Radio remote control for green waste crusher - Jay

Radio remote control for green waste crusher - Jay
FREE YOURSELF FROM CABLES !
Radio remote control
for green waste crusher
SOLUTIONS
SOLUTIONS
Radio remote control solutions
for green waste crushers
With JAY Electronique’s range of
products for this type of application,
you are sure to get a radio remote
control designed with the best control
ergonomics and built to do the job,
no matter how severe the working
environment or how intensively your
equipment is used.
CHALLENGING APPLICATION WITH NUMEROUS FACTORS
Due to the constraining work conditions in which they are used, certain green waste crushers must be
controllable from a distance.
At a green waste processing centre, the crusher controls are not necessarily easily accessible by the operator
handling the waste using a loader.
When working difficult terrains with strong surface variations and drops, for safety reasons, brush cutters are
not equipped with an integrated control station.
WHY RADIO REMOTE CONTROL
A radio remote control is the ideal solution for the above two cases.
With a radio remote control, the green waste crusher can be controlled from the loader control station.
Should unwanted objects get into the crusher (such as scrap metal, rocks, etc.), the operator can quickly stop
the crusher from his control station.
With a radio remote control, your brush cutter, not equipped with an integrated control station, can be controlled from a remote location. In this way, the operator does not need to get into a hazardous situation when
performing difficult work in this type of rugged environment.
SOLUTIONS
GREEN WASTE CRUSHERS
A compact solution
pack G01B6E1
AUXILIARY
PUSHBUTTON
OPTION
2 NAVIGATION
BUTTONS
6 FUNCTION
BUTTONS
The 6 single-action buttons are assigned to control of the equipment.
If the multimode feature is activated, the two navigation buttons and
the screen are used to select one of
the movements or a specific part of
the equipment.
1 EMERGENCY STOP
PALMSWITCH
433 MHZ
Band
OPTION
Multimodes
up to 3
exploitation
modes
Extension board
with 2 On/Off
inputs + 1 ANA
Input/Output +
RS485 Modbus
VIBRATOR
OPTION
1 ON/HORN
BUTTON
Operator Module Beta 6
6 single step pushbuttons
Optionally, the auxiliary button can
be used as a validation button to
prevent unintentional control of the
equipment.
Mains power adapter
115-230VAC / 12VDC
Transceiver Elio
12 relays
12-24Vdc / 24-48Vac
Standard charger for Beta6
operator module
OPTIONS and VARIANTS
CHOIce
Variants
Options
869 MHZ Bands
Transceiver Elio 115/230 Vac
Extension board with 2 On/Off inputs + 1 ANA Input/Output + RS485 Modbus
Auxiliary pushbutton
Vibrator
Multimodes up to 3 exploitation modes
SOLUTIONS
GREEN WASTE CRUSHERS
Joystick multifunction solution
pack G01M2A1
433-434 MHZ
Band
AUXILIARY
PUSHBUTTON
The 2 joysticks are assigned to
control of the equipment.
In addition to the 6 buttons available
around the display, the joystick-type
operator module can be equipped
with mechanical selector switches
(3 areas available).
Option
Zone 3 with 1 to
2 selectors
Zone 2 with 1 to
5 selectors
OPTION
Option
Board with 12 On/
Off inputs + 2 ANA
inputs
Board with 12
relays
Board with 6 analogue outputs + 1
bypass output
CAN bus board
ZONE 1 WITH 3 TO 5
SELECTORS OPTION
Operator Module Moka
2 joysticks
Mains power adapter
115-230VAC / 12VDC
Transceiver Alto
12-24VDc /24-48VAC- /
115-230VAC
12 relays
Battery charger
+ supplementary
plug-in battery
OPTIONS and VARIANTS
CHOICE
Variants
Options
869 MHZ Bands
Board with 12 relays
Board with 12 On/Off inputs + 2 ANA inputs
Board with 6 analogue outputs + 1 bypass output
CAN bus board
Zone 2 with 1 to 5 selectors
Zone 3 with 1 to 2 selectors
Auxiliary pushbutton
SOLUTIONS
GREEN WASTE CRUSHERS
CHARGING ACCESSORIES
Ref. : PWCB060
Battery charger
Mains power adapter
Ref. : PWC
Ref. : UBCU
Plug-in battery
Ref. : PWB
TRANSCEIVER ACCESSORIES
Kit with 4 magnetic
mounts
Ref : UDWR38
Kit 1 module IR
Ref. : PWT20
OPERATOR MODULE ACCESSORIES
Removable shoulder
strap
Carrying belt
Ref. : PWM103
Ref. : UWE102
ZAC La Bâtie
Rue Champrond
F 38334 SAINT-ISMIER France
Tel. +33 (0)4 76 41 44 00
Fax +33 (0)4 76 41 44 44
For complete detailed technical information, refer to our product booklets
for Beta (P-001-EN), Gama (P-002-EN), Pika (P-003-EN), Elio (P-007-EN),
Alto (P-008-EN).
Our UC and UD product lines are also suited to this type of application.
Our documentation is downloadable from our Internet site.
www.jay-electronique.fr
The products shown in this document are subject to change.
The description, photos and characteristics are not
contractually binding.
RadioCrane, RadioDrive, RadioSafe, RadioLift, RadioGreen,
RadioBuild, RadioFarm, RadioMotion are trademarks
of JAY Electronique France.
S-601-EN-B
Zoé Communication 04 77 49 09 99
Standard charging
dock for Beta 6
operator module
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising