VX 1035S CATV Amplifier
VALUE LINE
VX 1035S
CATV Amplifier
About VX 1035S
The VX 1035S is a locally powered in-house amplifier with a frequency
range up to 1,0 GHz. It is equipped with an active output and a test
point at the input and output. Diplex filter and return path amplifier
are consolidated on one module (VX 102 0650) 65 MHz. All settings
will be done by non-interruptible Q-Step switches and jumper.
Features
Compact 1GHz high level CATV amplifier
Diplex filter and return amplifier on one module pluggable
All settings (att, slope, etc.) interrupt free by rotary switch and Jumper
Block Diagram
www.wisi.se
VX 1035S
CATV Amplifier
Technical Specifications
Downstream / DS – with module VX102-065*
Upstream / US – with module VX102-065*
Frequency range
Frequency range
5 - 65 MHz*
Gain
30dB (jumper 22/30dB)
– without module, BI Bypass
47 - 1006 MHz (jumper)
– with VX201-065
85 - 1006 MHz
– frequency response
Gain
typ. ± 0,5 dB max. ± 0,7 dB
Output
36 dB ± 0,75 dB (jumper)
– with VX201-065
34 dB ± 0,75 dB
– frequency response
typ. ± 0,5 dB max. ± 0,8 dB
– attenuator
0 - 22,5 dB / 1,5 dB (switch 16 Steps)
Interstage
– equalizer
Input
0 / 1,5/ 3 / 4,5/ 6 dB (Jumper)
echnical modifications reserved. WISI cannot be held liable for any printing errors • Version: 2017-01-11
– without module, BI Bypass
Output level EN50083
– cable sim
0 / 5/ 10 dB (jumper)
– DIN - IMA2
typ. 108 min. 106 dBµV
– attenuator
0 - 22,5 dB / 1,5 dB (switch 16 Steps)
– DIN - IMA3
typ. 114 min. 112 dBµV
– equalizer
0 - 22,5 dB / 1,5 dB (switch 16 Steps)
Noise
< 6dB (22dB-gain)
< 4,5dB (30dB-gain)
Ingress control switch ICS**
0 / 6dB / 40dB
Interstage
0 / 10 dB (Jumper)
(85-862 MHz = 9dB)
– slope
*
Output level
other frequency rang on request
only use with EN xxx Receiver
**
– Cenelec 42 Ch. Flat
113 dBµV / CTB/CSO ≥60dB
– Cenelec 42 Ch. slope
*
Noise
115 dBuV / CTB/CSO ≥60dB
typ. 6 dB max. 7,5 dB
RF test point
– output
-20 dB ± 0,75 dB
– input
-20 dB ± 1,5dB
General specifications
RF connectors
F
Impedance
75 Ohm
Return loss
≥18 dB -1,5 dB/Oct
Supply voltage
230 VAC ±10%
Power consumption
– without VX-module
<15 W
– with VX201-065
<16 W
Ambient temperature
-20°... +55°C
Storage temperature
-25°…+75°C
Protection class
IP65
EMV
EN50083-2
Surge protection RF-Ports
2 kV - EN61000-4-5 1,2/50µs pulse
Dimensions W x H x D
163 x 90 x 47 mm
WISI Norden AB • Teknikringen 1B • 583 30 Linköping, Sweden • phone: +46 (0)13 21 09 00 • email: info@wisi.se • support: www.wisiconnect.tv
www.wisi.se
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising