15” two-way passive touring speaker 15”

15” two-way passive touring speaker 15”
15” two-way passive touring speaker |
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
99 dB @ 1w/1m
126 dB continuous
129 dB
130 dB
Frequency Response (-6dB)
48 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 50°
Recommended Amplifier
≤ 1200 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Preset EQ’s
500 w RMS (EIA 426A standard)
1000 w
2000 w
40Hz 24dB/oct Butterworth
60 to 130Hz 24dB/oct Linkwitz-Riley
Passive @ 2 kHz
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380mm)
diameter cast frame / Neo magnet, 3” high temperature voice coil on glass fibre former
High Frequency Driver
High Frequency driver, 1” (25mm) exit, 1.7” (44mm)
voice coil, Heat treated Titanium diaphragm
| 15” two-way passive touring speaker
ST-15 loudspeaker is suitable for near field main PA reinforcement with
or without subwoofer, portable system or permanent installation, wall,
stand, or suspension, monitoring for vocals and instruments, side fill in
small stages, delay fill or under balcony complementary diffusion.
Flying Hardware
Pole Mount
35mm Aluminium pot
2pcs NEUTRIK Speakon NL4
• 500W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 50° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
12x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 18
mm / 24 mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
735 x 445 x 409 mm
28 kg net
31 kg gross
15” two-way passive touring speaker |
The loudspeaker shall be a passive, 2 way type consisting of one 15”
maximum SPL shall be 126dB continuous / 130dB peak. Nominal
(380mm) direct radiating reflex loaded low frequency transducer and
impedance shall be 8Ω. The multi-angled enclosure shall be of a void
one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver
free multi-laminate birch ply construction with sealed internal bracing,
that is mounted on a constant directivity elliptic fiberglass horn that
35mm pole mount and threaded M8 inserts for wall and suspension.
provides a nominal coverage angle of 80° (horizontal) by 50° (vertical).
The screws shall be Stainless Steel 316L with 200 hours coating per
The frequency response shall be 48 to 18500Hz in half space with
ASTM-B117. The finish shall be a black matt multi layer HardTex
less than ±3dB variation. Low and high frequency sections shall be
water based painting with hardness higher than 75Hv. The front of
integrated by an internal 2kHz passive crossover network with 400v
the enclosure shall be protected by a black matt dual layer coated
polypropylene capacitors, Air core inductors on HF, aluminium housed
(powder + acrylic) 1.5 mm thick steel acoustically transparent grille.
resistors and 24dB/oct slopes. Power handling shall be 500W RMS,
Dimensions shall be (HxWxD) 735 x 445 x 409 mm and Weight 28kg.
2000W peak by EIA 426A standard (8 hours pink noise). Average
The loudspeaker shall be the Fane Pro Audio ST-15
wideband (200-16000Hz) efficiency on axis shall be 99dB/1W/1m and
© 2013, Fane International Ltd. Fane operate a policy of continuous product development and reserve the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev. 290914
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF