Isotemp™ Shake Touch
Isotemp™ Shake Touch
Insert Image
Here
Isotemp™ Cooling Shake Touch
Isotemp™ Cooling Shake Touch
The Fisher Scientific™ Isotemp™ Cooling Shake Touch is designed for
applications that require consistent and precise results. With heating,
cooling and shaking capabilities, the Fisher Scientific™ Isotemp™ Cooling
Shake Touch uses interchangeable blocks to accommodate a wide variety
of tubes and microplates. The easy-to-use 4.3” color LCD touch screen
allows the user to save and visibly track progress through the live status
bar for five user defined programs, each with five individual steps. The
unit’s enhanced electronics and dual temperature sensors provide
accurate, dependable temperature settings across the operating range.
Operating Features:
Low profile design: The low profile design minimizes the unit’s footprint on
the bench.
>> Intuitive 4.3” color LCD touch screen
>> Ability for rapid heating, cooling and high speed shaking
>> Internal memory stores five separate 5-step programs
>> Supplied with 1.5mL block
Specifications and Ordering Information
Temperature Range:
17°C below ambient to 100°C
Temperature Accuracy:
± 0.5°C between 20°C and 45°C
± 2°C below 20°C and above 45°C
Speed Range:
300 to 3000rpm
Speed Accuracy:
± 2%
Timer:
1 minute to 99 hours, 59 minutes
Orbit:
3 mm (0.12”)
Heating Rate:
5 °C/min
Cooling Rate:
above ambient: 2-3 °C/min
below ambient: 0.5-1.0 °C/min
Overall Dimensions (L x W x H):
10.6 x 10.3 x 5.4”
(26.9 x 26.2 x 13.7cm)
Ship Weight:
11.5lbs (5.2kg)
Ordering Information
Unit includes a 92” (234cm) detachable, 3-wire cord and plug (230 volt units are
supplied with Euro type plug). Unit is also supplied with a 1.5mL block, a rack and
a cover. 2 year limited warranty on parts and labor. Eppendorf™ Thermomixer
R™ blocks are compatible on the Fisher Scientific™ Isotemp™ Cooling Shake
Touch.
Optional NIST traceable certificate: Includes a 3 point NIST traceable calibration.
The traceable certificate includes actual calibration measurement data and
uncertainty. The calibration laboratory is ISO/IEC 17025 compliant.
PID temperature controller: Maintains precise temperature control from
17°C below ambient to 100°C. Easy-to-use controls allow user to adjust
temperature in 0.1° increments.
LCD touch screen: Enables faster setting of temperature, speed and time,
which can all be viewed at once. Display features on-screen help topics with
operational tips. Touch screen is compatible with rubber gloves used in labs.
USB port can transfer information to a flash drive for data logging, program
storage and software updates.
Program control: Program control capabilities allow user programmable
operation for automated use and memory for five separate, 5-step programs.
Unlimited if using the USB.
Temperature ramp rate: Adjustable temperature ramp rate feature separately
defines the heating and cooling rates in increments of 0.5°C/min.
Single point calibration mode: For maximum temperature accuracy,
the single point calibration procedure allows the user to calibrate up to 6
different defined temperatures.
Pulse mode feature: The unit is equipped with a pulse mode feature ideal for
quick vortex applications.
Safety Features:
Cool touch housing: Constructed from a high-quality heat and chemical
resistant polymer. The unit’s housing remains cool to the touch throughout
normal operating temperatures.
Maximum temperature limiting function: Ensures the temperature will not
exceed user defined limits allowing control of temperature sensitive samples.
Hot top indicator: A hot top warning will illuminate when the temperature
reaches 40°C and will remain lit until the unit is cooled below 40°C.
Audible alarm: In timed mode, an alarm will sound if the timer reaches zero
or set-point temperature is reached. Additionally, the heat function will
automatically shut off if the unit recognizes an internal issue.
Operating Conditions:
Unit can operate in conditions from 5 to 35°C (41 to 95°F), maximum 80%
relative humidity, non-condensing.
Applications:
Cell cultures, DNA, RNA, hybridization, and protein studies.
Description ElectricalCat. No.
2
Isotemp Cooling Shake Touch
120V | 1.8 amps | 215 watts
02-217-737
Isotemp Cooling Shake Touch
230V | 0.9 amps | 210 watts
02-217-738
Isotemp Cooling Shake Touch with NIST Traceable Certificate
120V | 1.8 amps | 215 watts
02-217-739
Isotemp Cooling Shake Touch with NIST Traceable Certificate
230V | 0.9 amps | 210 watts
02-217-740
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
Isotemp™ Shake Touch
Insert Image
Here
Isotemp™ Shake Touch
The Fisher Scientific™ Isotemp™ Shake Touch is designed for applications
that require consistent and precise results. With heating and shaking
capabilities, the Fisher Scientific™ Isotemp™ Shake Touch uses
interchangeable blocks to accommodate a wide variety of tubes and
microplates. The easy-to-use 4.3” color LCD touch screen allows the user
to save and visibly track progress through the live status bar for five user
defined programs, each with five individual steps. The unit’s enhanced
electronics and temperature sensor provide accurate, dependable
temperature settings across the operating range.
Operating Features:
Low profile design: The low profile design minimizes the unit’s footprint on
the bench.
>> Intuitive 4.3” color LCD touch screen
>> Ability for rapid heating and high speed shaking
>> Internal memory stores five separate 5-step programs
>>Supplied with 1.5mL block
Specifications and Ordering Information
Temperature Range:
4°C above ambient to 100°C
Temperature Accuracy:
± 1°C between 20°C and 45°C
± 2°C above 45°C
Speed Range:
300 to 3000rpm
Speed Accuracy:
± 2%
Timer:
1 minute to 99 hours, 59 minutes
Orbit:
3 mm (0.12”)
Heating Rate:
5 °C/min
Overall Dimensions (L x W x H):
10.6 x 10.3 x 5.4”
(26.9 x 26.2 x 13.7cm)
Ship Weight:
11.5lbs (5.2kg)
PID temperature controller: Maintains precise temperature control from
4°C above ambient to 100°C. Easy-to-use controls allow user to adjust
temperature in 0.1° increments.
LCD touch screen: Enables faster setting of temperature, speed and time,
which can all be viewed at once. Display features on-screen help topics with
operational tips. Touch screen is compatible with rubber gloves used in labs.
USB port can transfer information to a flash drive for data logging, program
storage and software updates.
Program control: Program control capabilities allow user programmable
operation for automated use and memory for five separate, 5-step programs.
Unlimited if using the USB.
Temperature ramp rate: Adjustable temperature ramp rate feature separately
defines the heating rates in increments of 0.5°C/min.
Single point calibration mode: For maximum temperature accuracy,
the single point calibration procedure allows the user to calibrate up to 6
different defined temperatures.
Pulse mode feature: The unit is equipped with a pulse mode feature ideal for
quick vortex applications.
Safety Features:
Cool touch housing: Constructed from a high-quality heat and chemical
resistant polymer. The unit’s housing remains cool to the touch throughout
normal operating temperatures.
Maximum temperature limiting function: Ensures the temperature will not
exceed user defined limits allowing control of temperature sensitive samples.
Hot top indicator: A hot top warning will illuminate when the temperature
reaches 40°C and will remain lit until the unit is cooled below 40°C.
Ordering Information
Unit includes a 92” (234cm) detachable, 3-wire cord and plug (230 volt units are
supplied with Euro type plug). Unit is also supplied with a 1.5mL block, a rack and
a cover. 2 year limited warranty on parts and labor. Eppendorf™ Thermomixer
R™ blocks are compatible on the Fisher Scientific™ Isotemp™ Shake Touch.
Optional NIST traceable certificate: Includes a 3 point NIST traceable calibration.
The traceable certificate includes actual calibration measurement data and
uncertainty. The calibration laboratory is ISO/IEC 17025 compliant.
Audible alarm: In timed mode, an alarm will sound if the timer reaches zero
or set-point temperature is reached. Additionally, the heat function will
automatically shut off if the unit recognizes an internal issue.
Operating Conditions:
Unit can operate in conditions from 5 to 35°C (41 to 95°F), maximum 80%
relative humidity, non-condensing.
Applications:
Cell cultures, DNA, RNA, and protein studies.
Description ElectricalCat. No.
Isotemp Shake Touch
120V | 1.8 amps | 215 watts
02-217-741
Isotemp Shake Touch
230V | 0.9 amps | 210 watts
02-217-742
Isotemp Shake Touch with NIST Traceable Certificate
120V | 1.8 amps | 215 watts
02-217-743
Isotemp Shake Touch with NIST Traceable Certificate
230V | 0.9 amps | 210 watts
02-217-744
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
3
Accessories
Microplate Block
Sample Type
No. of Wells
Well Diameter
Well Depth
1
5.06 x 3.38” (12.9 x 8.6cm)
1.00” (2.5cm)
Sample Type
No. of Wells
Well Diameter
Well Depth
0.5mL Tubes*
30
0.312” (0.79cm)
1.01” (2.57cm) 5.7 x 4.1 x 1.8” (14.5 x 10.4 x 4.6cm)
02-217-746
1.5mL Tubes*
24
0.438” (1.11cm)
1.32” (3.35cm) 5.7 x 4.1 x 2.1” (14.5 x 10.4 x 5.3cm)
02-217-747
2.0mL Tubes*
24
0.454” (1.15cm)
1.32” (3.35cm) 5.7 x 4.1 x 2.1” (14.5 x 10.4 x 5.3cm)
02-217-748
5-7mL Tubes
24
0.472” (1.20cm)
1.35” (3.43cm) 5.7 x 4.1 x 2.2” (14.5 x 10.4 x 5.6cm)
02-217-749
No. of Wells
Well Diameter
24
0.496” (1.26cm)
No. of Wells
Well Diameter
15mL Conical Tubes
9
0.680” (1.73cm)
4.02” (10.2cm) 5 x 4 x 5” (12.7 x 10.2 x 12.7cm)
02-217-751
50mL Conical Tubes
4
1.180” (3.00cm)
3.89” (9.88cm) 5 x 4 x 5” (12.7 x 10.2 x 12.7cm)
02-217-752
Microplate Thermal Block
with Lid
Dimensions
6.5 x 4.75 x 4” (15.2 x 10.2 x 5.1cm)
Cat. No.
02-217-745
Tube Blocks
Dimensions
Cat. No.
* Supplied with rack and cover
Cryo Tube Block
Sample Type
2.0mL Cryo Tubes
Well Depth
Dimensions
1.34” (3.40cm) 5.7 x 4.1 x 2.2” (14.5 x 10.4 x 5.6cm)
Cat. No.
02-217-750
Conical Tube Blocks
Sample Type
4
Well Depth
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
Dimensions
Cat. No.
Industry Standard
Fisher Scientific Introduces The New Industry Standard
The all new Fisher Scientific™ Isotemp™ Shake Touch line offers industry leading performance, features, and experiment traceability
that is unmatched in the marketplace.
The Temperature Ranges Will Take Your Experiments Further
The maximum attainable temperature is 1.5˚C higher than the industry standard.
The lowest attainable temperature is 4˚C lower than the industry standard.
The Ramp Rates Will Get You There Faster
The Fisher Scientific™ Isotemp™ Cooling Shake Touch will get you to your set-point faster; but, if your experiment requires a little more care, you can adjust these
heating and cooling rates according to your needs.
Cooling rates as much as 4˚C/minute faster than the industry standard.
Heating rates as much as 1.2˚C/minute faster than the industry standard.
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
5
Insert Image
Here
Industry Standard
Touch Screen Technology
•
•
•
•
Resistive touch technology always works – even with gloves
Touch panel is sealed for easy cleaning
Simple USB data logging for process verification
Manual calibration is easy and intuitive
Help available on every screen in 6
languages: English, Spanish, French,
Portuguese, German, and Italian
<
Clear 4.3” LCD screen
is easy to view from a
distance
Program tracking provides
clear visual progress
Temperature and speed
settings are easy and
intuitive
>
>
>
>
<
Intuitive interface makes for easy operation and programming
6
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
Active settings are
always visible
Other Quality Fisher Scientific Products
Specifications and Ordering Information
Speed
range:
On Mode:
300 to 2500 rpm
Orbit:4.9mm
Touch Mode:
300 to 3500 rpm
Controls:
3-way power switch
speed knob: variable 1 to 10 dial marks
Weight Capacity:
2.5 lbs (1.1 kg)
Overall dimensions (L x W x H):
9.5 x 6.6 x 6.3”
(24.1 x 16.8 x 16cm)
Electrical (50/60 Hz):
120 volts, 0.25 amps, 30 watts
Ship Weight:
15 lbs (6.8 kg)
Description Cat. No.
Standard Heavy-Duty Vortex Mixer, 120V
02-216-108
Fisher Scientific Standard Heavy-Duty Vortex Mixers
>> Designed for continuous duty
>> Variable speed
The Fisher Scientific Standard Heavy-Duty Vortex Mixer is a variable speed analog mixer that is
designed for continuous duty. The heavy-duty design and efficient motor allow this mixer to operate
in continuous duty and handle all accessories over the entire speed range. Choose from two modes of
operation: “Touch” mode for mixing tubes when cup head or Universal Holder with cover is depressed,
or “On” mode when using any of the accessory attachments for continuous operation. Mixer includes
a cup head, Universal Holder with cover, and foam micro-tube insert for (38) 1.5 to 2.0 ml micro-tubes.
Specifications and Ordering Information
Speed range:
On Mode:
Touch Mode:
300 to 2500 rpm
300 to 3500 rpm
Orbit:4.9mm
Controls:
3-way power switch, LED display for time/speed
up/down keys for set-point control
Shown with optional four
plate holder 02-216-121
and stackable four plate
holder 02-216-122
>> Designed for continuous duty
>> LED displays for speed and time
Weight Capacity:
2.5 lbs (1.1 kg)
Overall dimensions (L x W x H):
9.5 x 6.6 x 6.3”
(24.1 x 16.8 x 16cm)
Electrical (50/60 Hz):
120 volts, 0.25 amps, 30 watts
Ship Weight:
15 lbs (6.8 kg)
Description Advanced Heavy-Duty Vortex Mixer, 120V
Cat. No.
02-216-109
Fisher Scientific Advanced Heavy-Duty Vortex Mixers
The Fisher Scientific Advanced Heavy-Duty Vortex Mixer is ideal for applications that demand
repeatable results. Mixer features touchpad controls and LED displays for accurate speed (rpm) and
time (minutes and seconds) results. The heavy-duty design and efficient motor allow this mixer to
operate in continuous duty and handle all accessories over the entire speed range. Choose from two
modes of operation: “Touch” mode for mixing tubes when cup head or Universal Holder with cover is
depressed, or “On ”mode, when using any of the accessory attachments for continuous operation.
Microprocessor control maintains set speed for strong, consistent mixing action. Timer will display
elapsed time or when programmed to user defined time limits, the unit will shut off when time reaches
zero. Mixer includes a cup head, Universal Holder with cover, and foam micro-tube insert for (38) 1.5
to 2.0 ml micro-tubes.
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
7
Isotemp™ Shake Touch
BN0912132
Fisher Scientific • 1-800-766-7000 • www.fishersci.com
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising