FCm-1300 High-Speed CMOS Camera

FCm-1300 High-Speed CMOS Camera
FCm-1300 High-Speed CMOS Camera
• 1.3 Megapixel 1280 x 1024 pixels (H x V)
• Monochrome and Colour versions available
• 10 bit digital output
• Compact design
• 450 full frames per second (464 peak)
• In-camera image storage memory
• Full Camera Link interface
The FCm-1300 camera is a very compact high
resolution, high-speed CMOS camera. The
camera is equipped with the Lupa 1300 image
sensor. The user can define any Window Of
Interest within the sensor area.
The digital camera can operate in single shot and
in continuous mode, which makes it ideal for
machine vision applications. In the single shot
mode, the user has the freedom to decide when
the camera has to capture an image, not the
other way around as is the case with most
analogue camera systems.
The camera has a dynamic range of 62 dB that
can be extended up to 100 dB using the dualslope feature.
C-Cam Technologies supply a Full Camera Link
as the standard interface, with 10 taps of 8 bits.
The camera can also be triggered through the
flexible Camera Link interface cable that can be
up to 7 metres long.
The FCm-1300 camera provides a complete
solution for system designers who require a rapid
solution with little or no involvement at chip level.
FCm-1300 High-Speed CMOS Camera
Sensor Specifications
Imager type CMOS integrating active
pixel sensor (APS)
Lupa-1300 designed by
FillFactory with incamera non-uniformity
and gain correction
Sensor types Monochrome or RGB
Bayer colour pattern
Total pixels 1310720 (1280 x 1024)
Tot. light-sensitive pixels 1310720 (1280 x 1024)
Window-of-Interest (WOI) Rectangle or line
image format specified
by the user
Active image area 17.9 x 14.3mm. (H x V)
Optical format 1.43” (3.6mm.)
Pixel pitch 14 x 14 µm
Fill factor 50 %
Spectral response 400 – 1000 nm.
Sensitivity 1500 V.m2/W.s.
8.33 V/lux.s (Visible)
21.43 V/lux.s (Vis + NIR)
Temporal noise 45e- (Dark @ 21ºC)
Well capacity 62,500 electrons
Dark current 300 bits / sec
Smear None
Standard dynamic range 62 dB
100dB with multi-slope
Signal / Noise 1330
Grey level resolution 8 bits or 256 grey levels
and
10 bits,1024 grey levels
MTF X:67%
PRNU 20% RMS at half
saturation
Image Specifications
Pixel rate 640 MHz (typical)
Frame speed 450 frames/second
full resolution 464 peak
140,000 lines/second
Frame speed WOI 1024 x 1024 : 573 fps
800 x 600 : 1227 fps
Maximal Exposure time 33.0 milliseconds
Minimal exposure time 2 µsec
Shutter On-chip pipelined snapshot
Shutter synchronisation Via software and/or via
external inputs:
Interface Specifications
Interface type Full Camera Link
10 taps of 8 bits
(compatible with Basler)
or 8 taps of 10 bits
Remote control Via digital LVDS interface
Interface connector 26p Camera Link type
with latches and screw
fastening
Cable lengths 1, 3, 5 or 7 meters from
camera to PC interface
Mechanical
Specifications
Dimensions 70 x 70 x 90 mm.
(not incl. lens)
Weight 400 grams (not incl. lens)
Housing Aluminium, black anodised
Lens adapter F-mount (with optional
macro adaptor)
Tripod mount 1/4 inch mount (1 off)
Machine mount M6 (4 off)
Environmental
Requirements
Operating temperature 0°C to +50°C
Storage temperature -30°C to +80°C in noncondensing conditions
Power Requirements
Power supply voltage separate connector
8 - 12 Volts
Power consumption (estimated) < 10 Watt
Ordering Information
B&W FCm1300-M
RGB Bayer FCm1300-B
C-Cam Technologies
Tel : +32 16 40 20 16
division of vectori n t e r n a t i o n a l
Interleuvenlaan 46,
B-3001 Leuven, Belgium
Fax : +32 16 40 03 23
www.vector-international.be
info@vector-international.be
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising