HDMI Quad Screen Splitter/Multiviewer with Built

HDMI Quad Screen Splitter/Multiviewer with Built
HDMI Quad Screen Splitter/Multiviewer with
Built-In USB KVM Switch
SPLITMUX®
Display video from four HDMI/DVI computers simultaneously on a single monitor. Switch to and
control any of the four computers while monitoring the other three connections in real time.
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
„„
Quad, Picture in Picture, Full Screen, and Custom display modes.
Custom Display Mode: the size, position and selection of any or all
windows are customizable.
2- and 3-source viewing is possible with this method.
Maintain input aspect ratio if desired-no stretching necessary.
ŠŠ Layer display windows and adjust transparency of each video
source display.
Switch one of the four attached computers to a shared USB keyboard
and mouse for operation.
Supports 2K resolution 2048x1080, HDTV resolutions to 1080p, and
computer resolutions to 1920x1200.
•• Independent video in to video out resolution.
HDMI features supported:
•• Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
•• Outputs: 24- and 30-bit sRGB.
•• Four-channel non-mixing or one channel mixing stereo with 16-,
20-, or 24-bit uncompressed PCM audio.
•• Bandwidth up to 165 MHz
ŠŠ Inputs: 2.25 Gbps
ŠŠ Output: 2.0625 Gbps
HDCP compliant.
Fluid, real-time video performance with up to 60 frames per second
(fps) in all four quadrants.
Zoom, pan, and crop the image from any source to focus on key areas.
Switch audio independently of video from connected HDMI sources.
•• Multiple audio sources can be simultaneously active in any display
mode or preset layout.
•• Adjustable audio gain with VU level indicators for each input
channel.
A customized text label can be added for each video window to provide
easy input identification (UMD).
Control the multiviewer through Ethernet, RS232 serial port, keyboard
commands, on screen display (OSD), front panel buttons, or IR remote.
Built-in 2-port USB hub - switch devices between connected
computers.
•• In Full Screen mode, USB touch screen monitors can be used to
control the connected active computer.
Compliant with USB 2.0 (high-speed and low/full speed) standards.
Cascade multiviewers to display video from any number of video
sources on one screen.
•• Each video source in the cascade can be controlled directly from
the Web Server graphical user interface under Custom Mode
Settings.
Backup and restore multiviewer configurations.
Supported output resolutions can be selected or set to auto detect
optimal resolution from the monitor’s EDID.
Available options: desktop unit, 1RU rackmount unit, dual side-by-side
rackmount units in 1RU
•• Rackmount units can be mounted so that the front panel buttons are
facing the front or back of the rack.
•• Rackmount units include cable management shelf.
R
1
NETWORK
TECHNOLOGIES
INCORPORATED
1.800.RGB.TECH (800.742.8324)
To l l F r e e : U S & C a n a d a
SPLITMUX-USBHD-4RT (Front & Back)
• HDMI & DVI
• Built-In USB KVM Switch and 2-port USB Hub.
• Supports 2K, 1080p & 1920x1200 input/output
resolutions.
• Quad, Picture in Picture, Full Screen, and Custom
Display Modes
• The size, position & selection of any or all windows are
customizable.
• Zoom, Pan & Crop
The SPLITMUX® HDMI Quad Screen Multiviewer with Built-in USB
KVM Switch allows you to simultaneously display video from four different
computers on a single monitor. Additionally, it can switch one of the four
attached computers to a shared keyboard and mouse for operation and to
two additional USB devices. It is capable of displaying the video sources
in quad, PiP, full, or custom mode. In custom display mode, each of the
quadrants can be adjusted to any size and positioned to any location on the
display.
Configuration and Cable Illustration
1
USB HDMI PC
3
2
Blu-ray Player
USB Single Link
DVI PC
4
USB HDMI MAC
AC
Adapter
SPLITMUX-USBHD-4RT
HDTV
1
2
3
4
USB Peripheral
Devices
= HD-xx-MM
= DVI-HD-xx-MM
= Male USB Type A
to Male USB Type B
330.562.7070
International calls
© 2016, 2017 NTI. All rights reserved.
330.562.1999
Worldwide fax
sales@ntigo.com
www.networktechinc.com
HDMI Quad Screen Splitter/Multiviewer with
Built-In USB KVMSPLITMUX
Switch
®
SPLITMUX®
Display video from four HDMI/DVI computers simultaneously on a single monitor. Switch to and
control any of the four computers while monitoring the other three connections in real time.
Specifications
Hosts
„„
„„
„„
„„
„„
„„
„„
Protocols
Four female HDMI connectors.
Four female USB Type B connectors.
Supports USB computers.
•• Boots PCs, SUNs, and MACs simultaneously.
Supported video input resolutions:
•• 2K Cinema (2048x1080 @ 60Hz)
•• HDTV resolutions to 1080p
•• Computer resolutions to 1920x1200.
Supports HDMI devices, such as DVD/Blu-ray players, satellite
receivers and HDTV tuners.
Multiplatform support: Windows 2000/XP/Vista/7/8/10, Windows
Server 2000/2003/2008/2012, Solaris, Linux, FreeBSD, and MAC OS
9/10.
A DVI source can be connected by using the DVI-HD-xx-MM cable
(not included). The cable does not pass audio to the multiviewer.
•• Use a video + audio to HDMI video converter to pass embedded
HDMI audio into the multiviewer (see Compatible NTI Products
below).
„„
„„
„„
Power
„„
„„
„„
„„
„„
„„
One female HDMI connector.
Supported video output resolutions:
•• 2K Cinema (2048x1080 @ 60Hz)
•• HDTV resolutions to 1080p
•• Computer resolutions to 1920x1200
HDMI-embedded audio switching (four-channel stereo, non-mixing or
one channel stereo, mixing).
•• Switch audio independently of video from connected HDMI
sources.
•• Multiple audio sources can be simultaneously active in any display
mode or preset layout.
A DVI display can be connected by using the DVI-HD-xx-MM cable
(not included). The cable does not pass audio to the display.
•• Use a video + audio to HDMI video converter to pass embedded
HDMI audio into the multiviewer (see Compatible NTI Products
below).
Latency:
•• 50mS at 60Hz
•• 60mS at 50Hz
•• 100mS at 30Hz
•• 120mS at 25Hz
•• 125mS at 24Hz
Devices
„„
„„
„„
Two female USB Type A connectors for keyboard and mouse.
•• Keyboard and mouse are hot-pluggable.
Two female USB Type A connectors for USB peripheral devices
(printers, scanners, security cameras, flash drives, etc.)
•• Connect any type of USB device - fully transparent USB
connectors.
•• Switch USB 2.0 devices between connected computers.
•• In Full Screen mode, USB touch screen monitors can be used to
control the connected active computer.
Provides support for high-speed (480 Mbps), full-speed (12 Mbps), or
low-speed (1.5 Mbps) USB devices.
R
NETWORK
TECHNOLOGIES
INCORPORATED
1.800.RGB.TECH (800.742.8324)
To l l F r e e : U S & C a n a d a
110 to 220 VAC at 50 or 60Hz via country-specific AC adapter.
Power consumption: 20W
Dimensions
„„
„„
Monitor
„„
HTTP, HTTPS
TCP/IP, DHCP, UDP, ARP
IPV4
SPLITMUX-USBHD-4RT (desktop)
•• WxDxH (in): 7.35x4.98x1.75 (187x126x45 mm)
SPLITMUX-USBHD-4RT-R (1RU rackmount) and SPLITMUXUSBHD-4RT-2R (1RU dual side-by-side rackmount)
•• WxDxH (in):
ŠŠ Without rackmount kit: 7.35x4.98x1.75 (187x126x45 mm)
ŠŠ With rackmount kit: 19x4.98x1.75 (483x126x45 mm) (excludes
cable tray)
•• Can be mounted so that the front panel buttons are facing the front
or back of the rack.
•• Includes cable management tray.
ŠŠ Adds 3.37” to the depth.
Environmental
„„
„„
„„
Operating temperature: 32°F to 122°F (0°C to 50°C).
Storage temperature: -22°F to 140°F (-30°C to 60°C).
Operating and storage relative humidity: 17 to 90% non-condensing
RH.
Regulatory Approval
„„
„„
CE, RoHS
TAA compliant
Warranty
„„
Two years
Package Includes
„„
„„
„„
„„
„„
„„
Multiviewer
One power adapter
One DB9 female to RJ45 female adapter
One 5ft CAT5e super flat cable
One IR remote control
Manual
Compatible NTI Products
„„
Combine NTI’s video converters and splitters for multiple video
sources and display signals
•• DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM).
ŠŠ The cable does not pass audio to the multiviewer.
•• DVI + Stereo Audio to HDMI Converter (DVIA-HD-CNVTR-LC)
•• DVI + Digital Audio to HDMI Converter (DVI-HD-CNVTR)
•• Composite Video + Audio to HDMI Converter (CVA-HD-LC)
•• VGA + Audio to HDMI Converter Cable (VGAA-HD-ULC)
•• VGA/Component Video/HDMI Scaler/Converter
(PCHD-HDMI-SCALER)
330.562.7070
International calls
© 2016, 2017 NTI. All rights reserved.
330.562.1999
Worldwide fax
sales@ntigo.com
www.networktechinc.com
2
HDMI Quad Screen Splitter/Multiviewer with
Built-In USB KVM Switch
SPLITMUX®
Display video from four HDMI/DVI computers simultaneously on a single monitor. Switch to and
control any of the four computers while monitoring the other three connections in real time.
Display Modes
Quad Mode
„„
„„
„„
Full Screen Mode
In quad mode, the screen is split into four fields of equal size each
displaying the entire contents of the corresponding input.
•• Fluid, real-time video performance with up to 60 frames per second
(fps) in all four quadrants.
Borders can be set for each image input.
Aspect ratio can be maintained for all outputs.
Picture in Picture (PIP) Mode
„„
„„
„„
„„
„„
In PIP mode, the full screen display of one of the four video sources
is accompanied by one, two, or three small images (thumbnails) of
the three other video sources on the right hand margin of the screen,
allowing simultaneous monitoring.
Size, position and selection of the thumbnails are customizable.
Scan feature: cycle through two or four different sources at set intervals
for the larger image.
Borders can be set for each image input.
Aspect ratio can be maintained for all outputs.
„„
„„
„„
In full screen mode, one of the four video sources is displayed in full
screen size and maximum resolution.
Scan feature: cycle through four different sources at set intervals.
USB touch screen monitors can be used to control the connected active
computer.
Custom Mode
„„
„„
„„
„„
„„
„„
„„
„„
In Custom mode, each video source is displayed in its own separate,
detached window.
Size, position and selection of the windows are customizable.
Use web server graphical user interface to configure settings for each
window.
Zoom, pan, and crop the image from any source to focus on key areas.
Presets of the window positioning can be saved.
Borders can be set for each image input.
Display optional Left/Right VU level indicators for each corresponding
display window.
Configure up to 10 preset layouts that can be switched live at any time.
Control Methods
Front Panel Interface
„„
On Screen Display (OSD)
Use front panel buttons to locally change ports or to select a display
mode.
Ethernet Control
„„
„„
„„
„„
„„
NETWORK
TECHNOLOGIES
INCORPORATED
„„
„„
Configuration can be done over the Internet/LAN via Web page or
Telnet.
Supports Internet Explorer 6.0 or higher, Firefox 2.0 or higher, Opera
9.0, Google Chrome, Safari 4.0 or higher for MAC and PC.
Configure and control the settings for the system, network, input,
output, and modes.
Female RJ45 connector.
10/100 BaseT Ethernet interface.
•• Web Server
• Security is ensured by password and user configurable
timeout.
• Up to 16 users can access the web page at one time.
• The user with administrative privileges can access the
following pages:
ŠŠ System page: allows configuration of unit, serial port, and
OSD settings.
ŠŠ Network pages: configure IP and server settings.
ŠŠ Inputs page: allows configuration of the four video inputs.
ŠŠ Output page: configure the video and audio output
parameters.
ŠŠ Modes page: allows selection and configuration of the
output display mode.
ŠŠ User Config page: add, configure, and view all users.
ŠŠ Firmware page: update firmware for the SPLITMUX.
ŠŠ Telnet
• Security is ensured by password.
• Menu commands are similar to RS232 commands.
• The telnet server listens on port 2000.
• Port 2000 is for an operator telnet session.
R
3
„„
1.800.RGB.TECH (800.742.8324)
To l l F r e e : U S & C a n a d a
„„
Select display modes and computers with On Screen Display (OSD).
Use the front panel buttons or keyboard commands to operate the OSD.
OSD controls for configuration and control of the system, network,
input, output, and display modes.
Access to OSD Mode can be limited by an administrator-assigned PIN
number.
RS232
„„
„„
„„
Configuration and control can be done through the serial port.
•• Female RJ45 connector.
Control the multiviewer using the Text Menu via RS232.
Selectable baud rate: 1200 to 115,200 bps.
•• Baud rate is set via the front panel interface, serial command, OSD,
or web interface.
Infrared Remote Control
„„
„„
„„
Routes video and audio signals together or independently.
Transmitter can be up to 30 feet (9.1 meters) away.
Power: two AAA batteries (included).
Keyboard/Mouse
„„
Use keyboard commands to select display mode and to select port.
•• Support for mouse commands coming soon.
HDMI Quad Screen Splitter/Multiviewer
NTI Part #
Supported Features
SPLITMUX-USBHD-4RT
SPLITMUX-USBHD-4RT-R
SPLITMUX-USBHD-4RT-2R
330.562.7070
International calls
© 2016, 2017 NTI. All rights reserved.
HDMI Multiviewer with Built-In KVM
Switch, Desktop
HDMI Multiviewer with Built-In KVM
Switch, 1RU Rackmount
HDMI Multiviewer with Built-In KVM
Switch, 1RU Dual Side-by-Side
Rackmount
330.562.1999
Worldwide fax
sales@ntigo.com
www.networktechinc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising