FiberPlex SFP-HHDVT-0000-L
FiberPlex SFP-HHDVT-0000-L
SFP 3GBPS SDI TO HDMI/DVI CONVERTER SINGLE TRANSMITTER, MSA, TYPE D CONNECTOR
Description
The SFP-HHDVT-0000-L is an electrical
SFP transmitter module designed to
convert SDI signals to an HDMI/DVI (High
definition multimedia interface®/Digital
Visual Interface) output without scaling
artifacts. A copy of the reclocked SD/
HD/3G-SDI source is loopback to the host.
Up to 8 channel of audio is supported and
embedded in the HDMI signal.
The SFP-HHDVT-0000-L provides module
identification information, configuration
and diagnostic monitoring through a
2 wire serial interface. It is also a hotpluggable solution for field system
upgrade and maintenance.
The SFP-HHDVT-0000-L is interchangeable with other MSA optical video SFP, coaxial SFP and
SFP converter improving product flexibility. Ganged cages, belly-to-belly and superposed cage
mountings are supported. The module provides reduced development risk and cost.
The SFP-HHDVT-0000-L is Pb-free and ROHS compliant.
Summary of Benefits
Flexibility: Build a totally optimized system by mixing electrical SDI, NTSC/PAL converter, HDMI/DVI
and optical video SFP
Cost: Design cost effective system
Modularity: Allow hot scalability and replacement of critical components wherever possible
Density: Highest density ever achieved for SDI to HDMI/DVI and HDMI/DVI to SDI converters
Interchangeable: Fully compatible with existing MSA video optical SFP, SDI SPF and SFP converters
Hot-Pluggable: Swap without affecting system behavior
Advanced Packaging: Support ganged cages, belly-to-belly and superposed cages mounting
Green: The SFP-HHDVT-0000-L is Pb-free and ROHS compliant
Typical Applications
• Multi-channel/multi-media transport with WDM-16
• Cost effective SDI monitoring solution
• Processing cards
• SDI switchers
• Video routers
• Broadcast cameras
Video
Features:
• S MPTE 424M, 292M and 259M
compliant
• SDI Reclocked Loopback to host
connector
• Supported format: 525/625,
– 720p/1080i (50/59.94/60Hz),
– 1080p (23.98/24/15/29.97/30/50/5
9.94/60Hz)
• HDMI/DVI Output:
– 24 bit (3x8 bits)
– RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
– BW = 150Mhz
– RGB Range (Full/SMPTE)
– Up to 8 channel audio de-embedding (PCM)
– HDMI 1.4 Type D connector
– HDMI Type D plug with retention
• Control via serial interface including:
– Voltage & Temperature Monitoring
– HDMI/DVI interface configuration
– EDID reading, Audio mapping
– Module Information
• L ow Power Consumption
• S ingle Supply +3.3V
58.5mm x 13.4mm x 8.6mm SFP
Package
Operating temperature: 0°C to 70°C
Used With
Model
Description
WDM-16
Wave Division
Multiplexer
FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • sales@fiberplex.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising