ACP-4340
ACP-4340
4U Rackmount Chassis for Full-size
SHB/SBC or ATX/MicroATX Motherboard
with 4 Hot Swap Drive Trays
Features
ƒƒ Supports a PICMG backplane with up to 14 slots or an ATX/Micro-ATX
motherboard
ƒƒ Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SAS/SATA
disk trays, one slim optical disk drive, and one 2.5" internal drive
ƒƒ Dual front USB 3.0 ports
ƒƒ Front-accessible system fan without opening top cover for easy maintenance
ƒƒ LED indicators and alarm notification for system fault detection
ƒƒ Smart fan speed control
ƒƒ Built-in Intrusion switch function
ƒƒ Built-in Intelligent System Module enabling whole system fan control and
remote manageability
Specifications
Drive Bay
Cooling
Front I/O Interface
Miscellaneous
System Monitoring
Intelligent System Module
Remote Monitoring
Environment
Physical Characteristics
External
Internal
1
1
4
1 (12 cm /74 CFM) + 1 (8 cm/56 CFM) for SAS/SATA storage unit
Yes
2
Power, HDD, temperature, fan, LAN1, and LAN2
Backplane version: One 9-pin D-Sub opening
Rear Panel
Motherboard version: Five 9-pin D-Sub and one 68-pin SCSI openings
Chassis intrusion switch
CPU/System fan speed , CPU/System temperature , motherboard voltage
(Only selected Advantech MBs/CPU cards with SUSIAccess installed can fully enable these functions, check with Advantech local rep. for detailed information.)
Operating
Non-Operating
Temperature
0 ~ 40° C (32 ~ 104° F)
-40 ~ 70° C (-40 ~ 156° F)
Humidity
10 ~ 95% @ 40° C, non-condensing
10 ~ 95% @ 60° C, non-condensing
Vibration (5 ~ 500 Hz)
1 Grms
2G
Shock
10 G (with 11 ms duration, half sine wave)
Dimensions (W x H x D)
482 x 177 x 479 mm (19" x 7.0" x 18.8")
Weight
12.5 kg (27.5 lb)
Slim Optical Drive Bay
3.5" Drive Bay
2.5" Drive Bay
Hot Swap
Fan
Air Filter
USB 3.0*
LED Indicators
* The USB ports do not operate normally if a main board with USB 2.0 internal connector only is installed.
Front View
LED indicators Slim optical drive bay
USB 3.0 x2
Switch Buttons
Inside View
Internal 2.5" drive bay
Easy-to-maintain
storage fan kit with
thumb screw
Front-accessible
fan without
opening top cover
Intelligent System
Module
Supports full-size
SHB/SBC
or ATX/MicroATX
Motherboard
Hot-swap HDD tray x4
Rear View
*Note: Backplane, SBC, motherboard, and power supply are not included.
Industrial Chassis
All product specifications are subject to change without notice
Last updated : 6-Apr-2016
ACP-4340
Dimensions
Unit: mm [inch]
426 [16.772]
426 [16.772]
465 [18.307]
482 [18.976]
177 [6.969]
101.60 [4.000]
MB version
BP version
92
92
92
98
[3.622] [3.622] [3.622] [3.858]
478.60 [18.843]
492.30 [19.382]
Ordering Information
Part Number
Power Supply
Backplane Version
ACP-4340BP-00XE
ACP-4340BP-40XE
96PS-A400WPS2
Mother board Version
ACP-4340MB-00XE
ACP-4340MB-40ZE
96PS-A400WPS2
Optional Accessories
Wattage
Switch type
400W
ATX
ATX
400W
ATX
ATX
Power Supply Options
Part Number
80 Plus
Grade
Watts
Type
PS8-400ATX-ZE
Bronze
400W
Single
PS8-500ATX-ZE
Bronze
500W
Single
PS8-700ATX-ZE
Bronze
700W
Single
RPS8-500ATX-XE
Bronze
500W
1+1
Redundant
Part Number
96CB-SATAPOWER-6P1
98R1434000E
Description
SATA power wire 6-pin to big 4-pin (for slim ODD)
ACP-4340 fan kit for multi GPU card
Spare Parts
Part Number
9662132020E
1990021256T000
Description
Black mobile HDD tray
Door filter
Input
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
Online Download www.advantech.com/products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising