CV225-MB/M Quick Start Guide

CV225-MB/M Quick Start Guide
SPECIFICATIONS
CV225-MB/M Quick Start Guide
CV225
SPECIFICATIONS
OSD Control
Full HD Lipstick 2.5MP
IP67 rated Weatherproof Camera
HDSDI
&mega)
RS485 operability
Image Sensor with 3GSDI,
1/3” Progressive CMOS
(Approx. 2.5
080 HD-SDI Weatherproof Miniature Camera
CV225-M (Signal type: 1080i/p 60 or 1080i/p 30)
CV225-MB (Signal type: 1080i/p 59.94)
SDI Out
RS-485
12VDC
SDI Out
PRECAUTIONS
WARNING

CAUTION

Do not use the camera if fumes, smoke or a strange odor is emitted
from the unit, or if it seems to not function correctly. Disconnect the
power source immediately and consult your supplier.
Always follow the instructions in the installation guide when
applying power. Fire and equipment damage can occur if power
is applied incorrectly. For the correct power supply, refer to the
To prevent damage, do not drop the camera or subject it to strong
 OSD Control

CAUTION

CAUTION
Functions
OSD Control
Video SDI (BNC)
Output
Whether or not the camera is used outdoors, never point it toward
the sun. Use caution when operating the camera in the vicinity of spot
Do not use the camera in extreme environments where high
temperatures or high humidity exists. Use the camera under
conditions where temperatures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is below 90%.
REGULATORY NOTICE
is device complies with part 15 of the FCC Rules.
device
complies
withtwo
partconditions:
15 of the FCC Rules.
peration isThis
subject
to the
following
Operation
is subject
to the following
two conditions:
) This device
may not
cause harmful
interference,
and
(1)
This
device
may
not
cause
harmful
interference,
) This device must accept any interference received,
including
This
device
must
accept operation.
any interference received,
erference(2)
that
may
cause
undesired
including interference that may cause undesired
operation.
12VDC
FEATURES
RS-485
CVBS (BNC)
Control RS-485
interfere with or distort the image.
CAUTION

Connectors
DSS ( ~X64)
12VDC
shock or vibration.
If installed close to a TV, radio transmitter, magnet, electric motor
NTSC: 1/30~1/30000
RS-485PAL: 1/25~1/30000
Do not install or operate in small, unventilated areas. Heat build up
CAUTION
CAUTION
Electronic Shutter
Operation Temperature
OSD
Control
Power Input
General Power consumption
Dimensions (W X H X D)
Net Weight
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
RS-485
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
3G/HDSDI Out
720p@25/30
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75Ω, unbalanced generator(single-ended)
12VDC
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
-10℃ ~ 50℃
12VDC (7VDC to 15VDC)
Max 6W
19.5 X 19.5 X 62.5mm / 0.76 X 0.76 X 2.46”
Approx. 80g/0.17Lbs (With Cable)
CV225-MB/M Dimensions
DIMENSIONS
62.5
19.5
19.5
!
Scanning System
16:9 Progressive
Sync. System
Internal
Sensor
Features
1920(H) x 1080(V)
NAMEEffective
andPixel
CONNECTION
Min. Illumination
0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Resolution
1,000TVL Scan Sensor
• 1/3” 2.5 Horizontal
Megapixel
CMOS Progressive
OSD Control
Optics Lens IP67 rated Housing
Fixed HD
• Weatherproof
forlens
outdoor applications
WDR/BLC
• 3G/HDSDI (BNC): SMPTE 292M,
SMPTE424M
Back Light Compensation
HLC (High
Light0.005Lux
compensation)
• 0.2Lux (Day Color), 0.1Lux (Night
B/W),
(DSS On)
Exposure
Auto / Manual
• Optical Multi
Coated ICR Filter
• WDR / BLC, 3D-DNR, DigitalAuto
Image
Stabilizer, Flicker-less, Defog
(3,000°K~8,000°K)
• Fine tune
control
Gamma
White
Balancefor Black Level
ATW and
(1,900°K~11,000°K)
• Full OSD control & RS-485 Manual
• Functions
12VDC Day & Night System
AGC / TDN (ICR)
eatherproof IP67 rated Housing for outdoor applications
I (BNC): SMPTE 292M, SMPTE424M
Lux (Day Color), 0.1Lux (Night B/W), 0.005Lux (DSS On)
tical Multi Coated ICR Filter
DR / BLC, 3D-DNR, Digital Image Stabilizer, Flicker-less, Defog
ne tune control for Black Level and Gamma
ll OSD control & RS-485
VDC
CV225-MB/M
Specifications
SPECIFICATIONS
CV225
Sensor
Image Sensor
Scanning
System
Scanning
System
Sync. System
Sensor SensorSync. System
Effective Pixel
Effective Pixel
Min. Illumination
Min.
Illumination
Horizontal
Resolution
OpticsHorizontal
Lens Resolution
Design and specifications are subject to change without notice.
12VDC
SDI Out
RS-485
Marshall
Electronics
16:9 Progressive
Progressive
16:9
Internal
Power Input
12VDC (7VDC to 15VDC)
Power consumption
Max 6W
DIMENSIONS
Dimensions (W X H X D)
Design and specications are subject to change without notice.
SPECIFICATIONS
1/3” Progressive CMOS
1/3” Progressive
CMOS (Approx. 2.5 mega)
(Approx.
2.5 mega)
Internal
1920(H) x 1080(V)
1920(H) x 1080(V)
0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
0.2Lux
(Day), 0.1Lux (Night), 0.005Lux (DSS on)
1,000TVL
1,000TVL
Fixed HD lens
WDR/BLC
Optics
Lens
Fixed
HD lens
Back Light Compensation
HLC (High Light compensation)
WDR/BLC
Back Light Compensation
HLC
Light compensation)
Exposure
Auto(High
/ Manual
Auto /(3,000°K~8,000°K)
Exposure
Auto
Manual
White Balance
ATW (3,000°K~8,000°K)
(1,900°K~11,000°K)
Auto
Manual
White Balance
ATW (1,900°K~11,000°K)
Functions Day & Night System
AGC / TDN (ICR)
Manual
NTSC: 1/30~1/30000
Functions
Day & Night System
AGC / TDN (ICR)
Electronic Shutter
PAL: 1/25~1/30000
NTSC:
1/30~1/30000
DSS ( ~X64)
Electronic Shutter
PAL: 1/25~1/30000
Privacy
Mask, Image Mirror, 3DNR, Flickerless
DSS ( ~X64)
Functions
Sharpness, Defog, DIS (Digital Image Stabilizer)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Motion Detection,
Functions
Sharpness,
Defog,DSS
DIS(Digital
(DigitalShutter
ImageSpeed)
Stabilizer)
Motion
DSS (Digital Shutter Speed)
SMPTE Detection,
292M (1.485Gbps)
1080p@25/30
or 29.97
SMPTE
292M (1.485Gbps)
or 59.94
MB 1080i@50/60
model:
1080p29.97,
1080i59.94,
720p@50/60
or 59.94 720p59.94/29.97fps
Video SDI (BNC)
M model:
720p@25/30
1080p25/30, 1080i50/60, 720p25/30/50/60fps
Output
SMPTE 424M (2.97Gbps)
SMPTE 424M (2.97Gbps)
Video
SDI (BNC)
1080p@50/60 or 59.94
Output
MB model:
800mVp-p,
75Ω, unbalanced generator(single-ended)
1080p59.94fps
CVBS (BNC)
M- model:
1080p50/60fps
PELCO-P/D, SONY-VISCA Protocol
Control RS-485
800mVp-p,
75Ω, unbalanced
8Bits Data, 1Stop
Bit, No Parity,generator
2400~115200bps
(single-ended)
Operation Temperature
-10℃ ~ 50℃
Power Input
12VDC (7VDCSONY-VISCA
to 15VDC) Protocol
PELCO-P/D,
Control
RS-485
8Bits
Data, 1Stop Bit, No Parity, 2400~115200bps
General Power consumption
Max 6W
Dimensions
(W X H X D) -10°
19.5 ~X 50°
19.5 X 62.5mm / 0.76 X 0.76 X 2.46”
Operation
Temperature
Net Weight
Approx. 80g/0.17Lbs (With Cable)
General
SDI Out
” 2.5 Megapixel CMOS Progressive Scan Sensor
LCDracks.com
Net Weight
62.5
19.5 X 19.5 X 62.5mm / 0.76 X 0.76 X 2.46”
Approx. 80g/0.17Lbs (With Cable)
19.5
NAME and CONNECTION
19.5
CV225-MB/M Camera Setup
1080 HD-SDI Weatherproof Miniature Camera
CV225-M (Signal type: 1080i/p 60 or 1080i/p 30)
CV225-MB (Signal type: 1080i/p 59.94)
PRECAUTIONS
!
WARNING

CAUTION

Do not use the camera if fumes, smoke or a strange odor is emitted
from the unit, or if it seems to not function correctly. Disconnect the
power source immediately and consult your supplier.
LCDracks.com
NAME and CONNECTION
SPECIFICATIONS
OSD Control
SDI Out
RS-485
12VDC
Always follow the instructions in the installation guide when
applying power. Fire and equipment damage can occur if power
is applied incorrectly. For the correct power supply, refer to the
Do not install or operate in small, unventilated areas. Heat build up
CAUTION

CAUTION

CAUTION

To prevent damage, do not drop the camera or subject it to strong
shock or vibration.
If installed close to a TV, radio transmitter, magnet, electric motor
interfere with or distort the image.
Whether or not the camera is used outdoors, never point it toward
the sun. Use caution when operating the camera in the vicinity of spot
OSD Control
CAUTION

CAUTION
Do not use the camera in extreme environments where high
temperatures or high humidity exists. Use the camera under
conditions where temperatures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is below 90%.
REGULATORY NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CV225
Image Sensor
Scanning System
Sync. System
Sensor
Effective Pixel
Min. Illumination
Horizontal Resolution
Optics Lens
SPECIFICATIONS
1/3” Progressive CMOS (Approx. 2.5 mega)
16:9 Progressive
Internal
1920(H) x 1080(V)
0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
1,000TVL
Fixed HD lens
WDR/BLC
Back Light Compensation
HLC (High Light compensation)
Exposure
Auto / Manual
Auto (3,000°K~8,000°K)
White Balance
ATW (1,900°K~11,000°K)
Manual
Functions Day & Night System
AGC / TDN (ICR)
NTSC: 1/30~1/30000
Electronic Shutter
PAL: 1/25~1/30000
DSS ( ~X64)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Functions
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
Video SDI (BNC)
720p@25/30
Output
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75Ω, unbalanced generator(single-ended)
CVBS (BNC)
PELCO-P/D, SONY-VISCA Protocol
Control RS-485
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
Operation Temperature
-10℃ ~ 50℃
Power Input
12VDC (7VDC to 15VDC)
General Power consumption
Max 6W
Dimensions (W X H X D) 19.5 X 19.5 X 62.5mm / 0.76 X 0.76 X 2.46”
Net Weight
Approx. 80g/0.17Lbs (With Cable)
DIMENSIONS
FEATURES
62.5
1/3” 2.5 Megapixel CMOS Progressive Scan Sensor
19.5
SDI (BNC): SMPTE 292M, SMPTE424M
0.2Lux (Day Color), 0.1Lux (Night B/W), 0.005Lux (DSS On)
Optical Multi Coated ICR Filter
WDR / BLC, 3D-DNR, Digital Image Stabilizer, Flicker-less, Defog
Fine tune control for Black Level and Gamma
Full OSD control & RS-485
12VDC
19.5
Weatherproof IP67 rated Housing for outdoor applications
12VDC
RS-485
SDI Out
Marshall Electronics
Design and specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising