5952-1430E
Keysight Technologies
LCR Meters, Impedance Analyzers
and Test Fixtures
Material, Semiconductor, Component and In-Circuit Measurement Solutions
Selection Guide
02 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Achieve Success with The Industry Standard for
Impedance Measurements
Hewlett Packard, Agilent Technologies, and Keysight
Technologies, Inc. have contributed innovations and
product excellence in impedance analysis for over half a century. Whether your application is in R&D, production, quality
assurance, or incoming inspection, we take pride in contributing
to your success. We strive to deliver complete solutions to meet
your needs, from impedance analyzers to a wide variety of test
accessories. Achieve success with Keysight’s impedance measurement solutions. Keysight offers:
Superior product performance: Keysight products
provide the best in class accuracy and the repeatability with the
fast measurement speed. Three types of impedance measurement solutions as shown in Table 1 are available meeting the
various measurement needs.
Complete solution: Covering frequencies from 5 Hz
design and manufacturing of each Keysight LCR meter and impedance analyzer. Keysight also has a list of technical publication
to assist you in many different applications (see page 15 for full
listing.)
Advanced measurement techniques for a wide
range of applications
Figure 1 is a comparison of different measurement
techniques used in Keysight’s LCR meters and impedance analyzers. As you can see, each technique has special
measurement advantages:
–– Auto-balancing bridge offers widest impedance measurement range with typical frequency range of 20 Hz
to 120 MHz. This technique is best for low-frequency,
general-purpose testing.
to 3 GHz along with the wide variety of test accessories, Keysight’s impedance product line offers you the widest selection
of equipment for your application. This selection guide gives an
overview of all the products and accessories you can choose
from.
Keysight products provide the best performance in the industry
with frequency options to meet your needs at an affordable
price. You can select the most appropriate
frequency range for your application. Flexible frequency
upgrade options are also available. You can choose just what
you require today with the least amount of investment and
upgrade later as needs arise.
Technical expertise: Keysight has decades of experience
providing impedance measurement solutions. Years of experience and continuing technical innovations go into the
100M
Impedance measurement range (ohms)
Appropriate frequency range for your application:
Keysight's impedance analyzers/LCR meters measuremant
technique comparison 10% accuracy range
10M
Auto-balancing
bridge
1M
I-V
100K
10K
RF I-V
1K
100
10
1
100m
10m
1m
1
10
100
1K
10K
100K
1M
10M 100M
1G
10G
Measurement frequency range (Hz)
Figure 1. Impedance measurement techniques of impedance analyzers/
LCR meters
Table 1. Impedance measurement product type
Product Type
Product Highlights
LCR Meter
Impedance Analyzer
Network Analyzer
Frequency Sweep
Capability
Spot/List
Continuous
(Start/Stop, Center/Span)
Continuous
(Start/Stop, Center/Span)
Display
Numeric Only
Graphics
Graphics
Others
Handler interface,
comparator
Equivalent circuit
analysis built in, material
measurements, in-circuit
measurements
Equivalent circuit analysis
built in, multiple function in
one instrument
Advantages
Low-cost solution,
ease of use, high
speed
Widest measurement range,
resonant analysis, circuit
modeling
Cost-effective, versatile
03 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
–– I-V technique covers from 20 Hz to 120 MHz with a more focused impedance measurement range. I-V technique also allows probing for in-circuit testing.
–– RF I-V, an enhancement of the I-V technique, offers some
of the high-frequency benefit of network analysis while
retaining some of the impedance measurement range of
the I-V technique. Designed for accuracy and high-frequency performance, the RF I-V technique is excellent for RF
component analysis, especially for small inductance and
capacitance values.
–– In addition, Keysight’s network analyzer offers an impedance
measurement solution using the combination of three measurement techniques (reflection, series-thru, and shunt-thru)
based on the S-parameter and
gain-phase measurements.
How to use this selection guide
Table 2 is a summary of all of Keysight’s impedance products. It
is designed to assist you in better comparing Keysight’s wide range
of instrumentation and in choosing possible solutions for your
applications, depending on your requirements in the following
areas:
–– Test frequency range
–– Device type or application type
–– Accuracy requirement (measurement technique)
–– Any other special needs
If you find several possible solutions for your application, go to the
corresponding pages to find more details about each product.
Table 2. Keysight impedance measurement products
Product
Type
Freq. Positioning
range
Impedance RF
analyzer
LF/HF
LCR meter
RF
LF
Application LF
specific
Model
Frequency Basic Z
range (Hz) accuracy1
(%)
1 M to 3 G
0.65 (0.45
typical)
Measurement Feature 4 Measurement
display range
technique 5
(Ω)
120 m to 52 k 3 A,B
RF-IV
Main application
5 to 3 G
2 (typical)
1 to 2 k/5 to
20 k/1 m to 5 3
(typical)
A,B
Ref/Series/Shunt
LCR component, PDN
High peformance/ E4990A
material/C-V
20 to 120 M
25 m to 40 M 3
A,B
ABB
LCR component, material,
semiconductor
In-circuit
(grounded), C-V
20 to 120 M
0.08
(0.045
typical)
1
50 m to 4 M 3
A,B
IV
In-circuit, semiconductor
1M to 3G
0.8 (0.45
typical)
140 m to 4.8 k 3
C
RF I-V
LCR component
20 to 2 M
0.05
4 m to 100 M 3
D
ABB
10 fF to 2 mF 3
D
ABB
LCR component, material,
semiconductor
MLCC
High peformance/ E4991B
material/high
temperature
Multi function
E5061B
Option
3L3/3L4/
3L5 w/005
E4990A
with
42941A
High performance/ E4982A
high speed
measurement
High performance/ E4980A/AL
material/C-V
For capacitor/
E4981A2
high speed
measurement
1. Basic Z accuracies are best-case values
and vary depending on measurement
conditions. See product data sheet for
detail.
2. Capacitance measurement only.
3. Z range shows the 10% accuracy range.
120, 1 k and 0.07 (0.042
1M only
typical)
4. Feature code:
A: Built-in equivalent circuit analysis
B: Frequency sweep with color LCD display
C: Spot frequency with color LCD display
D: Spot frequency with LCD display
LCR component, material,
semiconductor
5. Measurement technique code:
ABB:
Auto-balancing bridge
I-V: I-V methodC: Spot frequency with
color LCD display
D:
Spot frequency with LCD display
RF I-V: RF I-V method
Ref:
Reflection method
Series: Series-thru method
Shunt: Shunt-thru method
04 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Impedance Analyzers
Only Keysight impedance analyzers provide unparalleled accuracy from mOhm to Mohm, from 5 Hz to 3 GHz. You can select
the appropriate frequency range for your application.
–– Frequency, DC bias, and AC voltage/current sweep capability lets you customize where and how test data will be taken.
–– Built-in equivalent-circuit analysis computes a multielement circuit model of the device under test.
–– Advanced calibration and compensation methods reduce
measurement errors.
–– Accessories for permittivity & permeability of materials,
high-temperature characterization, various passive components, and impedance probe for grounded measurements
available
E4991B impedance analyzer
–– Three frequency options: 1 MHz to 500 M/1 G/3 GHz,
upgradable
–– ±0.65% (typical ±0.45%) basic accuracy and 120 mΩ to 52
kΩ impedance range (10% measurement accuracy range)
–– Measurement parameters: |Z|, |Y|, q, R, X, G, B, L, C, D, Q,
|G|, Gx, Gy, qG, Vac, Iac, Vdc 1, Idc 1
–– Built-in DC bias (Option 001): 0 V to ±40 V, 0 A to
±100 mA
–– 4-chnannel & 4-trace on 10.4 inch color LCD with touch
screen
–– Data analysis function: Equivalent circuit analysis, limit line
test
–– Dielectric/magnetic material measurement (Option 002):
|[r|, [r', [r'', tand([), |μr|, μr', μr'', tand(μ)
–– Temperature characteristics measurement (Option 007) and
reliable on -wafer measurement (Option 010) capabilities
1. Option 001 is required.
E4990A impedance analyzer
–– Five frequency options; 20 Hz to 10/20/30/50/120 MHz, upgradable
–– ±0.08% (typical ±0.045%) basic impedance
measurement accuracy
–– 25 mΩ to 40 MΩ wide impedance measurement range
(10% measurement accuracy range)
–– Measurement parameters: |Z|, |Y|, q, R, X, G, B, L, C, D, Q,
Complex Z, Complex Y, Vac, Iac, Vdc, Idc
–– Built-in DC bias range: 0 V to ±40 V, 0 A to ±100 mA
–– 4-chnannel & 4-trace on 10.4 inch color LCD with touch
screen
–– Data analysis function: Equivalent circuit analysis, limit line
test
–– In-circuit or grounded measurement with the 42941A
impedance probe (Option 120 only)
–– 7-mm test fixtures combined with 42942A Terminal Adapter
(Option 120 only)
–– Measurement speed: 3 ms~ / point (Option 120, and
010/020/030/050 with option 001)
05 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Network Analyzer
E5061B-3L3/3L4/3L5 LF-RF network analyzer
The E5061B-3L3/3L4/3L5 LF-RF network analyzer with the
option 005 impedance analysis function offers the network and
impedance analysis capabilities in a single instrument. The
E5061B-3L3/3L4/3L5 with option 005 is a versatile and cost-effective solution suitable for general R&D use where various kinds
of electronic components and circuits need to be evaluated:
–– Three frequency options; 5 Hz to 500 M/1.5 G/3 GHz,
upgradable
–– S-parameter test port (5 Hz to 3 GHz) and gain-phase test
port (5 Hz to 30 MHz, 1 M Ω/50 Ω inputs)
–– The E5061B-005 supports reflection, series-thru, and
shunt-thru methods using the S-parameter test port or
gain-phase test port. These methods are suitable for lowto-middle, middle-to-high, and very low milliohm impedance ranges, respectively. 1
–– Keysight’s 7 mm type and 4-terminal pair type
component test fixtures can be used in the reflection method (at the S-parameter test port) and the
series-thru method (at the gain-phase test port).
–– Impedance measurement parameters:
|Z|, |Y|, q, R, X, G, B, C, L, D, Q
–– Built-in DC voltage bias source (0 to ±40 V,
max ±100 mA)
1. For details about each method’s impedance measurement range, refer to “E5061B-3L3/3L4/3L5 LF-RF Network Analyzer with Option 005
2. Impedance Analysis Function, Data Sheet” (5990-7033EN).
06 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
LCR Meters
The Keysight LCR meters provide the best combination of
accuracy, speed, and versatility at an affordable price for both
R&D and production applications.
–– Wide frequency range from 20 Hz to 3 GHz
–– Frequency list sweep for continuous testing at multiple
frequency points
–– Unparalleled measurement accuracy at both high and low
impedance range
–– With the widest variety of accessories, great for testing of
leaded components, surface-mount components, semiconductors, and materials
–– Fast measurement speed with superior measurement
repeatability
–– Handler interface with BIN sorting function for easy test
automation in production environment
E4982A LCR meter
–– 1 MHz to 300 M/500 M/1 G/3 GHz with 100 kHz resolution
–– High speed measurement: selectable from 0.9 ms
(Mode 1), 2.1 ms (Mode 2), and 3.7 ms (Mode 3)
–– 0.8% (typical ±0.45%) basic accuracy
–– RF I-V technique provides a wide impedance range
(0.14 Ω to 4.8 kΩ, 10% measurement accuracy)
–– Highly stable measurement of low-inductance and
excellent Q accuracy for meeting chip inductor test
requirements
–– Handler interface suitable for production testing
–– Measurement parameter |Z|, |Y|, θ, R, X, G, B, L, C, D,
Q, Rdc, Idc, Vdc, in user-definable combinations of
parameters (up to 4 parameters)
–– Versatile PC connectivity – GPIB, LAN, USB
E4980A precision LCR meter
–– 20 Hz to 2 MHz with 4-digit resolution
–– 0.05% basic accuracy with superior measurement
repeatability at low and high impedance
–– Measurement time (at 1MHz): 5.6 ms (SHORT), 88 ms (MED), 220 ms(LONG)
–– Option E4980A-001 adds ±20 Vrms/±100 mArms test signal,
±40 V/±100 mA internal dc bias, 2nd DC source, and Vdc/Idc
measuremnet
–– Option 201 and 301 add handler interface and scanner
interface respectively
–– Measurement parameters:
|Z|, |Y|, θ, R, X, G, B, L, C, D, Q, Rdc, Vdc 1, Idc 1
–– Versatile PC connectivity, LAN, USB (memory/USBTMC), GPIB
E4980AL precision LCR meter
–– 20 Hz to 300 kHz/500 kHz/1 MHz with 4-digit resolution
–– 0.05% basic accuracy with superior measurement
repeatability at low and high impedance
–– Measurement time (at 1MHz): 12 ms (SHORT), 118 ms (MED), 343 ms(LONG)
–– Measurement parameters:
|Z|, |Y|, θ, R, X, G, B, L, C, D, Q, Rdc
–– Versatile PC connectivity, LAN, USB (memory/USBTMC), GPIB
E4981A 120 Hz/1 kHz/1 MHz capacitance meter
–– 120 Hz, 1 kHz and 1 MHz test frequencies
–– High speed measurement: 2.3 ms (1 MHz), 3.0 ms (1 kHz), 11.0 ms (120 Hz)
–– Basic accuracy C: 0.07%, (typical ±0.042%) D: 0.0005 (typical
±0.0003)
–– Handler and scanner interfaces suitable for production testing
–– Measurement parameters: C, D, Q, ESR, G
–– SLC feature provides constant test voltage for high-value
capacitor measurements.
1. Option E4980A-001 is required.
07 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Test Fixtures and Accessories (Four-Terminal-Pair)
Basic test fixtures
16034E SMD/chip test fixture
16034G small SMD/chip test fixture
16034H SMD/chip test fixture
Frequency: ≤ 40 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Frequency: ≤ 120 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Frequency: ≤ 120 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Suitable for array-type devices
16334A SMD/chip tweezers test
fixture
16047A axial & radial test fixture
16047E test fixture
Frequency: ≤ 13 MHz (Kelvin contact)
Maximum Voltage: ±42 V peak max.
(AC+DC)
Frequency: ≤ 120 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Frequency: ≤ 15 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
16089A/B/C clip leads
Clip type: A/B/C: Kelvin
Frequency: 5 Hz to 100 kHz
Cable length: A/B/C: 0.94 m
Maximum Voltage: ±42 V peak max.
(AC+DC)
08 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Test Fixtures and Accessories (Four-Terminal-Pair)
Terminal adapters
External DC bias fixtures
16065A axial and radial test fixture with
safety cover
Frequency: 50 Hz to 2 MHz
Maximum external dc bias: ±200 V
Blocking capacitor of 5.6 µF is connected
in series with the Hc terminal
16065C external bias adapter
42942A four-terminal-pair to 7 mm
terminal adapter
Frequency: 100 Hz to 1 MHz
Maximum external dc bias: ±40 V
Blocking capacitor of 100 µF is connected
in series with the Hc terminal
Frequency: ≤ 120 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Use with only E4990A-120
Test leads
16048A/D/E BNC test leads
16048G/H BNC test leads
Frequency: A: ≤ 30 MHz, D: ≤ 30 MHz,
E: ≤ 2 MHz
Cable length: A: 0.94 m, D: 1.89 m,
E: 3.8 m
Maximum Voltage: ±42 V peak max.
(AC+DC)
Frequency: ≤ 120 MHz
Cable length: G: 1 m, H: 2 m
Maximum Voltage: ±42 V peak max.
(AC+DC)
Use with only E4990A
09 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Test Fixtures and Accessories (Four-Terminal-Pair)
Material measurements
Others
16451B dielectric test fixture
16452A liquid test fixture
Measurement parameters:
capacitance (C), dissipation factor (D),
and dielectric constant (εr', εr'')
Material-under-test size:
thickness: ≤ 10 mm
diameter: 10 to 56 mm
Frequency: ≤ 30 MHz
Measurement parameter:
capacitance (C), dielectric constant
(εr', εr'') Liquid sample
Quantity: ≤ 6.8 ml
Frequency: 20 Hz to 30 MHz
42941A impedance probe kit
Frequency: ≤ 120 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Probe cable length: 1.5 m
Use with only E4990A-120
Test Fixtures and Accessories (7-mm Terminal)
RF SMD/chip components
16196A/B/C/D SMD test fixture
Coaxial fixture for parallel
electrode SMDs.
Frequency: dc to 3 GHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Applicable SMD size:
16196A: 1.6 mm x 0.8 mm
16196B: 1.0 mm x 0.5 mm
16196C: 0.6 mm x 0.3 mm
16196D: 0.4 mm x 0.2 mm
16197A bottom-electrode SMD
test fixture
Frequency: dc to 3 GHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
Applicable SMD size: from 1005 (mm)/
0402 (inch) to 3225 (mm)/1210 (inch).
Accommodation of the 0603
(mm)/0201 (inch) size is available with
Option 001.
16092A axial, radial, and SMD test fixture
Frequency: ≤ 500 MHz
Maximum Voltage: ±42 V peak max.
(AC+DC)
16198A bottom-electrode SMD test fixture
Frequency: dc to 3 GHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Applicable SMD size: 0201 (mm)/008004
(inch) and 0402 (mm)/01005 (inch).
10 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
16192A parallel-electrode SMD
test fixture
16194A high temperature component test
fixture
Frequency: dc to 2 GHz
Maximum Voltage: ±42 V peak max
(AC+DC)
Frequency: dc to 2 GHz
Maximum Voltage: ±42 V peak max
(AC+DC)
Operating temperature: -55 °C to +200 °C
Material measurements
16453A dielectric test fixture
16454A magnetic test fixtures
Frequency: 1 MHz to 1 GHz
Sample size (smooth sheets only):
thickness: 0.3 mm to 3 mm
diameter: ≥ 15 mm
Frequency: 1 kHz to 1 GHz
Sample size (toroids only):
height: ≤ 8.5 mm
inner diameter: ≥ 3.1 mm
outer diameter: ≤ 20 mm
Test Fixtures and Accessories (E5061B)
16201A N-type to 7 mm terminal
adapter
Frequency: ≤ 3 GHz
Maximum Voltage: ±42 V peak max
(AC+DC)
Use with only E5061B
16200B external DC bias adapter
Frequency: 1 MHz to 1 GHz
Maximum external dc bias: Up to 5 A,
±40 V
11 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Simplify and Improve Your Measurements
with Keysight's Test Accessories
You will improve your measurement results with the proper
test fixture.
16034E
SMD/chip test fixture
DC-40 MHz
• • 16034G
SMD/chip test fixture, small DC-120 MHz
• • 16034H
SMD/chip test fixture, for Array-typeDC-120 MHz
• • 16047A
Axial and radial test fixture
DC-13 MHz
• • 16047E
Axial and radial test fixture
DC-120 MHz
• • 16048A
One meter test leads, BNC
DC-30 MHz
• •
16048D
Two meter test leads, BNC
DC-30 MHz
• •
16048E
Four meter test leads, BNC
DC-2 MHz
•
16048G
One meter test leads, BNC
DC-120 MHz
16048H
Two meter test leads, BNC
DC-120 MHz
16065A
Ext. voltage bias with safety cover (≤ 200 Vdc)
50 Hz-2 MHz
• • 16065C
External bias adapter (≤ 40 Vdc)
100 Hz-1 MHz •5 •
16089A/B/C
Kelvin clip leads
5 Hz-100 kHz
• • 16092A
RF spring clip: axial, radial and SMD
DC-500 MHz
•1
16192A
Parallel electrode SMD test fixture
DC-2 GHz
•1
16194A
High temperature component test fixture
DC-2 GHz
•1
16196A/B/C/D
Parallel electrode SMD test fixture
DC-3 GHz
•1
16197A
Bottom electrode SMD test fixture
DC-3 GHz
•1
16198A
Bottom electrode SMD test fixture
DC - 3 GHz
•1
16200B
External DC bias adapter
1 MHz-1 GHz •1
16201A
N-type to 7 mm terminal adapter
5 Hz to 3 GHz
16334ASMD/chip tweezers test fixture
DC-15 MHz
• • 16451B
Dielectric material test fixture
DC-30 MHz
• • 16452A
Liquid test fixture
20 Hz-30 MHz
• 16453A
Dielectric material test fixture
1 MHz-1 GHz
16454A
Magnetic material test fixture
1 kHz-1 GHz
42941A
Impedance probe kit
DC-120 MHz
42942A
Four-terminal pair to 7-mm adapter
DC-120 MHz
Note: Refer to the accessory descriptions for frequency and operational limits.
1. 3.5-mm (M) to 7-mm adapter is required
2. 42942A is required.
3. Compatible when used in conjunction with 16201A.
4. E4991B-002 is required
5. E4980AL only
E5061B Option 3L3/3L4/3L5 w/005
E4991B
E4982A
E4981A
Table 3. Test accessories/fixtures
E4980A/AL
For additional product information and literature, visit our
Accessories Web site: www.keysight.com/find/impedance-accessory
E4990A Option 010/020/030/050
–– more reliable and repeatable measurement
–– higher through-put
–– fewer handling errors
–– tighter test limits
–– better measurement accuracy
E4990A Option 120
Selecting a test fixture is as important as selecting the right
instrument. Keysight offers a wide range of accessories for
axial, radial, and SMD/Chip devices. In addition, a variety of
test leads are available to simplify remote testing and systems
applications. External test fixtures with safety covers are
also available.
•
•
•
•
•
• •
• •
• •
•
• •
•
•
•
•
•
•
•
•2
•2
•2
•2
•2
•
• •3
• •3
• •3
• •3
• •3
• •3
• •3
•
•2 • •
• •
• •
•4
2
• •4
•
•
12 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Helping You Make Better Measurements
Keysight's application knowledge can help you make better
measurements.
Impedance Measurement Handbook (P/N 5950-3000) is
a comprehensive guide to impedance measurements. The
handbook covers from basics to applications and you can
learn valuable measurement techniques to support your test
challenges.
1. Impedance Measurement Basics
2. Impedance Measurement Instruments
3. Fixturing and Cabling
4. Measurement Error and Compensation
5. Impedance Measurement Applications and Enhancements
Complementary Products and Accessories
To help you find a complete solution, we have listed the following companies that
make complementary products or specialized accessories for Keysight's impedance measurement products. Please contact each company directly if you are
interested in its products. (Keysight does not make any special endorsement of
these companies’ products; this list is for reference only.)
Company name
Product specialty/expertise
Web site address
All-Ring Tech (ART)
Component testing, sorting and taping machine
www.allring-tech.com.tw
ArumoTech
Custom test fixtures
www.arumotech.co.jp
Axisnet
Impedance measurement system under high power condition
www.axisnetinc.com
Beta LaserMike
Automated LAN cable test system
www.betalasermike.com
BH Electronics
Wideband transformers
www.bhelectronics.com
Cascade Microtech
RF and microwave probers and accessories for semiconductor and
IC applications.
www.cascademicrotech.com
Electro Scientific Industries (ESI)
Component testing, sorting and taping machine
www.esi.com
ESPEC
Temperature chamber for component and material testing.
www.espec.com
HCUNI
Material measurement solutions
www.hcuni.com
Humo Laboratory
Capacitor and crystal device testing and sorting machine
www.humo.co.jp
Inter-Continental Microwave (ICM)
Automated device handling systems, RF and microwave test
fixtures and non-coaxial calibration standards.
www.icmicrowave.com
Kanto Electronic Application and
Development (KEAD)
Materials measurement solutions
www.kead.co.jp
KEYCOM
Materials measurement solutions
www.keycom.co.jp
Material-Wave Interactions (MWI)
Laboratories
Material measurement solutions
www.mwilab.com
North Hills Signal Processing
Wide-band transformers (baluns) for balanced measurement.
www.northhills-sp.com
Seiwa Giken
Energy and battery test solution
www.seiwa-giken.co.jp
Systemhouse Sunrise
C-V test solution for solar cells
www.ssunrise.co.jp
SUMTEC
Materials measurement solutions
www.sumtec.biz
Sine Yo Feng (SYF)
Component testing and taping machine
www.syfpt.com.tw
TOKYO WELD
Component testing, sorting and taping machine
www.tokyoweld.com
13 | Keysight | LCR Meters, Impedance Analyzers and Test Fixtures - Selection Guide
Evolving
Our unique combination of hardware, software, support, and people can help
you reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Keysight Infoline
www.keysight.com/find/Infoline
Keysight’s insight to best in class information management. Free access to
your Keysight equipment company reports and e-library.
KEYSIGHT
SERVICES
Keysight Services
www.keysight.com/find/service
Our deep offering in design, test, and measurement services deploys an
industry-leading array of people, processes, and tools. The result? We help
you implement new technologies and engineer improved processes that
lower costs.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
For other unlisted countries:
www.keysight.com/find/contactus
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
DEKRA Certified
www.keysight.com/find/impedance
www.keysight.com/find/impedance-accessory
www.keysight.com/find/mta
(BP-08-24-16)
ISO9001 Quality Management System
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2013 - 2014, 2016
Published in USA, November 15, 2016
5952-1430E
www.keysight.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising