MOBILE MULTIMEDIA DISC PLAYER

MOBILE MULTIMEDIA DISC PLAYER
MOBILE MULTIMEDIA DISC PLAYER
3/4 DIN MULTIMEDIA DISC PLAYER
SRC
Precautions
1- 3
Identification of controls
4-6
Front panel
Remote control
When using remote control
Quick Guide
7- 10
Lo adi ng and un loa di ng a di sc
7
Turning the power on and off
Source
Setting volume level
Displaying the disc status
Tuning the sound on and off
8
Playing a disc
9
Stopping playback
Fast-forwarding/ fast-reversing
Finding the beginning of chapters or tracks
10
Convenient Functions
11
Chapter/track/title repeat playback
Playing from the desired location
Changing the default settings(setup)
12-13
Installation and connections
14-17
Others
18-19
In case of difficulty
18
Specifications
19
This digital versatile disc (DVD) video player uses 12V +20%
-10% DC.
For future reference, record the model and serial number
(located on the case of the DVD player) in the space provided.
CAUTION:
This DVD VIDEO PLAYER IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES.
DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING : class 1 laser product - avoid long term viewing of direct laser radiation.
WARNING OF DEW FORMATION
Dew may form on the pickup lens in the following conditions.
- Immediately after a heater has been turned on.
- In a steamy or very humid room.
When the unit is suddenly moved form a cold environment to a warm one.
If dew forms inside this unit ,it may not operate properly.
In this case, turn on the power and wait about 2 or 3 hours for the dew to evaporate.
When the unit is used under low temperatures.
The pick up lens might warm up very fast and dew will form.
In this case ,turn on the power and wait a while for the dew to evaporate.
2
Caution
This symbol means important instructions.
Failure to heed them can result in injury or property damage.
sure safety, always contact the dealer where you purchased this product to have the work done
Be sure the temperature inside the vehicle is between +55 C (+131 F) and -5 C(+23 F)
before turning your unit on.
Make sure the unit will not be installed in a location subjected to:
High humidity and water
Direct sun and heat
Excessive dust
3
Excessive vibrations
Front panel
Disc solt/
open, close indicator
3/4 DIN MULTIMEDIA DISC PLAYER
SRC
MUTE
button
STOP
button
POWER /SOURCE
button
SKIPbutton
PLAYER/PAUSE
button
EJECT
button
SKIP+
button
The button
SRC
Long press is POWER function to power on/off ,
short press is SOURCE function to select different
source ( player or AUX or USB)(OPTIONAL)
To stop playback
To locate previous/next chapter or track
Play/ pause, make sure to transform to the AUX(optional)
To eject a disc
playing with no sound
Resetting the unit
Press the RESET button with a pointed object,
3/4 DIN MULTIMEDIA DISC PLAYER
such as a ballpoint pen, as shown.
SR C
Unit will turn off momentary after the
RESET button is pressed.
Note : pressing the RESET button
will erase some stored contents.
RESET button
4
SUB.
CLEAR
GOTO
ANGLE
AUDIO
DISPLAY
power on/off button
GOTO button to location
by entering its corresponding track
number,chapter number or time
Long press is CLEAR function
to clear the wrong number you entered.
button to eject the disc
SOURCE button (optional)
to select different sources
(DVD or AUX or USB)
Long press is SUBTITLE function
to select the DVD disc subtitle
REPEAT.button
AUDIO button-toselect DVD audio
or VCD audio stereo
Long press is TITLE function
to locate a specific title chapter or track
MENU button
to locate a specific DVD root MENU
or VCD PBC on/off.
VOL button
SETUP button
To change the default settings
mute button
playing with no sound
DISPLAY button to display the disc staus
5
3/4 DIN MULTIMEDIA DISC PLAYER
This section shows you how to use the
remote control. Point the remote control
at the remote sensor and press the buttons.
The remote range: about 4m from the front
of the remote sensor.
(Is) off axis: more than 30L in each direction
of the remote sensor.
SR C
SU
CL
EA
B.
R
GO
TO
AN
AU
GL
E
DIO
DI SP
LAY
Do not expose the remote sensor of the DVD player and the remote control to a
strong ling source such as direct sunlight or other illumination. If you do so ,you
may not be able to operate the DVD player via the remote control.
6
Lo adi ng and un loa di ng a di sc
Turn on the power before loading and unloading discs.
1
Insert the disc with the side containing
words diagrams facing upwards.
2
Once the disc is partially inserted, it is
drawn in automatically. Playback starts.
Unloading disc
Press
button, the disc is
automatically ejected.
3/4 DIN MULTIMEDIA DISC PLAYER
3/4 DIN MULTIMEDIA DISC PLAYER
SR C
SR C
Notes:
If wrong disc, upside-down discs or dirty discs
have been inserted, “NO DISC” is displayed.
Remove the disc.
Do not put any objects other than discs into the
disc slot. doing so may cause the player to
malfunction.
These indicate the disc for which the function can be used.
This owner’s manual explains the basic instructions of this DVD player, some DVD
disc are produced in a manner that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating commands. This is not a
defect in the DVD player. Refer to the instruction notes of discs.
“
“may appear on the screen during operation.
A“
“ means that the operation is not permitted by the DVD player or the disc.
7
SUB.
The transform mode switches each time
the button is pressed.
DVD PLAYER
press SOURCE
+
button
AUX
press SOURCE
USB
press SOURCE
3 Setting volume level
1
Press the
button of
the remote control, the power turns off.
To turn the power on, press the
button
again.
First press VOL button on the remote,
then press the
button to
increase or decrease voloume level
4
2
During playback pree
,no sound
is played.Press to resume normal
playback with sound.
SOURCE(optional)
Select DVD player or AUX input
or USB by pressing the
SOURCE button.
Connect
5
During playback,
SOURCE
Using AUDIO and VIDEO IN,
connect the DVD video player
to a VTR, TV/VTR combination
or video selector.
AUX
USB flash car for Mp3 /
WMA /JPEG /AVI /format
USB
press DISPLAY buttonto
appear the playback status ;
press DISPLAY button again to turn off
the playback status.
8
AUDIO
AUDIO
also be displayed by pressing MENU or
long pressing
button
AUDIO
9
10
SUB.
SUB.
GOTO
pressing
SUB.
GOTO
SUB.
button
RPT.
RPT.
AUDIO
AUDIO
Playing form
the desired location
Locating a specific location by entering
the track number, the chapter number
or the time
GOTO
AUDIO
pressing
AUDIO
During playback, press GOTO.
button
2
Input the chapter the title or the time
from which you want to start playback
using the joystick and the number
keys(0~9).
Notes:
Input the hours first, followed by the
minutes, then the seconds.
Press CLEAR to delete all digits you
input.
Press ENTER
Playback starts from the selected chapter,
track or the time.
3
5
RPT.
RPT. button.
AUDIO
pressing
AUDIO
button
11
1 Language setup
Language
Video
:ASC
DIVX subtitle
2 Video setup
TV System
12
: Multi
3 Audio setup
Digital output
:PCM
Night Mode
:Off
4 Rating setup
5 Others setup
13
1,2,3
14
Accessories and hardware
1
Basic
3A
x2
2
Optional (1)
Remote control
sensor unit
3
Optional (2)
L-shaped bracket
x2
4
Hex bolt M3 x 20
x4
Hex bolt M2.5 x 5
x4
Optional (3)
Mounting bracket
(half sleeve)
Note:
Outer trim frame
The are 2 mounting screws on the case of
DVD player to protect unit during shipping.
Be sure to remove these screws before
installing the unit. Cover the holes with
the dustproof paster.
Bracket
x2
Two black sticking papers
MOVE THE SCREWS BEFORE FIXING!
WARNING:
Key
x2
Mounting screw M5
X1
3/4 DIN MULTIMEDIA DISC PLAYER
SR C
Mounting grommet
X1
metallic pad
x1
Hex bolt M2.5 x 5
x8
15
!
Rear strap
(brace)
Installation method 1
Installation method 2
screw
M2.5*5
screw
M2.5*5
screw
M 3 *20
screw
M3*20
Installation method 2
Bend these claws outward
for a tight fit, if necessary.
1 2
To install the unit firstly,
3 4
then put the unit into the outer trim frame after
tear the double-face rubberized fabric off.
To support the unit
16
Front wall of
the cab
Rear of product
PHONES
Left(WHITE)
Right(RED)
YELLOW
NACARAT
PHONES
3A
USB jack
AUDIO IN (RIGHT)
AUDIO IN (LEFT)
AUDIO OUT (RIGHT)
AUDIO OUT (LEFT)
VIDEO IN
VIDEO OUT
COAXIAL
BLACK - POWER GROUND
BLUE - STANDBY OUT
VIDEO input (RCA)
VIDEO output (RCA)
COAXIAL cable 75
YELLOW - +12V BATT
AUDIO input (RCA)
AUDIO output (RCA)
RED - +12V ACC
remote control sensor jack
(OPTIONAL)
YELLOW: (+) pos. 12 volt constant input
RED: (+) pos. 12 volt accessory input
BLUE: (+) 300mA max. standby output
BLACK: (-) neg . ground input. To vehicle chassis
Caution
Be careful that the vehicle’s cords do not touch the unit.
If the cords are in contact with the unit, their sheaths may be damaged due to vibrations generated
while the vehicle is running, resulting in short-circuit.
Leave enough space when routing wires to prevent contact between the vehicle’s wires and the unit.
17
18
0.2V
Audio
Audio output(analog):
1.9
Video
Video output:
Resolution:
1 0.2V 75
more than 500
Power requirement:
Power consumption:
12 -10% V DC
less than 20 W
Power
General Dimensions(approx.):
Weight:
100k
line
+20%
160x44x165mm
(w/h/d) incl. Projecting parts
1.4Kg
Normal operating temperature range: -5°C(+23°F) TO+55° C(+131° F)
Design and specifications are subject to change without notice.
The illustrations in this manual may appear different from the
actual product due to printing conditions.
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising