DT3130 Datasheet - Aashay Measurement , we provide Complete

DT3130 Datasheet - Aashay Measurement , we provide Complete
Compatible Windows Software
■
■
DT Vision Foundry
GLOBAL LAB Image/2
DT3130 Series for
Machine Vision
Simultaneous Input Frame Grabber Boards
for the PCI Bus
Key Features
■ Contains the functionality of up to
three frame grabbers on one PCI short
card, enabling multiple image acquisition at a low cost.
■ Handles monochrome, composite color,
and S-video input sources.
■ Available option adds isolation from
the hazards of an industrial
environment.
The DT3131, DT3132, & DT3133 offer one, two, or three frame
grabbers on a single half-
■ Programmable strobe outputs for
Overview
precise camera control.
■ 12 volt camera power connection.
■ PCI Bus Master and Scatter/Gather
architecture for intelligent image data
management; enables acquisition and
transfer to host memory at 30 fps
(RS-170/NTSC), 25 fps (CCIR/PAL).
■ Ships with valuable software bundle
featuring WDM drivers, software
evaluations, a Frame Grabber SDK, and
DT-Acquire ready-to-run application.
Ideal for applications requiring simultaneous image acquisition from multiple
sources, low-cost DT3130 Series frame
grabbers contain the functionality of up to
three individual frame grabbers, all on one
half-size PCI board.
An option adds isolation from the
hazards of an industrial environment,
letting you add the features your application requires without paying for
unneeded extras.
Extensive Input Flexibility
The DT3130 Series has three different
configurations:
• The DT3131 features one active
inputand three muxed, for up to three
NTSC/PAL color cameras, or one Svideo and two 170/CCIR, NTSC/PAL,
cameras.
Ideal Applications
Visual Inspection
Machine Vision
Automated Medical Imaging
Surveillance
• The DT3132 includes two active inputs
or six muxed, for up to six NTSC/PAL
color cameras, or two S-video and four
RS-170/CCIR, NTSC/PAL cameras.
• The DT3133 includes three active
inputs or nine muxed, for input of up
to nine RS-170/CCIR monochrome,
NTSC/PAL color cameras, or three Svideo and six RS-170/CCIR, NTSC/PAL
cameras.
Features Summary
Camera Inputs
Board
DT3131
DT3132
DT3133
Active
1
2
3
Muxed
3
6
9
External
Trigger Inputs
1
2
3
Strobe
Outputs
1
2
3
DT3130 Series
BUS: PCI
Type: Simultaneous Input Frame Grabber Boards
Flexible Operation
The DT3130 Series is designed for complete operational flexibility. The onboard frame grabbers are completely
independent, with independent trigger
inputs and output strobes, and can be
operated individually or simultaneously.
This allows you to tailor the board configuration to meet your specific application requirements—whether they are for
scientific image analysis of individual
images or for multiple simultaneous
image acquisition for machine vision
applications.
Industrial Options
to Meet Your Needs
Designed for use in industrial installations, the DT3130 Series frame grabbers
can be equipped with isolated trigger
inputs and isolated strobe outputs via an
isolation option (DT3131-ISO, DT3132ISO, DT3133-ISO).
Precise Camera Control
Each frame grabber on the DT3130
Series boards includes flexible HSYNC
and VSYNC count capabilities, as well
as a programmable output strobe. Each
frame grabber’s strobe output can be
based on the HSYNC or VSYNC count,
and can be run in one-shot, continuous,
or software controlled strobe modes. The
strobe outputs have both polarity and
pulse-width programmability. This feature allows for precise synchronization
and control of cameras and light sources
for demanding applications. In addition
this feature makes the DT3130 Series
suitable for a variety of other applications that require the control of external
events based on video sync timing.
Extensive Software Support
The included Imaging Omni CD provides
the tools you need to set up your Data
Translation PCI frame grabber and develop imaging applications.
The Imaging Omni CD includes:
■ DT-Acquire – Use this ready-to-run software application to verify the operation
of your Data Translation frame grabber
2
Data Translation, Inc.
Real-Time Display, Non-Destructive Overlays
The DT3130 Series employs Microsoft’s
DirectDraw (DDI) standard, allowing you
to display real-time, live video with nondestructive overlays without adding
costly display hardware (i.e. VGA circuitry) to the frame grabber. This
approach offers many advantages over
traditional frame grabber display and
overlay methods, including:
Minimal CPU Bandwidth: The
DirectDraw display technique requires
minimal CPU bandwidth, leaving the
CPU free to perform image processing
or other tasks. Ideal for applications
where display video and processing
occur simultaneously, DDI allows for
stagger-free images and smooth flowing,
real-time video with overlays.
Upgradable Compatibility: With DDI,
your DT3130 Series frame grabber will
work with any DirectDraw-compatible
graphics card. And since DirectDraw is
enabled through the graphics card driver,
during startup, and to capture, display
and save images.
■ Frame Grabber SDK – This allows
Microsoft C programmers to develop
your own application software in
Windows 2000/XP.
■ Device Driver – You must install this
device driver to use your Data
Translation frame grabber with any of
the supported software packages or utilities. The device driver is for use with
Windows 2000/XP.
■ DT Vision Foundry Evaluation – DT
Vision Foundry is a versatile and extensible machine vision software package
that integrates powerful vision tools
with multiple programming environments to provide a robust, flexible,
easy-to-use visual inspection package.
DT Vision Foundry is supported under
Windows 2000/XP. The Imaging Omni
CD lets you evaluate the great new features of DT Vision Foundry for 14 days.
■ GLOBAL LAB Image/2 Evaluation –
US and Canada (800) 525-8528, (508) 481-3700
UK 1256 3333 30
you can upgrade an existing graphics
card to DDI by simply loading a new driver.
Flexible Graphics Card Selection:
Because the graphics card is not built
onto the frame grabber, you are not
“locked in” to the performance of the
frame grabber’s display circuitry. This
allows you to choose the frame grabber that suits your needs and the
graphics card that meets your performance requirements and budget.
Additional Features: Since DDI is the
same overlay technique used by video
game manufacturers, this capability
gives you the ability to have nondestructive overlays of any size, shape,
or color on
top of live video. In addition, overlays
can be translucent (semi clear), rotated,
animated, or even placed over scaled
images.
GLI/2 is a complete image analysis software package, ideal for scientific and
general-purpose applications that
require measuring, classification, counting, and other analysis. GLI/2 is supported under Windows 2000/XP. The
Imaging Omni CD lets you evaluate the
great new features of GLI/2 for 14 days.
■ Documentation – User and Getting
Started Manuals in PDF format.
Technical Support
As you develop your application,
technical support is available when
you need it. Extensive information is
available 24 hours a day on our web
site at www.datatranslation.com,
including drivers, example code,
pinouts, a searchable KnowledgeBase,
and much more.
Support is also available from your
point of purchase. Telephone support
is free for the first 90 days; you can also
request complimentary support via
e-mail or fax at any time.
Germany (07142) 95 31-0
Internet www.datatranslation.com
A/D Stage
Video Inputs
0:2
Input
Multiplexer
8-Bit
CrCb
Trigger
Input
*
Isolation
Programmable
Image
Cropping
Clock
Synchronization
Sync
Stripper
Camera
Control
Output
Programmable
Image
Scaling
8-Bit Y
Acquire
Clock
28.6 MHz
Programmable
Clock Control
Logic
FIFO
PCI Bus
Interface
PMC
Connector
32
32
Secondary PCI Bus
*
Isolation
32
PCI to PCI
Bridge
32
PCI Bus
*Used for ISO Option
DT3131 Block Diagram
3131 User Connections
Description Pin
6
N/C 8
15 12V Ground
N/C 7
N/C 6
11 14 +12V
1
13 N/C
Strobe Out + 5
12 N/C
N/C 4
N/C 3
Trigger in – 2
Trigger in + 1
Pin Description
11 N/C
5
15 10 Strobe Out –
9
10
Connector J1
N/C
Description Pin
Pin Description
6
N/C 8
15 Analog Ground
N/C 7
N/C 6
11 14 N/C
1
13 N/C
GND 5
12 N/C
C0 4
VID2 or Y0 3
VID1 2
VID0 1
11 N/C
5
15 10 Ground
9
N/C
10
Connector J2
M-5899
DT3130 Series
BUS: PCI
Type: Simultaneous Input Frame Grabber Boards
Bold outlines indicate two identical circuits
A/D Stage
Programmable
Image
Scaling
8-Bit Y
Video Inputs
0:2
3:5
Input
Multiplexer
8-Bit
CrCb
Programmable
Image
Cropping
FIFO
Clock
Synchronization
Sync
Stripper
Camera
Control
Outputs
0:1
Trigger
Inputs
0:1
*
Isolation
PCI Bus
Interface
Acquire
Clock
28.6 MHz
Programmable
Clock Control
Logic
PMC
Connector
32
32
Secondary PCI Bus
*
Isolation
32
PCI to PCI
Bridge
32
PCI Bus
*Used for ISO Option
DT3132 Block Diagram
3132 User Connections
Description Pin
6
Strobe Out 1+ 8
Trigger in 0– 2
Trigger in 0+ 1
VID3 6
VID2 or Y0 3
15 10 Strobe Out –
Strobe Out 1–
10
VID1 2
VID0 1
Connector J1
4
Data Translation, Inc.
US and Canada (800) 525-8528, (508) 481-3700
13 N/C
12 N/C
C0 4
11 N/C
9
11 14 N/C
1
GND 5
12 N/C
5
15 Analog Ground
VID4 7
13 N/C
Trigger in 1– 4
Pin Description
6
VID5 or Y1 8
11 14 +12V
1
Strobe Out 0+ 5
Trigger in 1+ 3
Description Pin
15 12V Ground
N/C 7
N/C 6
Pin Description
11 N/C
5
15 10 Ground
9
Connector J2
UK 1256 3333 30
C1
10
M-5899
Germany (07142) 95 31-0
Internet www.datatranslation.com
Bold outlines indicate three identical circuits
A/D Stage
Video Inputs
0:2
3:5
6:8
8-Bit Y
Input
Multiplexer
8-Bit
CrCb
Sync
Stripper
Camera
Control
Outputs
0:2
Trigger
Inputs
0:2
Programmable
Image
Scaling
*
Isolation
Programmable
Image
Cropping
FIFO
Clock
Synchronization
PCI Bus
Interface
Acquire
Clock
28.6 MHz
Programmable
Clock Control
Logic
PMC
Connector
32
32
Secondary PCI Bus
*
Isolation
32
PCI to PCI
Bridge
32
PCI Bus
*Used for ISO Option
DT3133 Block Diagram
3133 User Connections
Description Pin
6
Strobe Out 1+ 8
15 12V Ground
Trigger in 2– 7
Trigger in 2+ 6
11 14 +12V
1
13 N/C
Strobe Out 0+ 5
12 Strobe Out 2–
Trigger in 1– 4
Trigger in 1+ 3
Trigger in 0– 2
Trigger in 0+ 1
Pin Description
11 Strobe Out 2+
5
15 10 Strobe Out 0–
9 Strobe Out 1–
10
Connector J1
Description Pin
Pin Description
6
VID5 or Y1 8
15 Analog Ground
VID4 7
VID3 6
11 14 C2
1
13 VID8 or Y2
GND 5
12 VID7
C0 4
VID2 or Y0 3
VID1 2
VID0 1
11 VID6
5
15 10 Ground
9
C1
10
Connector J2
M-5899
DT3130 Series Specifications
Video Input
Video Format: Composite video and S-video
(Y/C) formats; RS-170, RS-330, and NTSC
(60 Hz) or CCIR and PAL (50 Hz); interlaced;
software selectable
Timing Format: Standard 60 Hz and 50 Hz
timing formats are supported;
software selectable
Inputs:
DT3131: 1 active input at any one time; 1
active composite out of 3 multiplexed composite, or 1 S-video and 2 composite; all
inputs ac coupled
DT3132: 2 simultaneously active inputs at
any one time; 2 active composite out of
6 multiplexed composite, or 2 S-video
and 4 composite; all inputs ac coupled
DT3133: 3 simultaneously active inputs at
any one time; 3 active composite out of
9 multiplexed composite, or 3 S-video
and 6 composite; all inputs ac coupled
Video Signal: 1 volt peak to peak, 75 ohms
Spatial Resolution: 640 x 480 (60 Hz);
768 x 576 (50 Hz)
Acquisition
Digitization: Twin 8-bit A/Ds, one for
monochrome, and one for chroma;
data derived to YCrCb format.
Pixel Jitter: ±6 nsec maximum
Aspect Ratio: 1:1 Square pixels,
depending on scaling factors
Frame Grab Speed: 1/30 s (60 Hz),
1/25 s (50 Hz)
Modes: Interlaced (start on next even,
next odd, or next field), single frame
or continuous operation; all software
selectable
active video input; individually controllable;
TTL levels; Programmable HSYNC and
VSYNC counts; Strobe output pulse-width
programmable from 3.3 to 427 msec with
selectable polarity
Control Signal Isolation:
Available via the ISO option.
Data Formats
Image data can be output in 32, 24, 16,
and 15-bit RGB, 16-bit YUV, or 8-bit
monochrome formats
Control Signals
External trigger inputs: DT3131: 1 total;
DT3132: 2 total, DT3133: 3 total
TTL levels—one per active video input
Camera strobe outputs: DT3131: 1 total;
DT3132: 2 total, DT3133: 3 total—one per
6
Data Translation, Inc.
■ Pentium-III
class processor
PCI bus and supporting BIOS
■ At least one available PCI Bus slot
■ Microsoft Windows 2000/XP
■ 256 MB of system RAM minimum
■ CD-ROM drive (for software installation)
■ Graphics controller with DirectX driver
■ 32-bit/33MHz
Video Display
Uses PC’s graphics card and monitor for
display. Real-time video display and
non-destructive, real-time animated overlays
performed using DirectDraw (DDI)
Video Transfer Rate
55 MB/s typical, 132 MB/s max. Board
operates as a Bus Master using Burst Mode
for data transfer to host memory. Intelligent
Scatter/Gather architecture used for image
data management in host memory.
Power Requirements
Physical and Environmental
Form: Half-size PCI bus board (short card)
Dimensions: 10.7 cm x 17.5 cm
(4.2 in. x 6.875 in.)
Weight: 150 g (5.3 ounces)
Operating Temperature: 0° to 50° C
(32° to 122° F)
Storage Temperature: –25° to 70° C
(–13° to 158° F)
Relative Humidity: Up to 90%, non-condensing
Warranty
One year limited parts and labor
ISO Option
Factory-installed option provides isolation
for all DT3130 Series control signal inputs
and outputs
Trigger Inputs
Number: 3 inputs
Isolation: optical isolation, ≥250 VDC
Logic High input voltage 3.5-32 VDC
Logic Low input voltage <1.0 VDC
Input resistance 3.3 k Ω typical
Strobe Outputs
Number: 3 outputs
Isolation: optical isolation, ≥250 VDC
Maximum Load current 100 mA
Maximum load voltage 40 VDC
Overcurrent protection @300 mA
US and Canada (800) 525-8528, (508) 481-3700
UK 1256 3333 30
Ordering Summary
All Data Translation hardware products are covered by a 1-year
warranty. For pricing information see a current price list, visit
our web site, or call your local reseller.
The DT3130 frame grabber is shipped with the Imaging
Omni CD, a valuable software bundle which includes
evaluations of DT Vision Foundry and GLOBAL LAB
Image/2, WDM device drivers, EP315 .3m (1 ft.) power
cable for camera, complete documentation, a software
development kit, and a ready-to-run software application.
■ DT3131—Single frame grabber board, 3 inputs
(muxed), 1 active (RS-170/NTSC, CCIR/PAL)
+5 V @ 1 A typical
+12 V @ 1.5 A max (for camera power)
via CPU power supply harness
On-Board Processing
Region Of Interest: Programmable
ROI window defines video data to be
transferred to memory; pixels outside
window are discarded
Scaling: Images scaleable to 4 pixels by 4 lines,
performed using linear phase interpolation;
software selectable
System Requirements
■ DT3132—Double frame grabber board, 6 inputs
(muxed), 2 simultaneously active (RS-170/NTSC,
CCIR/PAL)
■ DT3133—Triple frame grabber board, 9 inputs
(muxed), 3 simultaneously active (RS-170/NTSC,
CCIR/PAL)
■ DT3131-ISO*—DT3131 with isolation option
■ DT3132-ISO*—DT3132 with isolation option
■ DT3133-ISO*—DT3133 with isolation option
*This is not a user-installable option and must be factory
installed when ordered. Call for information on OEM and
volume discounts.
Accessoriesnput/outpSeries
boards
■ EP311—6 m (2 ft.) 15-pin cable for video connection
(up to 3 cameras simultaneous)
■ EP312—1.0 m (3 ft.) 15-pin cable for
control signal connection (up to three triggers, three
strobes, and 12V power)
■ EP314—.6 m (2 ft.) cable for connection of up to 9
cameras multiplexed
■ EP317—2 m (6 ft.) cable forS-video connection
(1 camera)
■ DT3130 Series User’s Manual in hard-copy form
Software
All software packages include a copy of the software on
CD-ROM, and 90 days of complimentary telephone support.
■ DT Vision Foundry Machine Vision Software
SP1400-CD Development
SP1402-CD Run-Time
■ GLOBAL LAB Image/2 Image Analysis Software
SP1500-CD
■ DT-Active Open Layers ActiveX Control
SP0974-CD
© Copyright 2003 Data Translation, Inc. All rights reserved.
All trademarks are the property of their respective holders.
Prices, availability, and specifications subject to change with
out notice. 17523-1
Germany (07142) 95 31-0
Internet www.datatranslation.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising