ff10.0 ff8.0 ff6.0 ff3.6 full frequency amplifiers

ff10.0 ff8.0 ff6.0 ff3.6 full frequency amplifiers
NCA AMPLIFIERS
FULL FREQUENCY AMPLIFIERS
FF10.0
DATASHEET
FF8.0
FF6.0
FF3.6
FFA-3600 • FFA-6000 • FFA-8000
Producing up to 5000+Watts per channel and the
ability to really drive 2 Ohm impedance loads without
sacrificing sound quality Noise Control Audio amplifiers deliver awesome performance in lightweight
standard 2RU packages. Three amplifier models are
available using high efficiency cool operation Class D
amplifier topology.
All feature aluminium construction with custom
designed heatsinking giving strength and rigidity tothe
amplifiers chassis. Tough Dupoint paint finish protects
the case exterior. Bead blasted anodised, custom
extruded, milled front panel and handles. Our amplifiers
are designed to perform in the harshest environments
that the professional audio industry presents to audio
equipment.
The FF-6.0 and FF-8.0 and FF10.0 amplifiers feature dual
switch mode power supplies. Each amplifier is a mono
block system which is independent of its ‘partner’
channel.
All FF amplifiers are ideally suited to drive ' 2 Ohm' loads
in the most demanding applications thus giving best
amplifier to loudspeaker ratio. The FF-8.0 and FF10.0
offer ultimate low frequency amplification for specialist high power sub bass systems.
Designed and manufactured in England.
FEATURES AT A GLANCE
• Weight 12kg
• Dual power supply
• Built-in clip limiter
• Innovative cooling system
• 100% aluminium casing
• Aluminium extruded front panel
• High current Neutrik SPEAKON ®
NL4MP-UC connectors
• 2 Ohm drive
• Power supply soft start
• 4 year warranty
www.NoiseControlAudio.com
WWW.NOISECONTROLAUDIO.COM
NCA AMPLIFIERS
FULL FREQUENCY AMPLIFIERS
FF10.0
FF8.0
FF6.0
FF3.6
FFA-3600 • FFA-6000 • FFA-8000
DATASHEET
Power Ratings
Measured per channel, driven at 1 kHz, 240 VAC supply voltage to no more than 1% THD
FF-3.6 – 8 Ohms 650W, 4 Ohms 1200W, 2 Ohms 1900W rms
FF-6.0 – 8 Ohms 1000W, 4 Ohms 1800W, 2 Ohms 3000W rms
FF-8.0 – 8 Ohms 1250W, 4 Ohms 2400W, 2 Ohms 4000W rms
FF-10.0 - 8 Ohms1500W, 4 Ohms 3000W, 2Ohms 5000+W rms
Gain
THD
FF3.6 = 30dB FF6.0, FF8.0 and FF10.0 = 32dB
Typical 0.05% 4 Ohm 1kHz THD+N
Frequency Response
20 Hz - 20 kHz
Controls
FF-3.6 single power on switch.
FF-6.0 / FF-8.0 / FF10.0 power on switch each channel. Channel A+B 40 point Potentiometers.
Indicators
Indicators Power on - green LED, Signal present green LED, signal -10dB drive yellow LED,
onset of amplifier clip red LED. Amplifier protect due to over temp, clip limiter activated,
3 second mute on power up or fault red LED.
Cooling
Variable speed high CFM fan, rear to front air flow.
Load Protection
DC on output, clip limiter.
Amplifier Protection
Short circuit, current overload, thermal, reactive load stability
Inputs
Professional Neutrik XLR with link provided for signal ‘daisy chaining’.
Outputs
2 high current Neutrik NL4MP-UC SPEAKON® connectors per channel. All poles live 1+,1-,2+,2-.
Power Supply
FF-3.6 single input IEC high current switch mode.
FF-6.0 / FF-8.0 / FF10.0 dual input IEC dual high current switch mode power supply
.
Power Requirements
220 - 240 VAC 50 - 60Hz, 1 x 10A circuit FF3.6, FF6.0, FF8.0 2 x 10A circuits.
Power Operational Range
185V - 240 VAC
Dimensions
2RU 19” rack mount enclosure, H88mm x W483mm x D510mm.
Depth includes integral rear rack support ears.
Weight
FF-3.6 – 10kg
FF6.0 / FF8.0 / FF10.0 – 12kg. h
Trades descriptions act. NCA has a policy of continued product improvement and accordingly reserve the right to change features and specifications without notice.
DEALERS STAMP
e
tel: +44 (0) 208 808 1923 skype: NoiseControlHQ email: info@noisecontrolaudio.com
www.NoiseControlAudio.com
WWW.NOISECONTROLAUDIO.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising