HDUBARTK-R 1 Channel HD Analog Video UTP

HDUBARTK-R 1 Channel HD Analog Video UTP
HDUBARTK-R
1 Channel HD Analog Video UTP
Transmitter/Reciever
User Manual
HDUBARTK-R User Manual
1 Channel HD Analog Video UTP
Transmitter/Reciever
User Manual
The 1ch HD analog video UTP transceiver transfers real-time analog video signal up to 1200m through
Cat5/5e/6 cable. It is compatible with analog video signals of CVBS, HDCVI, HDTVI, and AHD. The
transceiver consists of SV unit connecting with DVRs and RM unit with cameras. It features protections
of surge immunity and ESD
immunity. The transceiver with small volume and joinable design fits easily in many locations. (e.g., villa,
super market, office, hotel).
Application
LC
D
N
10A
250V
L
C
C
C
R
IN
C
V
D
A
Vi
D
H
&
er ve r
ow i
P ece
R
de
o
T
U
P
D
H
A
g
C
a
er
am
o
de
Vi e r
D itt
&H sm
er n
w Tr a
Po TP
U
l o
na
Features
•
•
•
•
•
•
•
Power supply:12~20V DC / 9~24V AC
Transmission signal: HDCVI, HDTVI, AHD, CVBS signals 4in1 full compatible design;
Transmission distance: 0~1200m( work with active receiver/transmitter);
Major function: Adopt twisted-pair to transit video, switch adjust transmission distance;
Safety Performance: Power high anti-interference, superior surge immunity, ESD protection and
anti-interference ability, wide-voltage DC/AC input;
Mechanics: Combined connection available, optional MIT rack, which satisfy multi channels
centralized application. Transfer video signal in real-time via twisted-pair, active video transmission
solution, max.1200m transmission distance.
Notice
1.
2.
Standard Cat5e/6 cable and 75 4 or above coax are strongly suggested for reaching the maximum
transmission distance!
Please use standard UTP cable and coax to ensure the stable transmission.
HDUBARTK-R User Manual
Panel Diagram
RM Un it
Powe r LE D
Powe r Inpu t
Switch
Vide o Inpu t
Groundin g
Video Video +
Vide o LED
SV Unit
Powe r LE D
Right View
Top View
Left View
Switc h
Powe r Inpu t
Vide o Output
Groundin g
Video Video +
Vide o LE D
Top View
Left View
Right View
Installation Steps
Please check the following items before installation, if it is missing, please contact the dealer.
•
•
•
RM Unit SV Unit
User Manual 1pc
1pc
1pc
Please follow installation steps as below:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Turn off the power of all the related devices before the installation; otherwise the device would be
damaged;
Check if the any cable has been occupied by other device;
Connect corresponding ports of cameras and other related devices with Video BNC port of TX
unit;
Connect the grounding terminal of TX unit by bare grounding wire and a pair Ethernet cable;
Connect the grounding terminal of RX unit by bare grounding wire and a pair Ethernet cable;
Connect display device and BNC port of RX unit by coaxial cable;
Connect power ports of RX and TX units by power cable;
Check the installation and connection of equipments are correct and the equipments are working
properly, then power on system;
Make sure image displays and other devices are working.
Installation Methods
Indoor Wall-mounting
HDUBARTK-R User Manual
Specification
Model Number
HDUBARTK-R
Transfer Signal Number
1,200m
Transmission Distance
Voltage Input
DC12-20V or AC9-24V
1xBNC (Male)
Video Connector
1*3 Pin Terminal
Cable Pod
Compatible Video Type
HDUBARTK-T
1 Ch Video
HDCVI, HDTVI, AHD, CVBS Signal
0-75MHz
Transfer Bandwidth
Signal Indicator
Yellow Solid ON : Power Input Normal
Anti-Interference
Green Solid ON : Signal Input Normal
>60dB
Surge Protection Coaxail Port
2KV Differential-mode
2KV Common-mode
Per : IEC61000-4-2
Surge Proctection of Line
Connector
ESD Protection
1a Contact Discharge 6KV
1b Air Discharge 8KV
Per : IEC61000-4-2
Operation Temperature
-10°C - 55°C
(0-95% Humidty)
Storage Temperature
-45°C - 75°C
(0-95% Humidty)
65g
Weight
45 x 113 x 29 (mm)
Dimesnions (W x L x H)
Genie CCTV reserves the right to change specifications without notice. Please contact your representative to
confirm current specifications.
HDUBARTK-R User Manual
Transmission Distance Table ( Recommended)
Signal Type
HDCVI
720P
HDCV I
1080P
AHD
720P/960P
AHD
1080P
HDTVI
720P
HDTVI
1080P
Transmission Distanc e
600m
500m
700m
300m
400m
400m Adjustment Diagram
The transmission distances of different signals correspond to different switch settings as below:
HDCVI720P
0-150m
RM Unit
SV Unit
150-500m
RM Uni t
Switch Setting
HDCVI080P
0-150m
RM Uni t
SV Unit
SV Unit
150-200m
RM Unit
SV Unit
500-600m
RM Unit
SV Unit
200-300m
RM Unit
SV Unit
300-500m
RM Uni t
SV Uni t
Switch Setting
AHD720P 960P
0-300m
RM Unit
SV Unit
300-400m
RM Unit
SV Unit
400-600m
RM Unit
SV Unit
600-700m
RM Uni t
SV Unit
Switch Setting
AHD1080P
0-200m
RM Unit
SV Unit
200-300m
RM Uni t
SV Unit
Switch Setting
HDTVI720P
0-50m
RM Unit
SV Unit
50-200m
RM Uni t
SV Unit
200-300m
RM Unit
SV Unit
300-400m
RM Uni t
SV Unit
Switch Setting
0-200m
Switc h Setting
RM Unit SV Unit
200-300m
RM Unit
SV Unit
300-400m
RM Unit
SV Unit
Notice
1.
Please follow the steps for troubleshooting if power cuts or image displays abnormally under the
longest transmission distance:
a. Restore switch of SV unit on 5X mark;
b. Reboot;
c. Adjust the switch when DVR works smoothly.
2.There are 2 marks of 10X on RM unit. Right mark features high definition and saturation.
HDUBARTK-R User Manual
GENIE CCTV LTD.
CCTV House, City Park, Watchmead,
Welwyn Garden City, Hertfordshire, AL7 ILT
Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543
www.geniecctv.com
HDUBARTK-R User Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising