Archived: IMAQ 2504 Cable Installation Guide
INSTALLATION GUIDE
IMAQ 2504 CABLE
This guide describes how to attach the IMAQ 2504 cable to your image
acquisition (IMAQ) device. The IMAQ 2504 family of cables includes the
A2504 and D2504 cables. You can use the IMAQ A2504 cable with IMAQ
analog devices and the IMAQ D2504 with IMAQ digital devices.
Use the IMAQ A2504 cable to connect three additional video channels and
one trigger channel to your IMAQ device using the IMAQ analog device’s
external 25-pin DSUB I/O receptacle.
Use the IMAQ D2504 cable to connect four external trigger sources to your
IMAQ digital device via the IMAQ D100 camera cable.
What You Need to Get Started
To install your IMAQ 2504 cable, you will need the following:
❑ One of the following IMAQ 2504 cables:
–
IMAQ A2504 cable for analog IMAQ devices
–
IMAQ D2504 cable for digital IMAQ devices
❑ IMAQ 2504 Cable Installation Guide
❑ Your IMAQ device
❑ BNC cables
❑ Your computer
❑ Your camera or other video or trigger signal source
♦
IMAQ D2504 only
❑ IMAQ D100 camera cable and documentation
IMAQ ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective
companies.
321535B-01
© Copyright 1997, 1998 National Instruments Corp. All rights reserved.
March 1998
Installation
♦
IMAQ A2504 cable
Insert the DSUB connector end of the IMAQ A2504 cable, shown in
Figure 1, into the IMAQ device’s external 25-pin DSUB receptacle,
ensuring correct polarity. Tighten the thumbscrews as necessary.
You can now connect up to four BNC cables to the other end of the
IMAQ A2504 cable for access to three additional video channels, V1,
V2, V3, and one trigger channel, T0, as shown in Figure 2.
♦
IMAQ D2504 cable
Insert the DSUB connector end of the IMAQ D2504 cable, shown in
Figure 1, into the 25-pin DSUB receptacle on the IMAQ D100 camera
cable.
You can now connect up to four BNC cables to the other end of the
IMAQ D2504 cable for access to four external trigger sources, T0, T1,
T2, and T3, as shown in Figure 3.
1
13
14
25
Figure 1. IMAQ 2504 25-Pin Connector
V1
V2
V3
T0
Figure 2. IMAQ A2504 BNC Connectors
T0
T1
T2
T3
Figure 3. IMAQ D2504 BNC Connectors
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising