cyclop ewt Easy to move, quick to set up and with the best sound for any application: these are the main features of the new LEM’s CYCLOP EWT, a 3-way bi-amplified system made of two passive satellites and a subwoofer that integrates in its cabinet the amplifiers and all the electronics needed to drive the system at the best. Derived from the successful LEM Cyclop system, CYCLOP EWT offers a series of new features that greatly improve its performances and audio quality. Designed to be the ideal sound system for live musicians and mobile DJs, CYCLOP EWT system is also suitable for installations in clubs, pubs and public venues. Cyclop EWT Sat Cyclop EWT Sat utilizes for the top end a 1” compression driver loaded on EWT horn, which provides uniform dispersion and a clear and refined sound even at critical levels. A sophisticated, non-intrusive electronic circuit protects the HF driver against power overloads, ensuring maximum reliability. The custom made 8'' midrange speaker features an accurate response in the mid-low range for the best voice intelligibility. Cyclop EWT SAT can handle 150W of continuous power and is equipped with a SPEAKON for the connection with the amplifier hosted in the sub. The extended and flat frequency response allows the satellite to be used also as a full-range speaker, powered with an external amplifier. For this reason, thanks also to the 4 M8 flying points available on the cabinet, Cyclop EWT SAT can be used also in fixed installations without using the subwoofer. Cyclop EWT Sub The Cyclop EWT SUB features a high-excursion custom made 15'' woofer in bass-reflex configuration, able to generate a remarkable sound pressure and to provide the perfect low-frequency extension for the system. The built-in power module includes one 300W amplifier for the sub and two 150W amplifiers for the satellites, with a series of sophisticated features for the total control of the system: • active EQ circuit for the optimisation of the system response and the best acoustic performance • 24dB/oct. active crossovers for the optimal separation of the frequencies to be sent to the satellites and to the sub-woofer • three different anti-clipping circuits for the protection of the speakers against overloads, in order to avoid any damage or distortion TECHNICAL SPECIFICATIONS loudspeaker specifications components high low Power handling (EIA RS-426A) Watt continuous Watt peak impedance Ohms passive crossover Hz cyclop sat cyclop sub 1" compression driver on EWT horn 8" woofer 15" woofer 150 300 300 600 8 3500 @ 12-18dB/oct. 1 x SPEAKON connections MDF with black scratch-resistant paint - 4 M8 flying points - protection metal grid construction dimensions mm (WxHxD) weight kg amplifier specifications EIA output power (1kHz, max THD 1%) Watt input sensitivity impedance active crossover Hz distortion % 274x430x242 546x476x545 10 41,5 cyclop sat cyclop sub 2 x 150 300 0dB (0.775V) 30kohm (balanced) - 15kohm (unbalanced) 180 @ 24dB/oct. <0.02 (THD+Noise) power output volume - shield on/off controls 2 x jack + 2 x xlr-f (signal input) - 2 x speakon (power output) connections see label on the apparatus power supply system specifications sensitivity MAX SPL continuous freqeuncy response Hz (-10dB) dispersion (oxv) ˚ 120dB 40 - 20k 60x40 GENERALMUSIC via delle rose, 12 s. giovanni m. (rn) 47842, italy tel. +39 0541.959511 fax +39 0541.957404 www.lemaudio.com 371390 ENG Generalmusic reserves the right to change specifications without notice. The enclosed trademarks are properties of their respective owners. Cabinet The Cyclop EWT cabinets are built in Medium Density Fiber (MDF) finished with black scratch-resistant paint. Each cabinet is fitted with a speaker stand adaptor, handles and metal grille for protection. Cylop EWT SAT, moreover, features 4 M8 flying points for wall or ceiling mounting. The Cylop EWT Sub also includes four wheels on the back panel and its front panel is designed in order to accommodate the two satellites for the easiest transportation possible.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project