Technical Specifications - AV
MASK4T-W
MASK4T-W
4.25" small design two-way
loudspeaker , white
The MASK4T loudspeaker has a unique innovative design
and its transparent sound offers incredible intelligibility
ideal for background music and paging purposes. MASK4T
can be used in low impedance 16 ohms (up to 4
loudspeakers in parallel on a standard 4 ohms amplifier
channel) or in 100 volt with several power tappings (20 –
10 – 5 – 2.5 watts).
The cabinet is made of high quality enforced PPE ABS. The
grille is made of aluminium and the woofer has been
coated so MASK4T loudspeakers are suitable for both
indoor and outdoor use. The cabinet is supplied with a
rubber IP protection cover for the loudspeaker terminals.
This way water ingress and corrosion of the terminals is
avoided (IP64).
MASK4T has a powerful 4.25” coated paper cone woofer.
Together with the Vari-throat horn for the Ferro-fluid
cooled 1” silk dome tweeter this results in a high SPL and
ultra low distortion.
Forhandler:
AV-­‐Concept aps
Tlf. 30321889
www.av-­‐concept.dk
Its phase alignment and wide frequency range makes sure
every note, starting from the robust low-mid over the clean
middle range to the crystal clear highs, reaches your ears
with an astonishing clarity.
The built-in Auto-Reset 3-step Protection Guard together
with the quality components makes MASK4T a fail-safe
loudspeaker, even at high power loads!
Thanks to the Intelli-Mount bracket, the MASK4T is easy
and fast to install. The Vari-throat horn for the tweeter and
the 5° down tilt angle in which the woofer and tweeter are
mounted in the cabinet, guarantee a perfect sound
dispersion, without the need of a big tilt angle of the
cabinet itself. The cabinet has a M8 thread mounting point
tapped at the back of the cabinet. This way many other
mounting systems can be used.
From 12 pieces on, MASK4T loudspeakers can be painted in
any other RAL colour (REF: PAINTCAB6).
TECHNICAL SPECIFICATIONS
height in mm
220
width in mm
129
depth in mm
130
loudspeaker system
2-way
woofer size in inch
4,25
woofer cone material
coated paper
tweeter size in inch
1
mounting system
intellimount
colour
black / white / silver
low impedance dynamic power
in watts
70
100V transformer power taps in 20 - 10 - 5 - 2.5
watts
max SPL 1m in dB
SPL 1W/1m in dB
89
104
frequency response in Hz
80 - 20K
main construction material
ABS plastic
grille main material
aluminium
IP rating
64
180°
Vertical dispersion angle 1000
Hz
180°
Horizontal dispersion angle
1000 Hz
Net weight product (kg)
2,15
www.apart-audio.com | info@apart-audio.com
MASK4T-W
MORE PICTURES
www.apart-audio.com | info@apart-audio.com
MASK4T-W
ACCESSORIES
MASKW-W
MASKV-W
Double V-shaped cluster bracket for MASK4(T)-W/MASK6(T)W
V-shaped 2-way cluster bracket for MASK4(T)-W / MASK6(T)W
MASKL-W
L-shaped side bracket for MASK4(T)-W / MASK6(T)-W
Forhandler:
AV-­‐Concept aps
Tlf. 30321889
www.av-­‐concept.dk
www.apart-audio.com | info@apart-audio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising