Side 2 8 17 9 14 15 10 11 13 16 12

Side 2 8 17 9 14 15 10 11 13 16 12
Side 2
8
9
Install Hard Drives/Carriers
A
Remove the screw securing the drive carrier to
the chassis.
B
Slide the carrier away from the two chassis
sidewall pins and remove.
A
C
Attach a SATA data cable to each hard drive as shown.
Use the cable clips provided with your chassis to maintain
proper air flow.
Left-side SATA 0 Hard Drive
D
Note: Hard drive 1 location is shown above.
Attach the hard drive to the carrier with
four screws as shown.
F
Re-install the hard drive/carrier assembly
into the chassis.
Attach the RIGHT bracket to the optical device.
D
E
F
B
A
G
F
Attach optical device tray to chassis standoff and hard disk drive
cage as shown.
Connect SATA data cable to optical device and
server board SATA connector as shown.
F
ev
ice
E
D
A Remove filler panel from the add-in card slot.
B Insert add-in card until it seats in the riser connector.
C Secure add-in card with screw as shown.
G
Riser Connector
14
B
C
15
Install the Top Cover
Place cover onto
chassis and slide
forward.
Install two screws
at front.
Install Rack
Handles
16
assembly into
place and secure
with the screw.
Riser Assembly
Supports one
PCIe* card.
A
Riser
Socket
Finishing Up
Before installing your operating system, you must finish your system
installation and connect back panel I/O connectors and AC power.
Platform Cabling Diagram
1. Make sure you have replaced the system cover.
C
2. Connect your keyboard, mouse, video
and other I/O cables/devices as shown.
Then connect the AC power cord.
Attach with one
screw at rear.
A
AC Power
CAUTION: This unit must
be operated with the TOP
COVER installed to ensure
proper cooling.
NIC2
NIC4
NIC5
Network
Network
Network
See the documentation that came
with your selected rail kit for
installation instructions.
the operating system.
D. Install Operating System Drivers: With the operating system running, insert the Intel® Server
Deployment Toolkit CD. If using a Microsoft* Windows* operating system, the Express Installer will autorun
and allow you to select the appropriate drivers to install. On other operating systems, browse the CD folders
to locate and install the driver files.
A
B
C D E F G H I J
Optional Accessories/Spares and Order Codes
Fixed mount bracket kit
SATA Slim-line DVD
SATA Slim-line DVD +/- re-writable
Low profile half-length PCIe2 riser
Spare 350W HE power supply
Blower Spare Kit
RMM3 lite
AXXBRACKETS
AXXSATADVDROM
AXXSATADVDRWROM
AHJTPCIERISER
FHJT350HEPS
FHJTBLOWER
AXXRMM3LITE
A complete list of accessories and spares can be found at:
http://www.intel.com/go/serverbuilder
J1D1
BMC
Force
Update
J1E1
TPM
Disable
J2E1
ME
Force
Update
J1F1
Password
Clear
J1F2
BIOS
Ricovery
J1F3
Dual Intel® I/O
Expansion Module
Connectors
Internal
Serial
Port
Front Panel
Connector
Intel® RMM3 Lite
Internal
USB
F
RJ-45
GbE(NIC5) and
Dual USB combo
connector
System Fan 4
CPU Power
Connector
CMOS Battery
Dual port
RJ-45
GbE LAN
Connector
NIC3 and NIC4
CPU Fan
Connector
SATA 5
Internal
USB SSD
SATA 2
SATA 4
SATA 1
SATA 3
SATA 0
IPMB
HSBP
Power Supply
AUX Connector
SAS Module
Connector
SATA_SGPIO
Internal USB
Floppy Connector
SYS_FAN 1
SYS_FAN 2
SYS_FAN 3
I
J
C
Optical Device
Dual port
RJ-45
GbE LAN
Connector
NIC1 and NIC2
Main
Power
Connector
M
N
Note: Refer to the Technical
Product Specification for
Diagnostic LED decoder list.
Processor Socket
Internal
USB
CMOS
Clear
J1F5
Video
RJ-45
Serial port
Connector
Chassis
Intrusion
Header
Diagnostic/ID
Status LEDs
DIMM_B1
B. Configure your RAID Controller: Use the instructions provided with the RAID controller.
C. Install your Operating System: Use the instructions provided with the RAID controller and with
A USB 2.0 Port
B. Power Button
C. Status LED
D. Power
E. HDD Activity
F. NIC1
G. NIC2
H. NIC3
I. NIC4
J. NIC5
Intel® Server Board S3420GPRX Component Layout
DIMM_B2
determine the installed BIOS version. Compare this to the versions at:
http://www.intel.com/support/motherboards/server/s3420gprx
If new versions are available, update the BIOS on your server. See the User Guide on the Intel® Server
Deployment Toolkit CD for update instructions.
G
O
DIMM_B3
A. Confirm BIOS Version: Look on the Server/System Management screen in the BIOS Setup Utility to
2
1
0
B
CPU
Video
DIMM_A1
(shown with bezel removed)
Network
Intel® I/O
Expantion module
DIMM_A2
Front Panel Controls and Indicators
Network
USB 0, 1
DIMM_A3
Install Software • BIOS, Drivers, and Operating System Install
NIC3
PCI Express x16 Gen2
B
NIC1
Serial
Port A
L
A
D
SATA
Install Rail Kit
(optional)
K
ACPU
PCI-E Card
17
B
B Press the riser
Riser Card
Add-in Card
ip
Use care to avoid
pinching system
cables.
with the server board
riser socket.
CAUTION:
Observe normal ESD precautions
when installing add-in cards.
A
Install processor air
duct as shown.
Install PCIe Add-in
Card RiserAssembly
A Align the riser assembly
A
C
G
Cl
Install Processor Air Duct
D
12
C
13
D0
HD
Install PCIe Add-in Card
B
HT t
RIGracke
B
S
Blowystem
er
D1
lD
B
S
Boa erver
rd
HD
a
tic
T
LEFacket
r
B
D
Failure to do so may result in
data loss.
A
B
Insert optical device assembly into front panel opening.
Connect SATA power cable.
CAUTION It is critical that
you connect the SATA data
cables correctly from the
hard drives to your server
board.
Example: HDD0 to server
board SATA0.
11
Attach the LEFT bracket to the optical device as shown.
Attach each SATA data cable to its
matching server board SATA connector
as shown.
E 0 1
Op
Slimline
Bezel
B
C
E
Right-side SATA 1 Hard Drive
Install and Cable Optical Device (optional)
Before installing the optical device,
you must remove the slimline bezel.
Remove by rocking back and forth
to break the attach points. Once
removed, this bezel cannot be
used again.
Note that SATA cables are factory-routed
underneath the system blowers.
C
IMPORTANT NOTE!
For the hard drive 0 location, go to the
accessory box for the HDD 0 drive carrier and
install using the same procedures outlined
above. Make sure you have completed Step #6
on the front side of this document.
Insert hard drive into the carrier with
the bottom-side of the drive facing up.
Make sure connector-end of drive
goes into the carrier as shown.
D
ip
Cl
D
Sidewall Pins
E
Cable Clips
Attach a SATA power cable to each hard drive as shown.
Screw
C
A
A
B
C
E
B
10
Cabling Hard Drives
HDD 0
E
HDD 1
H
D
A
B
C
D
E
F
G
H
I
J
K
Server Board
Power Supply
System Blower Fans
Front Panel Board
Front Panel USB
HDD 0 to Server Board SATA 0
HDD 1 to Server Board SATA 1
Front Panel
System Fan Blower Power ... left fan
System Fan Blower Power ... right fan
Power to Server Board (Main)
L
M
N
O
Power to Server Board (CPU)
Optical Device SATA Data Cable
Optical Device SATA Power
PSU Management Bus to AUX
Server Board SATA
Connector Legend 5
Begin cable
connections at
2
the SATA-0
location.
4
0
3
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising