User Guide EZ SOUND BAR
EZ SOUND BAR
User Guide
2.1Channel Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
TM
Wireless
AUDIO
CAUTION
ƒƒ Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
ƒƒ This User Guide includes detailed usage instructions for your product. Please read this manual thoroughly.
ƒƒ Figures and illustrations in this User Manual are provided for reference only and may differ from actual
equipment appearance. Equipment design and specifications may be changed without notice.
2
Getting Started
Contents
Safety Information ------------------------------------------------- P 3
TM
Wireless
AUDIO
Important Safety Instructions
The illustrations may differ slightly from the items shipped with your product.
Unique features ----------------------------------------------------- P 6
Accessories
Introduction
Front panel ----------------------------------------------------------- P 7
Rear panel ------------------------------------------------------------ P 8
Mounting Information
Installing the Wireless Subwoofer ----------------------------- P 9
Optional equipment connections ----------------------------- P 10
Basic operations --------------------------------------------------- P 11
Sound adjustments ----------------------------------------------- P 12
Use of the Wireless Subwoofer ---------------------------------P 14
Trouble Shooting ---------------------------------------------------P 15
Specifications
Maintenance -------------------------------------------------------- P 18
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL ONLY.
CAUTION
RISK OF EXPLOSION IF BATTERY BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
The slots and openings in the product are provided for necessary ventilation. To
ensure reliable operation of this product, and to protect it from overheating, these
slots and openings must never be blocked or covered.
Do not cover the slots and openings with a cloth or other materials.
Make sure that the IFTD that this product is installed on has ample ventilation and is
not restricted in any way.
Do not place this product near or over a radiator or heat resistor, or where it is
exposed to direct sunlight.
Do not place heat generating items such as candles, ashtrays, incense, flammable gas
or explosive materials near the product.
Do not place a water containing vessel on this product, as this can result in a risk of
fire or electric shock.
Do not expose this product to rain or place it near water (near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this
product accidentally gets wet, unplug it and contact an authorized dealer immediately.
3
4
5
Getting Started
This product uses batteries. In your community there might be regulations that
require you to dispose of these batteries properly under environmental legislations.
Please contact your local authorities for disposal or recycling information.
Do not exceed the standard capacity of a multi-plug or power outlet extension when
using it for this product. There is a danger of electric shock or fire hazard.
To protect this product from a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet. This will prevent
damage to the set due to lightning and power line surges.
Never insert anything metallic into the open parts of this product. Doing so may
create a danger of electric shock.
Do not touch the power cord with wet hands. There is a danger of electric shock.
Plug the power cord firmly into the power outlet. Failure to do so may cause a fire hazard.
Do not unplug the power cord by pulling the cable only. If the cord is damaged, it
may cause electric shock.
If this product does not operate normally - in particular, if there are any unusual
sounds or smells coming from it - unplug it immediately and contact an authorized
dealer or service center.
Be sure to pull the power plug out of the outlet if the product is to remain unused or
if you are to leave the product for an extended period of time. Accumulated dust can
cause an electric shock, an electric leakage or a fire by causing the power cord to
generate sparks and heat or the insulation to deteriorate.
Be sure to contact an authorized service center, when installing your product in
a location with heavy dust, high or low temperatures, high humidity, chemical
substances and where it operates continuously for 24 hours such as an airport, a
train station etc. Failure to do so may cause serious damage to your product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Getting Started
When installing this product, check that the IFTD you are installing it to is in a stable
location, and the IFTD itself has been installed properly and securely.
Do not drop or impart any shock to the product. If the product is damaged,
disconnect the power cord and contact a service center.
Make sure to pull out the power cord from the outlet before cleaning the product.
Do not overload the actuators – this can cause danger of personal injury and damage
to the system
Do not use the system in environments other than the intended indoor use. When
using and installing this product, please take a common sense approach.
6
7
Getting Started
Getting Started
Introduction
Unique features
Symbols used in this manual
1) Exclusive IFTD Interface
Note
Indicates special notes and operating features.
2) Wireless Audio
3) Wireless Subwoofer
Caution
Indicates cautions for preventing possible damage from abuse
4) QBS Sound Field Technology
Front panel
Accessories
Please check and identify the supplied accessories. Designs and specifications of the
accessories are subject to change without prior notice
Key Descriptions
MUTE
If you want to mute the audio press this key. When the EZ Sound Bar is muted a blue light will flash at
one second intervals. To un-mute the audio press the mute key again.
IFTD cable
User Guide
Function (select the function and input source)
If you want to change the Function and Display modes, press this key. If you want to activate the Find
mode, press this key for approximately 2 seconds.
AC/DC
ADAPTE
R
IFTD Mount Bracket
Volume
━ If you want to increase the volume level press this key.
╬ If you want to decrease the volume level press this key.
AC Adapter
Screws(4)
Power cord
Wireless Audio
If you want to listen to a Bluetooth Audio device, press this key and find and then select D3 AUDIO.
8
9
Getting Started
Getting Started
Rear Panel
Installation
Connect the supplied IFTD cable form the soundbar IFTD port to the IFTD SB port.
If you would like to use the Wireless Subwoofer in conjunction with the Soundbar, you
must connect the DC 48V into the Wireless Subwoofer's DC jack.
DC 19V
IFTD
DC Jack : DC 19V(Optional)
USB : Only Download new firmware
1
USB OPT PTB
PTB : PorTaBle
OPT : OPTical
IFTD : For Connecting the IFTD Set
Caution - DC 19V(Optional) :Do not plug in the enclosed DC 48V adaptor
Mounting
You can mount the main unit on to the IFTD. You can also detach the unit from the IFTD
1
DC 19V
2
IFTD
USB
OPT
PTB
2
Screws
APTE
R
2. Slide the Soundbar onto the bracket.
AC/D
C AD
1. Mount the bracket to the bottom of the IFTD using the four screws provided.
10
11
Getting Started
Getting Started
Optional Equipment Connections
Basic Operation
Operation Mode Description
DC 19V
IFTD
USB
OPT
PTB
External Port Arrangement
PTB IN connection - Connect PTB Port by using the audio cable.
OPTICAL IN connection - Connect OPT port by using
the OPTICAL cable
Listening to music from your portable player.
- After you connect the adaptor cable, select the OPTICAL or PORTABLE function by
using the
key
- Play the device after turning on the Power.
Using Wireless Audio Technology
Listening to music stored on Bluetooth devices.
1. Press the wireless audio key
on the EZ Sound Bar.
The green light will begin to flash.
2. On your BT device find and select D3 Audio
3. Select and pair. The green LED should now be constant.
4. Enjoy your music.
If you press the
key it displays the current mode.
If you want to change to another mode, press the
and select the mode you want. Mode details below:
1.
2.
3.
4.
key for about 2 seconds
IFTD mode : Play the IFTD Sound.
OPTICAL mode : Play the external optical device sound.
WIRELESS mode (Bluetooth mode) : Play a wireless device (Bluetooth)
PORTABLE mode : Play an external portable device.
LED Display Colour and OSD Display
OSD Display
LED Display Color
IFTD
BLUE
OPTICAL
BLUE+GREEN
Wireless Audio
GREEN
PORTABLE
RED
IFTD
OPTICAL
BLUETOOTH
PORTABLE
12
13
Operation
Getting Started
Sound Adjustments
IFTD settings
Sound Effect Options
2▶
SB loudness
1. SB loudness improves the bass and treble sound
2. This mode is controlled by selecting ON or OFF.
SB virtual surround
1. SB Virtual surround allows you to enjoy a more immersive and cinematic
surround sound experience
2. This mode is controlled by selecting ON or OFF.
SB bass
1
Sound Adjustment Setting menu
Sound bar adjustments have five sound effect settings
SB MP3 enhancement
Setting sound effect
1. Select the OPTION menu. 1
2. Select the IFTD option on the touch display.
3. Find and Select the desired sound effect
1. SB bass improves bass.
2. This mode is controlled by selecting ON or OFF.
2
1. SB MP3 enhancement is for MP3 up-scaling. When listening to MP3 files or
other compressed music, you can enhance the sound.
2. This mode is controlled by selecting ON or OFF.
SB dialog clarity
1. SB dialog clarity improves the clarity of voices and speech.
2. This mode is controlled by selecting ON or OFF.
14
15
Operation
Operation
Note
Use of the Wireless Subwoofer
Wireless Subwoofer Setup
1. Connect the power cord of the wireless subwoofer to the outlet.
2. Turn on the main unit : The main unit and wireless subwoofer will be automatically
connected.
Troubleshooting
Problem
No power
Pairing Manually
Cause & Correction
1. The power cord(IFTD I/F Cable) is not plugged in. Plug in the power
connector (IFTD I/F Cable).
2. Check for electricity failure. Check the condition by operating
other electronic devices.
1. Check whether the right function is selected. selected. Press the
If your connection is not completed, you will still see the red LED on the
subwoofer. The subwoofer will also not make the "pairing" sound. This means
that you need to manually pair the device instead.
1. Press and hold the
and
key simultaneously. The LEDs will begin to Flash.
2. Press the pairing key on the subwoofer.
3. Pairing should occur automatically. If the device has paired the LED lights should now
be constant.
4. If pairing has not occured retry steps 1 to 3 again.
No sound
F Key and check the selected function.
2. IFTD I/F Cable is not connected correctly.
Connect IFTD I/F cables correctly.
3. The mute function is activated. Press MUTE or adjust the volume
level to cancel the mute function.
1. When the sound bar FUNC is IFTD, change the Audio Volume level
Low Quality or Low
Sound Output
on IFTD(OPS or Android or External Input)
2. When the sound bar FUNC is OPT or PTB, change the audio
volume level on the player.
3. When the sound bar FUNC is Wireless Audio, change the audio
volume on the Bluetooth device
Specifications
Pairing key
1-1. Features
Speaker
Audio Input
Sound Effect
300W 2.1ch Wireless Subwoofer
(Stereo 70W+70W / Wireless Subwoofer 160W)
IFTD-IF / Optical / Portable / Bluetooth
Loudness / Virtual Surround / Bass Booster / MP3 Enhancement
/ Dialog Clarity
16
17
Operation
Operation
1-2. Input/Output
Mechanical
9Pin D-SUB JACK
IFTD-IF (Interface)
3 V (p-p), Optical jack x 1
OPTICAL IN
0.5 VRMS (3.5 mm stereo jack)
PORT. IN
USB
For F/W Update
Wireless Audio
Bluetooth Audio
Amplifier (Stereo)
Stereo mode
45W+45W (Mid 4 Ω), 25W+25W (Tweeter 6 Ω)
Subwoofer (Wireless)
Type
Impedance Rated
Output Power
Carrier Frequency
RF Output Power
1Way 1Speaker
8Ω
160W
Wireless RF Module Specification
5.8G ISM Band (5.730 ~ 5.845GHz)
7dBM ±2dB (Peak power at Antenna port)
RF modulation
GFSK
-20 dB bandwidth
2MHz
Sensitivity
-85dBm
Outline dimension(mm)
Product weight (Kg)
Outline dimension(mm)
Product weight (Kg)
Packing dimension (mm)
Packing weight (Kg)
Reliability
Power input range
power consumption
Standby power
Temperature
Humidity
Stereo
1200 x 90 x 70
6Kg
Subwoofer
315.3 x 260 x 370
Soundbar : 6Kg , Subwoofer : 9.5 Kg
1250*350*515
20kg
Stereo : DC 18~19V From Set
Subwoofer : DC 48~49V/2A Adapter
Stereo : 35W
Subwoofer : 35W
Stereo : < 0.5W (0W When Mounted to IFTD)
Subwoofer : < 0.5W
Operating : 5~35℃
Storage : -10~50℃
Operating : 5~90%
Storage : 5~90%
18
19
Operation
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the
unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Cleaning the unit
Do not use volatile liquids such as insecticide spray near the unit.
Wiping with strong pressure may damage the surface.
Do not leave rubber or plastic products in contact with the unit for a long period of time.
Operation
Date of Purchase
www.d3world.net
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising