CA30/1000
DISTRIBUTION
Active Components
CA30/1000
1GHz Broadband Push-Pull Distribution Amplifier
Broadband 54-1000MHz
frequency range
(Channels CATV 2-158)
30dB gain for optimal carrierto-noise ratio and superior
picture quality
± 0.5dB flatness across band
provides low distortion and
excellent frequency response
Employs state-of-the art hybrid
push-pull technology for distortion-free audio-video quality
Adjustable slope and gain controls for easy system balancing
Easy-access controls and lowloss (-20dB) test point enable
simplified setup and
performance monitoring
Shielded enclosure provides
over 95dB RFI shielding performance reducing leakage and
ingress
Built-in lightning and line voltage surge protection protects
the unit from damage
Black anodized extruded aluminum heat-sink maximizes
heat dissipation for improved
reliability and corrosion
resistance
Also available in a rack mount
version as CA30RK-1000
Headend Amplifier
www.picomacom.com
CA30/1000
1GHz Broadband Push-Pull Distribution Amplifier
The Pico Macom CA30/1000 is a high quality push-pull wall-mounted distribution amplifier producing signals with extremely low-noise and harmonic distortion.
The amplifier is capable of broadband 158-channel operation over the 541000MHz range. This amplifier makes an excellent distribution system amplifier
for heavily loaded MDU and broadband CATV and SMATV systems. Because
of its extremely low-noise figure and low distortion, the CA30/1000 is ideally
suited for use in larger networks where amplifier cascading is required. In
expanding bi-directional broadband systems the CA30/1000 can be used in conjunction with Tru-Spec Sub CATV diplexers to split forward and reverse paths.
Alternately Pico Macom’s PIDA series bi-directional amplifiers may be used.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
B-5
Rev. 12/02
Product Specifications
CA30/1000
1GHz Broadband Push-Pull Distribution Amplifier
MAX
INPUT
OUTPUT
MAX
TILT
GAIN
MODEL CA30-1000
-20dB
INPUT TEST
-20dB
OUTPUT TEST
CATV DISTRIBUTION AMPLIFIER
54-1000 MHZ
POWER IN
AC 117V
30dB GAIN
Specifications
54-1000 MHz
30 dB
12 dB
9 dB
± 0.5 dB (54-1000 MHz)
45 dB (54 channels
-57 dB cross modulation)
7.5 dB
-60 dB (129 channels
@ 13 dBmV input level)
-58 dB (129 channels
@ 13 dBmV input level)
Bandwidth:
Gain:
Gain Adjust Range:
Slope Adjust Range:
Flatness:
Max. Output:*
Noise Figure:
Second Order Beats:
Composite Triple Beat:
-62 dB (129 channels
@ 13 dBmV input level)
>20 dB to 800 MHz
>12 dB to 800-1000 MHz
-20 dB
115 VAC, 60 Hz, 4 W
-10° to +50° C
8˝(L) x 23/4˝(D) x 41/2˝(H)
2.5 lbs.
Cross Modulation:
Return Loss In:
Return Loss Out:
Test Points:
Power Requirements:
Operating Temperature:
Dimensions:
Weight:
Channel Loading Specifications
Total # of
Channels
7
12
36
54
78
108
125
158
Max. Input
Level
44
41
32
23
18
14
11
8
Max. Output Level
@ Max Slope
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
66
63
54
45
40
36
32
30
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
dBmV
Ordering Information
CA-30/1000
Specifications Subject to Change
B-6
Rev. 12/02
© Copyright 2003 Pico Macom, Inc.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
www.picomacom.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising