Medical Rail Systems - provita

Medical Rail Systems - provita

Medical Rail

Systems

147

Medical Rail Systems

+

unobtrusive

+

tidy

+

many variants

General Product Introduction

Medical Rail Systems

Different rooms, different walls - one solution: Medical rail systems from provita. The systems ensure the tidy, functional attachment of medical devices by your side. Rails can be produced according to your specification to suit any hospital ward or medical practice.

By combining the provita wall mounted rail systems with the pivoting IV unit or the sliding medical rail trolleys, further flexibility and freedom of movement can be provided for patients, nursing staff and doctors.

The rails, made from polished stainless steel, can bear a load of up to 100 kg per metre and allow for the attachment of multiple devices. Each rail is fitted with potential equalisation, meaning that the dissipation of static electricity is ensured. Our integrated mounting system enables simple installation.

Numerous variation possibilities and an extensive range of accessories provide logical support to the tailor-made range:

IV-stands, monitor shelves with or without a drawer compartment, refuse bag holders, examination lights, baskets, power outlet strips and pump holders represent just a selection from the extensive product range.

Medical Rail Systems

Many product advantages to your benefit

Medical Rail

+ space-saving infusion and device management on any wall - in any room

+ flexible arrangement of necessary caring devices

+ the screwing discs with holed drills enable a quick and simple mounting

+ full access to the patient thanks to a maximum floor freedom

+ reduced risk of injury (risk of stumbling)

+ connectors made of high quality brass guarantees electrical conductivity over the entire length of the rail

+ the way it is delivered permits a time-saving assembly of the rail

+ the wall rail profile has a load capacity of up to 100 kg per meter

+ the screwing discs are covered with its correspondingly optical and shaped plastic rosette

+ the screwing discs with a galvanized surface are to be connected strongly to the bearing wall

+ every rail is equipped with an optically covered grounding ring for the safety fixation of a grounding cable of up to Ø 2,5 mm²

+ complete recyclability

+ the rail profile is closed on both sides with a plastic cap to prevent the risk of injury

Technical data overview

IV-Poles

+ effective infusion care by hanging safely IV-bottles and bags

+ safety bottle holder in accordance with DIN ISO

15375

Medical Wall Rail Carrier Unit

+ low-noise movement of IV-Poles and medical devices along the wall rail for an optimization of operating processes

+ safe use above and below light strips and care channels

+ all plastic elements are non-fading

+ enough safe distance in between both tubes once the pole reached its lowest height as a precaution of risk of injury (e.g. to avoid finger traps)

+

IV-Poles with parallel offset: additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube without affecting the functionality of the devices mounted on the outer tube

+ variable positioning of care devices and components near the patient

+ silent positioning through a combination of high quality nylon, stainless steel, sliding and needle bearings

+ stable and swiveling

+ no risk of injury because the wall rail clamps and the pivotal arm are closed with plastic caps

+ can be flexibly positioned along the wall rail in the desired working area

+ stainless steel tubes in accordance with DIN EN

10217-7

+ can be fixed in any desired working position with help of its braking lever

+ prevented penetration of liquids between both tubes by a patented sealing cap

152

P. 154

Medical Rail

Medical Rail for space-saving device management

P. 156

IV-Poles

Professional infusion management on

Medical Rails

P. 164

IWS-System and Medical Wall

Rail Carrier Unit

Pivotable, moveable device support system for infusion and device management

P. 168

Accessories

Various accessories to enhance the wall rail system

153

Medical Rail

Medical Rail

+ easily fixed to wall by rotatable pre-drilled fixings

+

einfache Montage durch drehbare

Anschraubscheiben mit Bohrlöchern

Material

Rosetten und Endkappen

Schienenprofil

Gesamtbelastbarkeit

Oberfläche

Gewicht (pro lfd. Meter)

Besonderheit optional

Edelstahl

Kunststoff / schwarz

25 × 10 × 1,5 mm max. 100,0 kg pro lfd. Meter geschliffen ca. 1,5 kg

Zwischenmaße und Sonderabmessungen möglich (bitte Detailmaße angeben); mit je 1 Potentialausgleich an jeder Schiene

• Kunststoffteile in blau / weiß

• Rosetten in Edelstahl (Z2N06242)

Material

Rosettes and end caps

Rail profile

Total load capacity stainless steel plastic / black

25 × 10 × 1,5 mm (W × H × D) max. 100,0 kg per running meter

Surface polished

Weight (per running meter) appr. 1,5 kg

Unique feature intermediate and special lengths are possible (please specify in detail); with optional

1 grounding pin on each rail

• plastic parts in blue or white

• rosettes made of stainless steel

(Z2N06242)

• with freely positionable grounding box

(Z2N06132)

Configure your individual medical rail here or under www.provita.de

!

Z2N2

05

06

07

40

O2

= 500 mm

Example: Z2N22702 =

Medical rail 2.700 mm

Z2N27241

!

Calculation of fixing bolts per rail = rail length divided by bolt distance rounded to the nearest higher integer

!

Standard bolt distance: 400 mm. Other distance possible on request (eg.: 500 mm or 600 mm).

Rails longer than 3.000 mm will be connected using preassembled connectors.

= 600 mm

= 700 mm

= 4.000 mm

= Rail in special length and / or with special bolt distance on customer request (length specification in meter)

(Z2N06132)

Konfigurieren Sie Ihre Wandschiene hier oder auf www.provita.de

Z2N2 02

05 = 500 mm

06 = 600 mm

07

= 700 mm

40

= 4.000 mm

Bsp: Z2N2 27 02

= Schiene 2.700 mm

Z2N27242

= Schiene in Sonderlänge und/oder

mit Sonderbolzenabständen nach

Kundenwunsch

(Längenangabe in Meter)

!

Berechnung der Bolzenanzahl pro Schiene =

Schienenlänge / Bolzenabstand gerundet auf die nächstgrößere ganze Zahl

!

Standard-Bolzenabstand: 400 mm

Andere Bolzenabstände auf Anfrage

(z. B.: 500 mm oder 600 mm)

!

Bei Schienen größer als 3.000 mm behaltenten wir uns vor, diese mit entsprechenden Verbindern zu versehen

Connector pre-assembled at the factory

Material brass

E2N4464-

Planning Tool

Please use the provita planning tool for medical rails.

You will save valuable time working on your projects.

www.provita.de/railplanner

Medical rail-planning tool

Medical Rail

The type of mounting needs to be evaluated on site. Our sales representatives and engineers would be glad to be of support if needed.

!

Instructions for installation please see p. 192

156

Overview IV-Poles

IV-Pole with 2 wall supports

I2002612 with 4 safety bottle hooks, screw height adjustment

IV-Pole, 55° angled

I2000572 with bottle bar 4 safety bottle hooks, screw height adjustment

IV-Pole straight

I2000422 with 4 safety bottle hooks, screw height adjustment

I1000422 with 4 safety bottle hooks, single-handed safety height adjustment

IV-Pole, 90° angled

I2000552 outer tube 1.000 mm, screw height adjustment

I2000562 outer tube 1.500 mm, screw height adjustment

Overview IV-Poles

ICU-Unit

I1009272 with 4 safety bottle hooks, singlehanded safety height adjustment

I1009292 with 6 safety bottle hooks, singlehanded safety height adjustment

IV-Pole

I1000502 without wall support, single-handed safety height adjustment

I1000522 with wall support, single-handed safety height adjustment

IV-Pole

I1002112

I2000112 single-handed safety height adjustment screw height adjustment

IV-Pole – angled

I1002212 single-handed safety height adjustment

I2002012 screw height adjustment

IV-Rod

I0001502

IV-Pole

I1002712 single-handed safety height adjustment

I2003112 screw height adjustment

IV-Holder

M0009004

IV-Pole 38/25

I1002612

!

All IV-Poles are made of high-quality stainless steel and are equipped with safety bottle hooks. Additional technical details can be found on the following pages.

IV-Pole

Overview

157

IV-Pole

158

IV-Pole with 2 wall supports

+ safe use above and below light strips and care channels

Material

Tube diameter

Bottle holder

Load capacity stainless steel

25 / 18 mm stainless steel 4 safety bottle hooks

2,0 kg / hook

Angled

Parallel offset

Outer tube length

Regulating range

2 × 90°

300 mm

1.200 mm appr. 1.460 – 2.000 mm screw height adjustment Height adjustment

Distance wall to tube center

Colour of end caps

120 mm white

Total weight (net weight) appr. 2,5 kg

I2002612

IV-Pole straight

+ effective infusion care by hanging safely IVbottles and bags

Material

Tube diameter

Outer tube length

Bottle holder stainless steel

25 / 18 mm

1.000 mm stainless steel 4 safety bottle hooks

Regulating range

Load capacity appr. 1.180 – 2.020 mm

2,0 kg /hook

Total weight (net weight) appr. 2,0 kg

I1000422

I2000422 singel-handed safety height adjustment screw height adjustment for further wall-mounted IV-Pole options, please see page 86

IV-Pole

IV-Pole, 55° angled

+ prevented penetration of liquids between both tubes by a patented sealing cap

Material

Tube diameter

Outer tube length

Distancia en paralelo

Angled

Height adjustment

Regulating range

Bottle holder stainless steel

25 / 18 mm

1.000 mm appr. 300 mm

1 × 55° screw height adjustment appr. 1.250 – 1.800 mm stainless steel 4 safety bottle hooks

Load capacity 2,0 kg / hook

Total weight (net weight) appr. 2,9 kg

I2000572

IV-Pole, 90° angled

+ enough safe distance in between both tubes once the pole reached its lowest height as a precaution of risk of injury (e.g. to avoid finger traps)

Material

Tube diameter

Distancia en paralelo

Angled stainless steel

25 / 18 mm

300 mm

2 × 90°

Height adjustment

Bottle holder screw height adjustment stainless steel 6 safety bottle hooks

Load capacity 2,0 kg / hook

Total weight (net weight) appr. 3,0 kg

I2000552

I2000562

Outer tube length 1.000 mm

Regulating range appr. 1.270 – 2.115 mm

Outer tube length 1.500 mm

Regulating range appr. 1.780 – 2.400 mm

159

IV-Pole

ICU-Unit

+ adjustment of the telescopic tube through a comfortable single-handed height adjustment

Material

Height adjustment

Bottle bar stainless steel / aluminium single-handed safety height adjustment stainless steel 4 or 6 safety bottle hooks – 2,0 kg / hook

Regulating range 370 mm

Total weight (net weight) appr. 2,1 kg

Equipment with medical rail clamp, for assembling onto wall rails 25 × 10 mm

I1009272

I1009292 with 4 safety bottle hooks with 6 safety bottle hooks

IV-Pole

+ stainless steel tubes in accordance with DIN

EN 10217-7

Material

Tube diameter

Height adjustment

Bottle holder stainless steel / aluminium

18 / 14 mm single-handed safety height adjustment stainless steel 3 safety bottle hooks –

Regulating range

Outer tube length

2,0 kg / hook appr. 1.150 mm – 1.700 mm

800 mm

Total weight (net weight) appr. 1,9 kg

Equipment with medical rail clamp, drip glass and glass holder, for assembling onto wall rails 25 × 10 mm

I1000502

I1000522 without wall support with wall support

160

IV-Pole

IV-Pole

+ all plastic elements are non-fading

Material

Tube diameter

Bottle holder stainless steel / aluminium

25 / 18 mm stainless steel 3 safety bottle hooks –

2,0 kg / hook

Regulating range

Outer tube length appr. 1.000 – 2.000 mm

1.000 mm

Total weight (net weight) appr. 1,73 kg

Equipment with wall rail clamp and wall support, for assembling onto medical rails 25 ×

10 mm

I1002112

I2000112 single-handed safety height adjustment screw height adjustment

IV-Pole – angled

+ additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube

Material

Tube diameter

Bottle holder

Angled

Distancia en paralelo

Regulating range

Outer tube length stainless steel / aluminium

25 / 18 mm stainless steel 4 safety bottle hooks –

2,0 kg / hook

2 × 45° appr. 350 mm appr. 1.180 mm – 1.510 mm

1.000 mm

Total weight (net weight) appr. 1,45 kg

Equipment with medical rail clamp and wall support, for assembling onto wall rails

25 × 10 mm

I1002212

I2002012 single-handed safety height adjustment with additional screw height adjustment to prevent a pole rotation screw height adjustment

161

IV-Pole

IV-Pole

+ the integrated blocking pull-out prevents the seperation of both telescopic tubes

Material

Tube diameter

Bottle bar stainless steel / aluminium

25 / 18 mm stainless steel 4 safety bottle hooks –

2,0 kg / hook

Regulating range

Outer tube length appr. 1.000 – 1.600 mm

800 mm

Total weight (net weight) appr. 2,03 kg

Equipment with 2 medical rail clamps, for assembling onto wall rails 25 × 10 mm

I1002712

I2003112 safety height adjustment screw height adjustment

IV-Rod

+ safety bottle holder in accordance with DIN

ISO 15375

Material

Tube diameter

Bottle bar stainless steel / aluminium

25 mm stainless steel 4 safety bottle hooks –

2,0 kg / hook

Length 1.500 mm

Total weight (net weight) appr. 1,5 kg

Equipment with 2 wall rail clamps, for assembling onto medical rails

25 × 10 mm

I0001502

162

IV-Pole

+ space-saving infusion care

Material

Tube diameter stainless steel / aluminium

18 mm

Total weight (net weight) appr. 1,8 kg

Equipment stainless steel 4 safety bottle hooks –

2,0 kg / hook, with medical rail clamp and wall support, for assembling onto wall rails 25 × 10 mm

M0009004

IV-Pole

+ safe use above and below light strips and care channels

Material

Tube diameter

Bottle bar

Outer tube length

Distancia en paralelo

Angled

Height adjustment stainless steel / aluminium

38 / 25 mm stainless steel 4 safety bottle hooks

1.000 mm

350 mm

2 × 90° single-handed safety height adjustment with additional screw height

Equipment adjustment to prevent a pole rotation with 2 wall rail clamps to mount on a

Load capacity wall rail 25 x 10 mm

2,0 kg / hook

Total weight (net weight) appr. 6,0 kg

I1002612 accessories see from page 168

IV-Pole

163

164

IWS-System and

Medical Wall Rail

Carrier Unit

Medical rail systems

IWS-System and Medical Wall Rail Carrier Unit

IWS-unit

+ the stable and flexible support systems allows an extensive and patient-related placement of medical devices

+ for mounting infusion pumps and bottles

+ easily fixed to the existing wall rail

Regulating range

Load capacity

1.500 – 2.450 mm

2,0 kg per hook / 25,0 kg per system

Total weight (net weight) appr. 9,0 kg

Equipment 1 stainless steel tube Ø 33,7 mm,

2 horizontal arms, 2 mounting brackets for medical rails, 1 stainless IV-pole with screw height adjustment, bottle bar with 6 safety bottle hooks

I9971702

!

This pivotable wall-system and the moveable wall carrier unit can be used as single parts or in combination for application pictures see page 172

Duo-Lock-System for wall rail

+ compact space requirement

+ horizontal adjustment in two directions

Material

Colour of plastic parts

Tube diameter

Bottle holder

Height adjustment

Regulating range

Outer tube length

Equipment stainless steel / aluminium blue

25 / 18 mm stainless steel 4 safety bottle hooks -

2,0 kg / hook single-handed safety height adjustment appr. 1.500 – 2.350 mm

1.200 mm

2 duo-lock-systems with quick-handfastener, IV-Pole

I-DULO01

165

Moveable Medical Rail Carrier

Version A

Version B

166 examples of use

Moveable Medical Rail Carrier

+ smooth running wall carrier unit to attach pumps, monitors and additional devices

+ high quality stainless steel and nylon bearings ensure minimal noise when moving

+ allows the flexibility to position devices where required

Version A

Material of the carrier unit aluminium

Material support tube

Colour of carrier unit

Tube diameter

Tube length stainless steel white

38 mm

1.000 mm

Max. load capacity 75,0 kg

Total weight (net weight) appr. 4,2 kg

Equipment with 2 complete carrier units, carrier unit and tube flexibly adjustable

!

Attention: Medical rails must be mounted exactly parallel to each other, with clamping lever brake at the top carrier

Z2N0214A

Version B

(like A, additionally with IV-pole)

Height adjustment single-handed safety height adjustment

Tube diameter

Bottle bar

38 / 25 mm stainless steel 4 safety bottle hooks

Regulating range appr. 1.100 – 1.900 mm

Total weight (net weight) appr. 5,6 kg

Outer tube length 1.000 mm

Z2N0224A optional with angled IV-pole to protect the devices from liquids

Z2N0225A

!

Please order the stopper-set separately.

Accessories Medical Rail Carrier Unit

Accessories Medical Rail

Carrier Unit

Medical Rail for round tube Ø 38 mm, height adjustable through two fixing screws

Material

Profile stainless steel / aluminium

25 × 10 mm

Length

Weight

558 mm appr. 0,9 kg

Z2N06512

Monitor Shelf without Drawer for round tube Ø 38 mm, with edge protection

Material stainless steel / steel, coated

Shelf dimensions

Max. load capacity

Weight

540 × 360 mm

40,0 kg appr. 6,0 kg

Z2N0745A

Monitor Shelf with Drawer for round tube Ø 38 mm, with edge protection

Material shelf stainless steel

Material drawer

Shelf dimensions steel, white coated

540 × 360 mm

Drawer size

Drawer height

Max. load capacity

Weight

420 × 310 mm

120 mm

40,0 kg appr. 10,1 kg

Z2N0746A

Shelf for round tube Ø 38 mm, with edge protection

Material stainless steel / aluminium

Size

Max. load capacity

Weight

300 × 250 mm

4,0 kg appr. 2,75 kg

Z2N0754A

Stopper-set for Wall Rail for wall rails 25 × 10 mm

Material

Colour aluminium white

Z2N0628A for application pictures see page 172

167

Accessories

Medical rail systems

Basket with clamp with wall rail clamp, to mount on wall rail 25 x 10 mm

Material of the basket steel, coated

Material of the claw

Colour aluminium light grey

Size

Weight

250 × 90 × 200 mm (W × D × H) appr. 0,7 kg

Z2S0665N

Basket with 2 clamps with two wall rail clamps, to mount on wall rail 25 x 10 mm

Material of the basket steel, coated

Material of the claws

Colour aluminium light grey

Size

Weight

500 × 120 × 100 mm (W × D × H) appr. 1,15 kg

Z2S0666N

168

Cable- /tube holder

Material

Colour plastic white

Z2K09343

Z2K09353 for round tube 38 mm for wall rails 25 × 10 mm

Medical Approved

Plugboard vari med with children protection (higher touch protection of plug board)

Material of housing aluminium, anodized

In accordance with norm DIN EN 60601-1-1

Z2K07014 4-plug, dual fused for additional medical plugboards see www.provita.de and page 83

Accessories

Monitor Shelf without Drawer with two medical rail clamps and wall supports, with edge protection

Material

Shelf dimensions stainless steel / steel, coated

540 × 360 mm

Max. load capacity

Weight

40,0 kg appr. 6,0 kg

Z2N07442

Glass Monitor Shelf without Drawer with two medical rail clamps and wall supports, with edge protection

Material

Shelf dimensions stainless steel / safety glass / aluminium

540 × 400 mm

Max. load capacity

Weight

40,0 kg appr. 6,0 kg

Z2N07432 with 1 drawer

Z2N07532 with 2 drawers

Z2N07922 weight appr. 10,1 kg appr. 14,7 kg

Glass Monitor Shelf with Drawer drawer, fully extendable, with two medical rail clamps and wall supports, with edge protection

Material shelf

Material drawer safety-glass, non-transparent steel, white coated

Shelf dimensions

Drawer size

Protective edging

540 × 400 mm

420 × 320 mm safety rubber edging

Shelf with two medical rail clamps, with edge protection

Material stainless steel / aluminium

Shelf dimensions

Max. load capacity

Weight

300 × 250 mm

4,0 kg appr. 2,75 kg

Z2N07932 with 1 drawer

Z2N07942 with 2 drawers weight appr. 10,1 kg appr. 14,7 kg

Z2N07332

Monitor Shelf with Drawer drawer, fully extendable, with two medical rail clamps and wall supports

Material shelf

Material drawer stainless steel steel, white coated

Shelf dimensions

Drawer size

Drawer height

Max. load capacity

540 × 360 mm

420 × 310 mm

120 mm

40,0 kg optimal hygienic glass surface

Glass Monitor Shelf with wall rail at the sides drawer, fully extendable, with two medical rail clamps and wall supports, with edge protection

Material shelf

Material drawer safety-glass, non-transparent steel, white coated

Shelf dimensions

Drawer size

Protective edging

Material wall rails

Length of each wall rail

Rail profile

540 × 400 mm

420 × 320 mm safety rubber edging stainless steel

320 mm

25 × 10 × 1,5 mm (W × H × D)

Z2N07962

169

Accessories

+ proven light source as an economic alternative

Colour of lamp

Light source

Light colour

Light output

Light field

Life expectancy

Electrical mains

Switch white halogen bulb with cold light reflector,

12 V / 35 W IRC, 10° appr. 3.000 (3.700) 1 K appr. 28.500 lux / 500 mm appr. 8.100 lux / 1.000 mm

Ø 90 / 180 mm at 500 / 1.000 mm appr. 3.000 h (light source)

230 V, 50 – 60 Hz in lamp housing / in handle (Ceiling / Wall version)

170

Trash Holder with wall rail clamp, to mount on wall rail 25 × 10 mm

Material stainless steel / aluminium

Size

Weight

Unique feature

245 × 385 × 185 mm (W × H × D) appr. 2,0 kg complete with 3 trash bags

Z2N06202

Examination Lamp

Colour of lamp

Light source

Light colour

Light output

Light field

Life expectancy

Electrical mains

Switch white halogen bulb with cold light reflector,

12 V / 35 W IRC, 10° appr. 3.000 (3.700) 1 K appr. 28.500 lux / 500 mm appr. 8.100 lux / 1.000 mm

∅ 90 / 180 mm at 500 / 1.000 mm appr. 3.000 h (light source)

230 V, 50 – 60 Hz in lamp housing / in handle (Ceiling /

Wall version)

1) with colour correction filter

Clamps to fit lamps, IV-poles as well as additional equipment, to mount on wall rail 25 × 10 mm

Material

Weight aluminium, ball burnished appr. 0,4 kg

L100020A wide range of lamps see pages 12 to 45

Z2N0643W

Z2N0647W

Z2N0650W with headless screw, with socket

Ø 18 mm with t-screw, with socket Ø 18 mm with t-screw, with socket Ø 25 mm

Set of 2 Medical Rail

Clamps with Ø 25 mm socket, for bridging two wall rails with different installation depths

Material

Colour aluminium white

Weight

Unique feature appr. 0,8 kg

1 clamp adjustable (100 – 200 mm)

1 clamp fixed length

Z2N0618A

Holder for pumps with wall rail clamp, to mount on wall rail 25 × 10 mm

Material stainless steel / aluminium

Tube diameter

Length

Weight

25 mm

500 mm appr. 0,95 kg

Z2N07162

Joint Arm with hose clamps (appr. Ø 23 mm), without medical rail clamp

Material chrome plated

Working radius

Joining pin

Weight appr. 1.000 mm

Ø 18 × L 35 mm appr. 2,0 kg

Z2S06527

Accessories

Gloves dispenser, 3-fold for wall rail with wall rail clamp, to mount on wall rail 25 × 10 mm

Material stainless steel / aluminium

Outer size

Inner size

240 × 403 × 99 mm (W × H × D)

(each compartment)

Weight

240 × 132 × 96 mm (W × H × D) appr. 2,5 kg

Z2N65522

Catheter basket

Material

Mounting

Weight stainless steel two hooks for wall rail appr. 0,5 / 0,8 kg

Z2N08122

Z2N08132

150 × 100 × 280 mm (W × H × D)

150 × 100 × 480 mm (W × H × D)

Gloves dispenser, 2-fold for wall rail with wall rail clamp, to mount on wall rail 25 × 10 mm

Material aluminium, coated

Colour

Size

Weight silver

280 × 270 × 100 mm (W × H × D) appr. 1,3 kg

Z2N09353

Claw with quick-release lever to mount on wall rail 25 × 10 mm

Material aluminium, anodized

Weight appr. 0,1 kg

Z2N0932W

Gloves dispenser, 3-fold for wall rail with wall rail clamp, to mount on wall rail 25 × 10 mm

Material aluminium coated

Colour

Size

Weight silver

390 × 260 × 100 mm (W × H × D) appr. 1,5 kg

Z2N09363

Catheter Storage Box, dust-tight

Material

Fixing

Hygiene stainless steel welded-on hook rail for attachment to carts or medical rails with hinged, bevelled cover and base for easy cleaning; autoclavable

Z2N08142

Z2N08152

Z2N08162

500 × 140 × 90 mm

600 × 140 × 90 mm

700 × 140 × 90 mm

+

Enables dust-tight, hygienic storage

+

Catheters will not be bended

!

Can optionally be ordered with inspection window or subdivision

!

The hinged base can be folded away for easy cleaning from top and bottom

171

Application examples

172

Application examples

173

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement