CompactPCI PP 712/08x
CompactPCI
PP 712/08x
N, E, K - Series
6U CompactPCI® board based on
Intel® Core™ i7 Processor
Key Features
®
PP 712/08x is a 6U CompactPCI board based on an
®
Intel Core™ i7 processor with two PMC/XMC sites.
 2 x PMC/XMC module sites with front and rear user I/O
 On-board storage options including:


2.5-inch SATA drive
CompactFlash® site
 Extended temperature versions available
®
 Wide Operating System support including Linux ,
®
®
®
Windows , VxWorks , QNX and Solaris™
SATA
to
EIDE
2 x Serial
Interfaces
x8
SATA300
x8
PCIe
MUX
Pn6
Local
Bus
x4
x8
3V
x8
PCIe
MUX
SPI BIOS
Flash
PCI-X 133 64-bit
XMC
x1
Module 1
DDR3
ECC
SDRAM
Intel
82577
Graphics
TM
XMC
CF
PMC/XMC
Interface
PMC/XMC
Interface
1 x Ethernet
2 x DVI-D
and VGA 10/100/1000Mbps
PCI-X 133 64-bit
2x
USB
Module 2
1x
RS232
x4
PCIe
to PCI-X
Bridge
x4
x1
PCIe
to PCI-X
Bridge
x1
Intel
82574L
IPMI
PCIe
to PCI
Bridge
Intel
82574L
64-bit
1 x IPMB0 IPMB1
RS232
3x
USB
Hi Def Digital
Stereo Audio
2 x Ethernet (PSB)
10/100/1000Mbps
PCI-66
CompactPCI
PMC Rear
I/O (via Pn4)
PMC Rear
I/O (via Pn4)
4 x SATA300
Concurrent Technologies Plc
4 Gilberd Court, Colchester, Essex, CO4 9WN, UK
Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116
Concurrent Technologies Inc.
400 West Cummings Park, Suite 1300, Woburn, MA 01801, USA
Tel: (781) 933 5900 Fax: (781) 933 5911
email:info@gocct.com http://www.gocct.com
All companies and product names are trademarks of their respective organizations.
Specification subject to change; E and OE.
Specification
Central Processor
 2.53 GHz Intel® Core™ i7-610E processor,
2.0 GHz Intel® Core™ i7-620LE processor or
1.33 GHz Intel® Core™ i7-660UE processor
 common processor features are:
 dual-core processor
 4 Mbytes shared Last Level Cache
 Intel® Hyper-Threading Technology
 Intel® 64 Technology (64-bit computing)
 Intel® Turbo Boost technology
 processor to DRAM memory, bus speed:
 610E and 620LE - 1066MHz
 660UE - 800MHz
 graphics engine, core clock speed:
 610E - 500MHz
 620LE - 266MHz
 660UE - 166MHz
 utilizes Intel® Platform Controller Hub (PCH):
 Mobile Intel® QM57 Express chipset
DRAM
 up to 8 Gbytes DDR3-1066 ECC DRAM:
 via two SODIMM sockets
 single bit error correction
 peak bandwidth of 17 Gbytes/s
 dual channel architecture
 accessible from processor and CompactPCI® bus
Mass Storage Interfaces
 1 x EIDE interface supports on-board
CompactFlash® socket
 4 x external Serial ATA300 interfaces:
 transfer rate up to 300 Mbytes/s
 optional on-board 2.5 inch SATA300 disk drive
 optional USB Flash disk on Transition Module
Ethernet Interfaces
 3 x Gigabit Ethernet interfaces
 front panel interface implemented by Intel® 82577
via x1 PCI Express® link via RJ45
 2 x rear interfaces implemented by Intel® 82574L
controllers via x1 PCI Express link:
 support for PICMG® 2.16 R1.0 - Packet Switching
Backplane (option)
 supports 10BASE-T, 100BASE-TX, 1000BASE-T
PMC/XMC Interfaces
 2 x PMC sites supporting:
 32/64-bit, 33/66/100/133 MHz PCI/PCI-X
 3.3V or 5V PCI signaling
 separate PCI Express to PCI-X bridges
 I/O via front and rear panel via Pn4
 2 x XMC sites supporting:
 up to x8 PCI Express link
 optional Pn6 to Pn6 high speed interconnection
bus
Serial Interfaces
 2 x RS232 serial channels:
 1 x Tx/Rx channel accessed via a 60-way highdensity connector on front panel
 1 x Tx/Rx channels via Transition Module
 16550 compatible UARTs
 front panel supports CTS and RTS, and rear panel
supports RI, CTS, RTS, DSR, DTR and DCD
Stereo Audio
 Intel® High Definition Audio via J5:
 optional codec module on Transition Module
Graphics Interface
 implemented by the integrated chipset graphics
controller
 resolutions up to 1920 x 1200 @ 16M colors
 dual digital DVI-D and single analog VGA via front
panel:
 digital, up to 1600 x 1200 @ 16M colors
 analog, up to 1920 x 1200 @ 16M colors
 support for Microsoft® DirectX 10
 support for OpenGL 2.0, Windows® and Linux®
 accessed via 60-way high-density connector
Other Peripheral Interfaces
 PC Real Time Clock
 watchdog timer; 32-bit Long Duration Timer with
processor interrupt ability; chipset timer
 system fan monitor; CPU temperature monitor;
voltages monitor; all accessible via IPMI
 5 x USB 2.0 interfaces:
 2 accessed via a 60-way high-density connector
on front panel
 3 interfaces accessed via J5
 independent legacy speaker output via J3
Firmware Support
 UEFI-compliant BIOS with legacy mode support
 comprehensive Power-On Self-Test (POST)
 LAN boot firmware included
Software Support
 Support for Linux®, Windows®, VxWorks®, QNX®
and Solaris™
Flash EPROM
 8 Mbytes of BIOS Flash EPROM
IPMI
 PICMG 2.9 R1.0 (System Management Spec.):
 implements the IPMB0 interface
 implements an IPMB1 interface
 on-board Baseboard Management Controller
 supports 8 Kbytes of non-volatile memory
Safety
 PCB (PWB) manufactured with flammability rating of
UL 94V-0
Please contact your local Concurrent Technologies sales office for further details on board build options and accessories.
CompactPCI Interface
compliant with PICMG 2.0 R3.0; 3.3V or 5V
signaling levels (universal signaling support)
 33/66 MHz, 32/64-bit interface accessed via J1/J2
connectors
 PCI Express to PCI bridge for off-board accesses
 J4 connector not fitted
 PICMG 2.1 R2.0 Hot Swap compliant
 operates as System Slot controller or in a Peripheral
slot
 option to disable CompactPCI® interface (Satellite
Mode):
 receives power from CompactPCI® bus
 board can be hot swapped
Electrical Specification
 +5V @ 5.7A (typical with 2.53 GHz processor
and 4 Gbytes DRAM); voltage +5%/-3%
 +3.3V @ 5.4A; voltage +5%/-3%
 +12V @ 0.01A; voltage +5%/-5%
 -12V not required
 +12V and -12V routed to PMC/XMC slots
Environmental Specification
 operating temperatures:
 0°C to +55°C (N-Series)
 -25°C to +70°C (E-Series: 2.0 GHz, 1.33 GHz)
 -40°C to +70°C (K-Series: 2.0 GHz)
 -40°C to +75°C (K-Series: 1.33 GHz)
 non-operating temperature: -40°C to +85°C
 5% to 95% Relative Humidity, non condensing:
 K-Series includes humidity sealant
Mechanical Specification
 6U form-factor: 9.2-inches x 6.3-inches (233mm x
160mm)
 single-slot: 0.8-inches (20.3mm)
 connectors: IEC-1076-4-101 for J1-J5
 shock: 20g, 11ms, ½ sine
 vibration: 5Hz-2000Hz at 2g, 0.38mm peak
displacement

Datasheet Code 1623/0217
© Concurrent Technologies 2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising