
Quick Installation Guide -
8-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising